Vol. 41, No. 3, 2021

Russian Engineering Research

Force Distribution in Planetary Pinion Gears

M. M. Ermolaev, M. N. Zakharov and Yu. V. Sinitsyna p. 189 abstract

Heating of Polyurethane Shock Absorber in Cyclic Loading

S. N. Yakovlev p. 194 abstract

Model of a Triangular Caterpillar Drive and Analysis of Vertical Vehicle Dynamics

V. I. Poddubnyi, A. Trächtler, A. Warkentin and C. Henke p. 198 abstract

Influence of Layer Motion in a Three-Layer Structure on Its Stress–Strain State

O. M. Ustarkhanov, Kh. M. Muselemov, T. O. Ustarkhanov and Kh. M. Gapparov p. 202 abstract

Improved Wear Resistance of the IGR Shutoff Valve in Oil and Gas Pipelines

I. N. Karelin, V. D. Sedykh and L. V. Sedykh p. 206 abstract

Permissible Measurement Error in Monitoring the Shape and Position of Surfaces

N. Zh. Shkaruba and O. A. Leonov p. 211 abstract

Fiber Metal Laminates Based on Aluminum–Lithium Alloy Sheets in New-Generation Aircraft

E. N. Kablov, V. V. Antipov, R. I. Girsh, N. Yu. Serebrennikova and A. N. Konovalov p. 215 abstract

Influence of Ultrasonic Finishing on the Surface Roughness of Tool-Steel Components

V. I. Malygin, Yu. I. Kuvaldin, N. S. Oblovatskaya, E. N. Lapteva and V. A. Slutskov p. 222 abstract

Pressure Welding of Shells with Creep and Plasticity

V. I. Platonov, V. N. Chudin and P. V. Romanov p. 227 abstract

Inductive Heating in the Quenching of High-Speed Steel Tools

A. M. Adaskin p. 231 abstract

Mechanics of Microcutting and Stagnant-Zone Formation

D. S. Rechenko and D. G. Balova p. 236 abstract

Stochastic Model of Cutting-Tool Failure Based on the Level of Vibration

N. I. Pas’ko, A. V. Antsev and E. S. Yanov p. 240 abstract

Dynamics of Tool Deformation in the Cutting System

V. L. Zakovorotnyi, V. E. Gvindjiliya and V. P. Lapshin p. 246 abstract

Diagnostics of the Tool Condition in Metal-Cutting Machines by Means of Recurrent Neural Networks

K. A. Masalimov, R. A. Munasypov, S. I. Fetsak and R. G. Kudoyarov p. 252 abstract

Optimizing the End Milling of Flow Paths in a Gas-Turbine Compressor

D. I. Volkov and S. M. Kozhina p. 257 abstract

Controlling the Accuracy in Contour Milling

V. A. Timiryazev, M. Z. Khostikoev, I. K. Danilov and A. G. Datsko p. 262 abstract

More Accurate Machining by Means of Parallel Kinematics

B. A. Enikeev, O. K. Akmaev and R. G. Kudoyarov p. 266 abstract

Coatings to Improve Hole Production by Mandrels

M. F. Selemenev, S. A. Velichko, I. N. Kravchenko, Yu. A. Kuznetsov and A. V. Martynov p. 269 abstract

Manufacture of Narrow Thin-Walled Super Invar Pipe

V. I. Trifanov, O. A. Sukhanova, M. G. Melkozerov, A. A. Khodenkov and I. V. Trifanov p. 272 abstract

Information Environment for the Design of Industrial Processes

L. L. Khoroshko and P. M. Kuznetsov p. 277 abstract

Expert Assessment of Approaches to Connectivity in Russia’s Arctic Regions

A. O. Shemyakov, V. G. Vladimirova and I. V. Zadorin p. 281 abstract