Contents

Russian Engineering Research

---

Vol. 43, No. 12, 2023

---

Method for Calculating Deformations and Stresses in an Impact Press Fuse

B. A. Gordeev, V. I. Erofeev, A. I. Ermolaev, S. N. Okhulkov and A. S. Plekhov p. 1481  abstract

Development of a Design and a Method for Calculating the Volume and Mass of the Structural Material of a Tubular Electrobaromembrane Apparatus for Cleaning Industrial Solutions of Machine-Building and Chemical Industries

S. I. Lazarev, D. N. Konovalov, P. A. Galkin and P. M. Malin p. 1489  abstract

Vibration Damping of Ship Propeller Blades

A. A. Pshenitsyn, A. N. Lesnyak and V. S. Samokhin p. 1494  abstract

Double-Sided Deep Grinding of Gas Turbine Engine Blades with Highly Porous CBN Tools

D. I. Volkov and B. V. Tsvetkov p. 1499  abstract

Motion Control of Mechanical Systems under Force-Torque Uncertainty of the Medium Based on the Principle of Archimedes’ Lever

M. Kh. Magomedov and A. V. Yakovlev p. 1504  abstract

Influence of Metal Structure on the Fatigue Strength of Additively Manufactured Products

Yu. G. Kabaldin, A. A. Khlybov, M. S. Anosov and D. A. Shatagin p. 1512  abstract

Refinement of Vehicle Transmission Gear Ratios

I. F. Dyakov and Yu. V. Moiseev p. 1518  abstract

Experimental Study of Micro-Hydropower Plants. Calculation of Water Wheel Efficiency

G. U. Makhkamov and U. A. Khakimov p. 1524  abstract

Improving a System for Heat Treatment of Borehole Sucker Rods

E. A. Aliyev and I. A. Habibov p. 1528  abstract

Mechanical Properties of Structural Steel after Diamond Burnishing

G. Hamzayeva p. 1531  abstract

Distribution of Shear Stresses and Actual Contact Area along the Length of Interference Joints as a Factor of Their Tightness

N. E. Kurnosov and Yu. Yu. Nakashidze p. 1535  abstract

Metallographic Appraisal of Alloys for Components of Tractors and Roadbuilding Machines

V. A. Zhulai, E. A. Tarasov, R. A. Sheps and E. V. Tarasova p. 1540  abstract

Stamping of Nonuniform Channels: 8. Strain State and Hardening of the Workpiece in Constrained Extrusion. 8.3. Plastic Zone under the Punch Close to the Thick Wall with Hindered Flow

A. L. Vorontsov p. 1543  abstract

Study of Deformation Processes and Features of Chip Formation during Rotary Turning with Multifaceted Cutters

A. S. Binchurov, Yu. I. Gordeev, V. B. Jasinski, A. K. Dvoryanskii, V. V. Gazenbush and A. P. Gribanov p. 1547  abstract

Method of Determining Optimum Sharpening Angles for the Teeth of a Metal-Cutting Tool

A. A. Bekaev, P. I. Strokov, I. B. Degtyareva and O. V. Filippova p. 1555  abstract

Quality Assurance of the Surface Layer of Plain Bearing Parts Based on Planetary Rotary Turning

E. A. Petrovsky and K. A. Bashmur p. 1559  abstract

Ensuring the Functional Performance of the Cylinder Liner at the Finishing Processing Stage

N. K. Sanaev and K. D. Makhmudov p. 1563  abstract

Accurate Machining of Complex Contours on CNC Metal-Cutting Machines

Yu. G. Sledkov, L. L. Khoroshko, P. M. Kuznetsov and N. A. Belousov p. 1567  abstract

Basic Kinematic and Mechanical Parameters in the Finishing of Hard Alloys

K. R. Muratov, T. R. Ablyaz, A. A. D’yakonov and E. A. Gashev p. 1571  abstract

Improving Machining Quality in a Robot System by Minimizing the Elasticity of the Servo Drives

V. L. Afonin, V. V. Sleptsov, A. E. Ablaeva, O. V. Moskalenko, S. A. Kanaev and M. Yu. Molozina p. 1574  abstract

Ceramic Slip Bearing with Simultaneous Rotation of Inner and Outer Races

O. B. Sil’chenko p. 1579  abstract

Structural Properties of Deployable Booms for Communications Satellites

A. A. Khodenkov, A. V. Delkov and O. A. Sukhanova p. 1583  abstract

Digital Technology in the Design of Spacecraft Components

A. A. Khodenkov, A. V. Delkov, O. A. Sukhanova and E. V. Khodenkova p. 1586  abstract

Electrical Discharge Machining of Functional Materials: Influence of Flushing the Electrode Gap on the Productivity and Accuracy

T. R. Ablyaz, E. S. Shlykov, K. R. Muratov, V. V. Karmanov and S. S. Siddhu p. 1591  abstract

Wire Arc Additive Manufacturing: Influence of Production Parameters on Layer Geometry

A. A. Shnezko, O. R. Luzanov, V. I. Kirillov, A. A. Fadeev, L. A. Martynova and O. V. Shcherbina p. 1594  abstract

Impedance Spectroscopy of Materials Used in Radio Components

E. R. Zhdanov, A. M. Antonova and A. A. Epsilov p. 1597  abstract

Automation of Production Processes: Problems and Solutions

M. V. Maksimova, N. S. Efimova, N. A. Kucheva and E. V. Surkova p. 1602  abstract

Inverse Modeling of Business Processes in Manufacturing

L. L. Khoroshko, P. M. Kuznetsov and A. L. Khoroshko p. 1606  abstract

Legal Aspects of Financial Leasing Management

G. V. Tikhonov p. 1609  abstract

Cost Management at Airlines

E. N. Ermolaeva and A. G. Boldycheva p. 1613  abstract

Efficient Use of Technology Parks

A. S. Koval’chuk p. 1617  abstract

Paradigm of the Modern Market in the Strategic Management Process

G. V. Tikhonov and A. D. Solodova p. 1622  abstract

Adaptive Management of Small and Medium-Sized Enterprises as Anti-Crisis Management against Dynamics of External Factors

G. V. Tikhonov, M. B. Pushkareva and L. A. Lavrova p. 1626  abstract

Profit Management at Enterprises

A. G. Boldycheva and M. M. Starkova p. 1632  abstract

---