Contents
Russian Engineering Research


Vol. 32, No. 1, 2012

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.


Energy Properties of Multimotor Electrohydraulic Drives

Yu. A. Medvedev, V. V. Morozov, and V. P. Kuznetsov p. 1  abstract

Calculating the Reliability of Machine Parts on the Basis of the Chebyshev Inequality

V. S. Utkin p. 5  abstract

Extending the Life of Bolt Joints with Radial Clearance

V. V. Dunaev and A. A. Shirshov p. 9  abstract

Inertial Vibratory Rotor Drives in Machines for Grinding Fibrous Materials

S. V. Sergeev, R. G. Zakirov, and Yu. S. Sergeev p. 13  abstract

Optimizing Hydrodynamic Thrust Bearings of Mitchell Type

V. A. Maksimov, M. B. Khadiev, and R. M. Galiev p. 20  abstract

Wear Dynamics of Fragments in the Lower Part of a Fuel Assembly with Unattached Rods

Yu. N. Drozdov, E. P. Osipova, V. N. Puchkov, V. V. Makarov,
A. V. Afanas’ev, and I. V. Matvienko
p. 29  abstract

Contact Friction in Lead and Lead–Bismuth Coolants

A. V. Beznosov, Yu. N. Drozdov, T. A. Bokova, O. O. Novozhilova,
M. V. Yarmonov, and K. A. Makhov
p. 33  abstract

Wear Resistance of Economically Alloyed High-Strength Iron with Globular Graphite
after Casting in Metallic Molds

R. K. Hasanli p. 39  abstract

Manufacture of Slip Bearings from PTFE-Based Composite

D. A. Negrov and E. N. Eremin p. 42  abstract

Improving the Wear Resistance of High-Strength Cast-Iron Gears by Applying
a Thermodiffusional Vanadium Coating

A. A. Veselovskii p. 45  abstract

Benefits of High-Speed Milling

I. E. Kiryushin, D. E. Kiryushin, T. G. Nasad, and S. B. Venig p. 48  abstract

Surfaces Ground by Standard Wheels and Wheels with Graduated Grain Sizes

S. A. Bagirov p. 50  abstract

Mechanical Production of Tungsten and Molybdenum Nanoparticles for Functional Composites

D. V. Onishchenko p. 55  abstract

Laser Modification of the Properties of Boride Coatings

V. M. Biryukov p. 58  abstract

Influence of Loads on the Stress–Strain State of Aluminum-Oxide Ceramic Cutting Plates

S. N. Grigor’ev, V. V. Kuzin, M. N. Morgan, and A. Batako p. 61  abstract

Experimental Methods of Determining the Cutting Forces at the Tool’s Rear Surface

A. V. Popov and A. V. Dugin p. 68  abstract

A New Method of Solving Complex Variational Problems, for the Example of Broaching

A. L. Vorontsov p.70 abstract

New Fire-Extinguishing Method

A. A. Bekaev, P. I. Strokov, and A. Yu. Koval’chuk p. 75  abstract

Integrated Automated Information System for Manufacturing Enterprises

K. S. Kul’ga p. 78  abstract

Improving Automatically Controlled Machine Tools

R. G. Kudoyarov, V. N. Zharinov, V. L. Zinov, E. M. Durko, and R. R. Basharov p. 85  abstract

Influence of Technological Parameters on the Thermodynamic System of Cutting Equipment

S. P. Nikitin and V. K. Zal’tsberg p. 90  abstract

Ensuring Equipment Precision

A. G. Kol’tsov and V. B. Sukhinin p. 93  abstract

Surface-Layer Formation by Melting Tungsten-Cobalt Powder Mixtures on Steel

V. G. Burov, V. A. Bataev, S. V. Veselov, Z. B. Bataeva, and T. S. Sameishcheva p. 95  abstract

Wear Resistance of Coated High-Speed Steel Cutting Tools

V. M. Kishurov, V. N. Ippolitov, M. V. Kishurov, and M. Yu. Nekrasova p. 98  abstract

Automated Polishing of Sharp Edges on Gas-Turbine Components by Abrasive Polymer Brushes

V. F. Makarov, A. V. Vinogradov, and A. V. Nurtdinov p. 102  abstract

Dynamic Phenomena in Deep Drilling

M. P. Kozochkin, F. S. Sabirov, and A. N. Frolov p. 108  abstract

Frictional Properties of Metallic Surfaces Separated by a Solid Lubricant Film at High Temperature

N. K. Krioni p.111 abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.