Vol. 40, No. 12, 2020

Russian Engineering Research

Optimal Design of Hydrostatic Spindle Bearings with Passive Throttle Control of Fluid Injection

S. N. Shatokhin, A. S. Kurzakov and M. V. Brungardt p. 973 abstract

Structuring in Metastable Melt

V. I. Semenov and A. Yu. Chirkov p. 978 abstract

Determination of the Helical-Gear Geometry Taking Account of Total Teeth Wear

A. G. Popovich p. 981 abstract

Using the Properties of a One-Sheet Hyperboloid in Bearings with Cylindrical Rollers

V. N. Khloponin p. 988 abstract

Currents in the Bus Assembly of a High-Current System for an Electrofurnace

T. A. Novozhilov, A. N. Novozhilov and D. M. Rakhimberdinova p. 995 abstract

Kinematic Accuracy of Relative Manipulation by a Two-Handed Robot

E. I. Vorob’ev and D. I. Khatuntsev p. 1000 abstract

Amplitude–Frequency Characteristics of Magnetically Controlled Hydraulic Bearings with Added Mass

A. V. Vanyagin, B. A. Gordeev, S. N. Okhulkov, D. Yu. Titov and A. S. Plekhov p. 1003 abstract

Chromium Carbides in Abrasion-Resistant Coatings

N. V. Kobernik, A. S. Pankratov, R. S. Mikheev, A. G. Orlik, S. P. Sorokin, V. V. Petrova and D. V. Stroitelev p. 1013 abstract

Determining the Minimum Number of Technological Bases in Machining

B. M. Bazrov and T. M. Gainutdinov p. 1017 abstract

Stable Milling

D. Yu. Topolov p. 1020 abstract

Approach to Solving the Task of Backup on Machine Tools with CNC

G. M. Martinov, N. V. Kozak and P. A. Nikishechkin p. 1024 abstract

Cost Management over the Aircraft Life Cycle

M. M. Gyazova, M. V. Siluyanova, D. A. Bondarenko and K. V. Tokarev p. 1030 abstract

Smart Information System for Generating Design Constraints in the Auto Industry

L. A. Simonova, D. N. Dem’yanov and A. A. Kapitonov p. 1034 abstract

Predicting the Erosion Resistance of an Anode in Electrospark Surfacing

S. A. Velichko, A. V. Martynov, I. S. Kuznetov and I. H. Hassan p. 1039 abstract

Improving the Thermal Stability of Hot-Working Dies

L. G. Petrova, V. A. Aleksandrov, P. E. Demin and S. I. Barabanov p. 1042 abstract

Mathematical Design of Industrial Processes

S. Yu. Kalyakulin, V. V. Kuz’min, P. M. Kuznetsov, E. V. Mitin and S. P. Sul’din p. 1045 abstract

Influence of Engine Parameters on the Power-Unit Performance in Supersonic Aircraft

M. V. Siluyanova, V. V. Kuritsyna, A. D. Alendar’ and A. N. Grunin p. 1048 abstract

Diagnostics of Internal-Grinding Cycles at the Design Stage

A. V. Akintseva, A. V. Prokhorov, S. V. Omel’chenko and E. N. Simonov p. 1052 abstract

Safety of Machining Processes

L. E. Shvartsburg, N. A. Ivanova, S. A. Ryabov, E. V. Butrimova, S. I. Gvozdkova, O. V. Yagol’nitser, D. I. Kulizade and V. A. Grechishnikov p. 1055 abstract

Decreasing the Periodic Errors in Machining

V. A. Prilutskii p. 1058 abstract

Stamping of Eyelets in Brackets by Plastic Deformation

E. V. Mitin, S. P. Sul’din and A. E. Mitina p. 1065 abstract

Surface Hardening of Frictional Pairs in the Hydropneumatic Units of Gas-Turbine Engines

D. S. Moeni Tabatabai, A. G. Boitsov, V. V. Kuritsyna, M. V. Siluyanova and S. A. Kazantsev p. 1069 abstract

XML-Based Network Integration of Information in CAD Systems

A. V. Shchekin and I. N. Tribushinin p. 1073 abstract

Stress–Strain State of Hydraulic Drives

P. A. Ionov, A. V. Stolyarov and A. M. Zemskov p. 1078 abstract

Optimizing the Idling Path of Large Metal-Cutting Machines

P. M. Kuznetsov and A. G. Yagopol’skii p. 1081 abstract

Intermittent-Motion Planetary Mechanism with Elliptical Gears

A. A. Prikhod’ko p. 1084 abstract

Gear Cutting in a Globoid Pair with an Initial Cylindrical Involute Gear

L. S. Mal’ko, A. V. Sutyagin, I. V. Trifanov, N. V. Zakharova and O. A. Sukhanova p. 1087 abstract

Vortex Head for Thread Cutting

E. V. Mitin, S. P. Sul’din and S. Yu. Kalyakulin p. 1091 abstract

Blunting of the Cutting Edges of Hard-Alloy Mills and PVD Coating Application

A. A. Koryazhkin and D. S. Vorob’ev p. 1094 abstract

Machining by Means of Implicit Bases

B. M. Bazrov and N. A. Rodionova p. 1097 abstract

Influence of Mandrel Expansion on the Quality of Round Waveguide Pipe

V. I. Trifanov, O. A. Sukhanova, L. S. Mal’ko, A. V. Sutyagin and I. V. Trifanov p. 1100 abstract

Improving the Precision of Monowheel Manufacture

D. I. Volkov and S. M. Kozhina p. 1103 abstract

Management of Short-Run Production

L. L. Khoroshko and P. M. Kuznetsov p. 1107 abstract

Management of High-Tech Enterprises on the Basis of Innovative Digital Technologies

S. V. Novikov and P. D. Milovanov p. 1109 abstract

Updating Production Processes at High-Tech Enterprises

S. V. Novikov p. 1112 abstract

Modernization of High-Tech Products with Strategic-Risk Assessment

A. A. Burdina, N. V. Moskvicheva and S. S. Burdin p. 1115 abstract

State Regulation of Investment and the Development of High-Tech Enterprises

V. V. Lastochkina and N. V. Savilova p. 1118 abstract

Radial Basis Function Networks as a Core of Individual Adapted Pilot Control Action Model

V. I. Glushankova, R. V. Kim and V. A. Yakimenko p. 1121 abstract

Predicting the Earth Orientation Parameters by the Least Squares Method

D. A. Kozorez, D. M. Kruzhkov, K. V. Kuznetsov and E. A. Martynov p. 1124 abstract

The Earth Orientation Parameters Inaccuracy and Spacecraft Motion Prediction Errors. 1. LAGEOS-1

D. A. Kozorez, M. N. Krasil’shchikov and D. M. Kruzhkov p. 1128 abstract

The Earth Orientation Parameters Inaccuracy and Spacecraft Motion Prediction Errors. 2. GPS Satellites

D. A. Kozorez, M. N. Krasil’shchikov and D. M. Kruzhkov p. 1132 abstract

Heat Stores with a Melting Working Medium for Spacecraft Thermal Control Systems: Simulation

A. E. Belyavskii p. 1135 abstract

Heat Stores for Thermal Stabilization of Electronic Equipment in Spacecraft

A. E. Sorokin p. 1138 abstract

Heating of Components in the International Space Station

N. O. Borshchev, A. E. Belyavskii and A. E. Sorokin p. 1141 abstract

Improved Environmental Monitoring for Road Transportation

E. V. Sotnikova, A. E. Sorokin, S. N. Bulychev and N. Yu. Kalpina p. 1144 abstract

Contents

Russian Engineering Research