Contents

Russian Engineering Research

---

Vol. 44, No. 1, 2024

---

New Connection Diagrams of Oscillators as a Part of Plasma Ignition Systems for Gas-Turbine Engines

Farit A. Gizatullin and Zul’fiya G. Gabidullina p. 1  abstract

Design Engineering and Calculation of Parameters of a Roll-Type Electric Baromembrane Purifier of Industrial Solutions

S. I. Lazarev, D. N. Konovalov and O. V. Lomakina p. 6  abstract

Quantitative and Qualitative Assessments of the Forces Influence on the Press Equipment Guiding Elements

S. V. Kuznetsov, S. V. Ivanov and E. S. Anosova p. 10  abstract

Structural Model of a Nano Piezoelectric Actuator for Nanotechnology

S. M. Afonin p. 14  abstract

Ensuring the Quality of Taper Pipe Threads Rolled in Pipes with the Control of Kinematic Technological Connections

N. M. Rasulov and U. M. Nadirov p. 20  abstract

Adjustment Range of an Automatic V-Belt Variator

N. P. Balovnev, Yu. I. Brovkina, A. S. Luk’yanov and A. I. Starikov p. 23  abstract

Analysis of the Effect of the Piston Stroke to Diameter Ratio on Operating Processes and Properties of a Reciprocating Compressor

V. E. Shcherba and E. V. Khodoreva p. 28  abstract

Method of Adjusting the Plunger Suspension of a Deep-Well Pump

K. R. Urazakov, V. A. Molchanova, O. U. Telekusov and L. A. Mutalova p. 35  abstract

Assessment of Durability of Steels and Alloys under Dynamic Loading

I. A. Vorob’ev and L. A. Vorob’eva p. 39  abstract

Theoretical and Experimental Studies of Hole Processing by Reamer-Broacher

A. Zh. Kassenov p. 42  abstract

Supercomputer Simulation of the Chip Separation Process during Dimensional Dispersion of Elastoviscoplastic Materials

Yu. S. Sergeev, S. V. Sergeev and M. S. Puzankov p. 46  abstract

Efficiency Assessment of Air Channel Cooling of a Multi-Turn Coil for Magnetic Pulse Processing of Metals

V. N. Samokhvalov, D. G. Chernikov and R. Yu. Yusupov p. 54  abstract

Heat Resistance of Tool Materials

A. M. Adaskin p. 61  abstract

The Effect of Using Ceramic Cutting Tools for Turning Thermoplastic Polymer Materials

O. Yu. Erenkov, D. O. Yavorskiy and S. O. Erenkov p. 70  abstract

Features of the Choice of Knurl Material for Cold Calibration of Cylindrical Mid-Module Gear Wheels

A. A. Cherepakhin and V. P. Lyalyakin p. 74  abstract

Constructing a Three-Dimensional Image of Surface Texture from Profilograms

A. D. Abramov, N. V. Nosov, A. V. Savel’ev and N. M. Bobrovskii p. 78  abstract

Gearbox Design and Improvement for Milling Machines

E. V. Mitin and S. P. Sul’din p. 83  abstract

Reinforcement of High-Strength Aluminum Alloy Structures by Steel Inserts

V. F. Korostelev and M. S. Denisov p. 87  abstract

Adhesion and Cohesion of Polymer Composites

A. A. Khodenkov, A. V. Delkov and O. A. Sukhanova p. 91  abstract

Models of Abrasive Grains in Tools: A Review

A. N. Popov, P. A. Mel’nikov and A. A. Shumetova p. 95  abstract

Identifying the Surface Microrelief after Finishing

P. A. Mel’nikov, A. V. Savel’ev, A. F. Grechnikova and A. I. Khaimovich p. 99  abstract

Digital Surface Model of an Abrasive Tool in the Micron Range

A. N. Popov, P. A. Mel’nikov, I. N. Bobrovskii and A. A. Shumetova p. 104  abstract

Dissipative Properties of Whiskerized Layer in Modified Composites under Different Loads

G. I. Kriven, L. N. Rabinskiy and D. S. Shavelkin p. 108  abstract

Defect Development in Multilayer Composites under Static Loads

A. V. Babaytsev, M. Yu. Kalyagin and L. N. Rabinskiy p. 112  abstract

Heat Fluxes and Surface Temperatures at Components of High-Speed Aircraft in a Dissociating Air Flow

O. V. Tushavina, P. F. Pronina and M. S. Egorova p. 116  abstract

Goal Setting in Developing Innovative Industrial Clusters

R. S. Golov and A. V. Myl’nik p. 120  abstract

Classifying Development Tasks for Innovative Industrial Clusters in Regional Innovation Systems

R. S. Golov and A. V. Myl’nik p. 122  abstract

Artificial Neural Networks in the Digital Transformation of High-Tech Enterprises

R. S. Golov and A. V. Myl’nik p. 125  abstract

Assessing the Effectiveness of Software

V. V. Lastochkina and E. R. Kalimullina p. 127  abstract

Development of High-Tech Enterprises in an Era of Transformation

S. P. Kulikov and S. V. Novikov p. 131  abstract

Analytical Tools to Support Management Decisions

V. A. Zolotova p. 134  abstract

Features of Information Support Systems for Processes of Machine-Building Enterprises

S. M. Bobrovsky and E. Yu. Malysheva p. 139  abstract

Improved FMEA Assessment of the Detection Probability for Failure Modes or Their Causes

D. I. Panyukov, M. V. Nenashev, D. A. Demoretskii and V. N. Kozlovskii p. 142  abstract

Improved FMEA Assessment of the Occurrence Probability for Failure Modes or Their Causes

D. I. Panyukov, M. V. Nenashev, D. A. Demoretskii and V. N. Kozlovskii p. 146  abstract

Organizing FMEA Preparations at Enterprises

D. I. Panyukov, M. V. Nenashev, D. A. Demoretskii and V. N. Kozlovskii p. 150  abstract

Blockchain Systems in the Component Supply Chain for Civil Aircraft and after-Sales Service

P. D. Milovanov and F. A. Nasonov p. 153  abstract

Indeterminacy in Production Planning at Industrial Enterprises

A. A. Burdina, El Said Andrey Fausi and N. A. Borodina p. 158  abstract

Live Knowledge Standardization in Quality and Risk Management

D. I. Panyukov, M. V. Nenashev, D. A. Demoretskii and V. N. Kozlovskii p. 162  abstract

---