Contents

Russian Engineering Research

---

Vol. 38, No. 12, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

---

Elastic and Damping Properties of a Magnetorheological Coupling for Rotating Shafts

B. A. Gordeev, S. N. Okhulkov, A. N. Osmekhin and G. K. Korendyasev p. 911  abstract

Mill Eigenfrequency in Thermal Fitting

M. M. Ermolaev, S. K. Rudnev and P. A. Bykov p. 916  abstract

Roughness of Cylindrical Parts in Transverse Burnishing by Flat Plates

S. A. Zaides and Fam Dak Fong p. 921  abstract

Improving Pipeline Manufacture

M. Ya. Brovman p. 926  abstract

Machining Forces Exerted by an Elastic Abrasive Wheel

Yu. V. Dimov and D. B. Podashev p. 932  abstract

Electromagnetoelastic Nano- and Microactuators for Mechatronic Systems

S. M. Afonin p. 938  abstract

Benefits and Applications of High-Strength Titanium Alloys

S. V. Putyrskii, A. L. Yakovlev and N. A. Nochovnaya p. 945  abstract

Cycloidal Shaping of Polyhedra in Two-Rotor Systems

D. V. Ivanov, V. S. Ivanov and A. P. Kuznetsov p. 949  abstract

Wear of Machine Parts with Mixed Lubrication

I. A. Medelyaev p. 956  abstract

Torque on a Shaft Connected to the Driveshaft by a Magnetorheological Coupling

B. A. Gordeev, S. N. Okhulkov, A. S. Plekhov and A. E. Shokhin p. 962  abstract

Hardened Novikov Gears as the Last Stage of General-Purpose Gear Systems

V. I. Korotkin p. 968  abstract

Electronic Document Management in Production Systems

A. N. Feofanov, M. A. Shutikov and K. S. Ponomarev p. 974  abstract

Tribological Properties of Materials Used in Multidisk Airplane Braking Mechanisms

A. K. Golubkov, A. V. Morozov and A. G. Shpenev p. 979  abstract

Magnetically Ordered Electrolytic Coatings in Hydraulic Systems

E. A. Pamfilov, P. G. Pyrikov, G. A. Pilyushina and V. A. Danilyuk p. 983  abstract

Electrophoretic Deposition of Metal Nanoclusters at the Surface of Porous Materials

V. V. Sleptsov, A. V. Savkin, D. Yu. Kukushkin and A. O. Diteleva p. 989  abstract

Influence of Aluminum Coatings on the Quality of Weld Joints

A. P. Sychev and M. A. Sycheva p. 992  abstract

Corrosion of Molds in Injection Molding Machines

S. A. Sorokina and A. D. Romanov p. 996  abstract

Strengthening of PMS-1 Copper Powder by High-Frequency Induction-Discharge Plasma

V. A. Surkov p. 1000  abstract

Improving Cutter Performance in Turning Complex Profiles

E. A. Kudryashov, I. M. Smirnov, Yu. S. Stepanov and N. A. Khizhnyak p. 1003  abstract

Temperature Rise in the Cutting Zone during the High-Speed Milling of Heat-Resistant Alloys

A. Yu. Albagachiev, E. V. Preobrazhenskaya, A. S. Krasko and E. S. Stramtsova p. 1009  abstract

Selection of Surfaces for Endurance Tests of Ball End Mills

E. A. Ryabov, R. M. Khisamutdinov, V. A. Grechishnikov, S. Yu. Yurasov and O. I. Yurasova p. 1012  abstract

Ball End Mill with Curved Cutting Edge and Constant Cutting Geometry

E. A. Ryabov, R. M. Khisamutdinov, V. A. Grechishnikov, S. Yu. Yurasov and O. I. Yurasova p. 1015  abstract

Improved Precision of Trapezoidal Thread

V. A. Grechishnikov, Yu. E. Petukhov, V. B. Romanov, A. V. Isaev, P. V. Domnin and P. M. Pivkin p. 1018  abstract

Control of the Machining Precision in Thread Cutting

M. Z. Khostikoev, V. A. Timiryazev and E. M. Orlov p. 1022  abstract

Applicability of Tractional Electric Motors

G. A. Pautov, V. A. Grechishnikov, O. I. Yurasova, S. Yu. Yurasov and E. M. Medvedeva p. 1026  abstract

Friction Stir Welding in the Aerospace Industry

A. G. Boitsov, D. N. Kuritsyn, M. V. Siluyanova and V. V. Kuritsyna p. 1029  abstract

Selection of the Cutting Conditions on the Basis of Dynamic Stability for an Automated Lathe

A. A. Ignat’ev, M. V. Vinogradov, S. A. Ignat’ev, E. M. Samoilova, T. G. Nasad, A. A. Kazinskii, V. A. Karakozova, N. A. Kazinskii, M. Yu. Zakharchenko and V. A. Dobryakov p. 1034  abstract

Laser Machining of Tool Steels

V. V. Zvezdin, R. M. Khisamutdinov, V. A. Grechishnikov, R. R. Saubanov, I. Kh. Israfilov, S. M. Portnov and S. Yu. Yurasov p. 1038  abstract

Thermal Properties of Carbon Plastics

L. N. Shafigullin, N. V. Romanova, V. B. Romanov, S. Yu. Yurasov, D. R. Sarimov and Yu. A. Sokolova p. 1042  abstract

Producing Polydicyclopentadiene from Lower-Grade Dicyclopentadiene

I. F. Gumerov, S. Yu. Yurasov, L. N. Shafigullin, V. B. Romanov, N. V. Romanova, G. R. Shafigullina and Yu. A. Sokolova p. 1046  abstract

Informational Relational Models for Calculating the Cutting Conditions in Automatic Control Systems

S. Yu. Kalyakulin, V. V. Kuz’min, E. V. Mitin and S. P. Sul’din p. 1049  abstract

Improvements in Turbine-Blade Manufacture

V. A. Poletaev and E. V. Tsvetkov p. 1053  abstract

Controlling the State of Machine Tools

A. K. Tugengol’d, V. P. Dimitrov, L. V. Borisova, R. N. Voloshin and M. Yu. Solomykin p. 1056  abstract

More Uniform Motion of Positional Servo Drive in a Jig-Boring Machine

V. E. Lysov and Ya. I. Peshev p. 1063  abstract

Surface Quality of AMg2 Aluminum Alloy with Ultrafine Grain Structure after Machining. 1. Turning

A. V. Filippov, S. Yu. Tarasov, N. N. Shamarin, O. A. Podgornykh and E. O. Filippova p. 1067  abstract

Resultant Cutting Trajectories on Machine Tools with Raster Tool Motion

K. R. Muratov, E. A. Gashev, T. R. Ablyaz, L. D. Sirotenko, E. V. Matygullina and D. M. Lagunov p. 1071  abstract

Quasi-Determinate Model of Thermal Phenomena in Drilling Laminates

S. V. Vantsov, F. V. Vasil’ev, A. M. Medvedev and O. V. Khomutskaya p. 1074  abstract

Control of Surface Quality in High-Speed Machining

T. G. Nasad, A. N. Vasin, A. A. Kazinskii, A. A. Ignat’ev, B. M. Iznairov, G. A. Kozlov, D. A. Tikhonov, E. M. Samoilova, O. P. Reshetnikova, Yu. O. Glushkova, O. Yu. Davidenko and V. A. Melent’ev p. 1077  abstract

Surface Hardening in Hydraulic Cylinders for Airplane Engines

L. V. Denisov, A. G. Boitsov and M. V. Siluyanova p. 1080  abstract

---