Vol. 37, No. 3, 2017
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.
Evolution of Methods of Assessing the Accuracy of Metal-Cutting Machines
p. 171 abstract
Electrical Roasting Systems with Vibrational Batch Supply
p. 180 abstract
Automatic Control of a Stepless Mechanical Transmission with an Internal Force Function
p. 185 abstract
Thermal Model of Spindles on Rolling Bearings
p. 189 abstract
Hybrid Laminated Materials with Slow Fatigue-Crack Development
p. 195 abstract
Influence of the Microprojection Geometry on the Elastic Contact of Surfaces with Regular Microrelief
p. 200 abstract
Self-Lubricating Bearings Based on Compound Epoxy Fluoroplastics
p. 206 abstract
Improving the Life of Artillery Systems
p. 211 abstract
Molybdenum-Coated Blanks for Reliable Frictional Disks in Oil-Filled Transmissions
p. 218 abstract
Protection of Standard Network Protocols of Automated Production Control Systems
p. 224 abstract
Selection of Metal-Cutting Machines in Operational Design by Means of PLM Systems
p. 233 abstract
Influence of the Positional Error of the Axial Drive Module on the Machining Precision in a Lathe
p. 238 abstract
Abrasive Tools for Hole Machining in Robotic Systems
p. 244 abstract
Software Correction of Volumetric Geometrical Errors of Multi-Axis Systems Based on Laser Interferometric Measurements
p. 248 abstract
Energy Losses in the Electric Motor of a High-Speed Spindle
p. 253 abstract
Influence of Clamping Force on the Machined Surface in Abrasive Finishing
p. 258 abstract
Improved Machining of Heat-Resistant Materials by High-Temperature Embrittlement in Cutting
p. 262 abstract
Precision of Surfaces Machined on a Lathe with Geometric Errors
p. 266 abstract
Technological Inheritance in the Machining of Titanium Alloys
p. 270 abstract
Measuring the Optical Density of Wastewater by Means of a Diamond UV Photodetector
p. 273 abstract
Erratum to: “Manufacture of Metal–Concrete Basic Components for High-Precision Lathes” [Russian Engineering Research 36, 872 (2016)]
p. 276 abstract
Erratum to: “Optimal Materials for the Manufacture of Metal-Cutting Machines” [Russian Engineering Research 36, 846 (2016)]
p. 277 abstract