Contents
Russian Engineering Research


Vol. 32, No. 2, 2012

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.


Size and Acoustic Optimization of Helmholtz Resonators

S. V. Gorin and M. V. Kuklin p. 115  abstract

Rotor Drive in a Balancing Machine

O. O. Polushkin p. 118  abstract

Configuration of Multimotor Electrohydraulic Drives

Yu. A. Medvedev, V. V. Morozov, and V. P. Kuznetsov p. 123  abstract

Irreversible Mechatronic Manipulators

S. O. Nikiforov, B. E. Markhadaev, and B. S. Nikiforov p. 126  abstract

Inertial Rotary Vibrational Drives for Crushers of Brittle Materials

S. V. Sergeev and R. G. Zakirov p. 130  abstract

Determining the Optimal Set of Replaceable Gears in Kinematic Chains

V. O. Fedoseenko p. 135  abstract

Efficiency of Mobile and Immobile Pulley Blocks

N. I. Khabrat p. 138  abstract

Pile Dynamics in Coolant Flux

Yu. N. Drozdov, M. A. Tananov, E. P. Osipova, V. V. Makarov,
A. V. Afanas’ev, and I. V. Matvienko
p. 140  abstract

Locating Accuracy of Shafts in V-blocks

V. E. Karpus and V. A. Ivanov p. 144  abstract

Quantum-Mechanical Simulation of Friction and Lubrication in Cutting

Yu. G. Kabaldin, S. V. Seryi, and A. A. Utkin p. 151  abstract

Composition and Structure of Carbon-Rich Local Sections Formed
on Titanium Alloys in Electrolytes

P. S. Gordienko, I. G. Zhevtun, V. A. Dostovalov, V. G. Kuryavyi, and N. N. Barinov p. 158  abstract

Influence of Highly Coercive Permanent Magnets on the Performance
of a Cylindrical Magnetic Clutch

A. Ya. Krasil’nikov and A. A. Krasil’nikov p. 162  abstract

A New Method of Solving Complex Variational Problems: Formation of the Blank’s Concave
Upper End in Broaching

A. L. Vorontsov p. 167  abstract

Machining of Nonferrous Metals and Alloys by Synthetic Corundum Cutting Plates

A. M. Arzumanyan p. 172  abstract

Influence of the Mechanical Properties of Carbon Steel on the Hardening
of Rod Blanks in Upsetting

V. Ya. Gerasimov and O. A. Gerasimova p. 177  abstract

Dynamic Rotary Balancing in Metal-Cutting Machines

A. G. Kol’tsov and D. S. Rechenko p. 179  abstract

Influence of Wear-Resistant Coatings on Tool Performance

V. M. Kishurov, V. N. Ippolitov, M. V. Kishurov, and M. Yu. Nekrasova p.182  abstract

Wear Resistance of High-Speed Steel Cutting Tools

V. M. Kishurov, V. N. Ippolitov, and M. V. Kishurov p. 186  abstract

Refining the Permissible Parameter Ranges in Formalizing Path Design

Yu. L. Chigirinskii and Yu. N. Polyanchikov p. 189  abstract

Organization of Structural and Technological Elements in Machine Parts to Optimize
the Manufacturing Sequence

I. R. Abdeev p. 192  abstract

Cutter Diagnostics on the Basis of Thermoemf Signals and Cutting-Zone Vibration

V. V. Postnov, B. F. Usmanov, and I. E. Letyagin p. 197  abstract

Multipass Rolling Systems

N. N. Kochura p. 200  abstract

Physical Phenomena in the Polishing of Compressor Blades for Gas-Turbine Engines

V. F. Makarov and E. N. Bychina p. 203  abstract

Influence of the External Conditions and the Lubricant and Coolant Fluid
on Tool–Blank Contact

P. P. Chernikov, S. V. Starovoitov, and B. U. Sharipov p. 207  abstract

Improving the Reliability of Threaded Pipe Joints

M. V. Pesin p.210 abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.