Contents

Russian Engineering Research

Vol. 44, No. 11, 2024

Experimental Sample of Digital Indicator for Assessing the Technical Condition of Hydraulic Control System of High-Power Tractor Gearbox

M. N. Kostomakhin, Yu. V. Kataev, A. S. Sayapin, E. V. Pestryakov, and N. A. Petrishchev p. 1511  abstract

New Woodworking System with Automatic Maintenance of Saw Blade Tension

M. A. Blokhin, I. I. Dymchakov, A. P. Shein, and D. D. Yemel’yanov p. 1518  abstract

Justification of the Design and Technological Parameters of the Rack of the Deep Ripper Working Body of Soil-Cultivating Machines

N. S. Bibutov, A. S. Abrorov, I. V. Kovalev, I. N. Kravchenko, and D. A. Pupkova p. 1522  abstract

Influence of Semiactive Control on the Energy Characteristics of Actively Lubricated Radial Bearings

D. V. Shutin, S. V. Mayorov, and Yu. N. Kazakov p. 1531  abstract

Determining the Tractional Resistance of a Seed Drill by Similarity Theory

V. M. Turdaliyev, A. A. Kosimov, and I. I. Sheraliev p. 1537  abstract

Inverse Kinematics of a Kinematically Redundant Hybrid Parallel Mechanism

M. N. Zakharov, P. A. Laryushkin, and A. V. Semenov p. 1542  abstract

Virtual Assembly of Engine Fans to Ensure Dynamic Stability

S. M. Beloborodov, and V. Ya. Modorskiy p. 1547  abstract

Wear of Abrasive Grains

N. V. Baidakova, and S. A. Kryukov p. 1550  abstract

Improving the Wear Resistance of High-Precision Dies

D. M. Berdiev, A. A. Yusupov, M. A. Umarova, and G. M. Kamilova p. 1553  abstract

Wear of Materials with Different Coatings in Loose Abrasive: Laboratory Tests

A. M. Mikhal’chenkov, A. A. Gutsan, A. I. Kupreenko, and S. A. Fes’kov p. 1556  abstract

Influence of Plasma Hardening Parameters on the Final Track Dimensions

N. G. Bayboboev, and Sh. A. Toshtillayev p. 1560  abstract

Diagnosing Cutting Capability of Abrasive Tools Using Acoustic Emission Control

A. P. Mitrofanov, I. A. Rastegaev, and K. O. Zhitnikov p. 1564  abstract

Waterjet Cutting of HARDOX-500 Workpiece

S. Simon, N. D. Yusubov, S. F. Amirli, and F. G. Amirov p. 1572  abstract

Robotic Simulators for Simulation Modeling of Extreme Working Conditions for Personnel

S. O. Nikiforov, and B. E. Markhadaev p. 1577  abstract

Side Frame Strength of a Railroad Truck under a Load

E. V. Mitin, and S. P. Sul’din p. 1584  abstract

Using Deterministic Models and Neural Networks in Digital Twins of Metal Cutting Processes

V. P. Lapshin, I. A. Turkin, V. E. Gvindzhilia, I. O. Dudinov, and D. O. Gamaleev p. 1588  abstract

Design of Radio-Transparent Aircraft Fairings Using an Optimized Apparatus for Strength Calculations

E. R. Zhdanov, A. V. Volkov, A. V. Kryukov, and O. S. Kharina p. 1593  abstract

Influence of Tool’s Thermal Conductivity on Milling with Ultrasound

A. N. Unyanin, and I. Z. Dimukhametov p. 1598  abstract

Study of the Stress–Strain State of Parts of Variable Stiffness during Belt Grinding Operations

A. N. Bolotein, D. I. Volkov, A. V. Kurochkin, A. N. Sutyagin, and A. N. Rykunov p. 1602  abstract

Development of Modified Short-Run Target Control Charts and Determination of Capability Indices for Analysis of Controllability of Small Batch Production Processes

V. P. Alekseev, A. I. Khaimovich, V. G. Smelov, and V. V. Kokareva p. 1608  abstract

Grinding of Helical Surfaces on End Mills: Monitoring by Means of Optimal Tolerances

P. M. Pivkin, V. A. Grechishnikov, Yu. E. Petukhov, V. A. Kuznetsov, A. A. Ershov, E. S. Nazarenko, A. M. Yazev, A. R. Mirazrakhmudov, N. A. Korobov, A. B. Nadykto, D. Wang, R. Yao, and X. Zhang p. 1613  abstract

Features of the Formation of the Structure and Properties of Magnesium Alloys during Additive Plasma Surfacing with Large-Diameter Wire

S. G. Nikulina, I. P. Ovchinnikov, Yu. D. Shchitsyn, T. V. Ol’shanskaya, D. S. Belinin, and S. D. Neulybin p. 1617  abstract

Testing a Statistical Quality Control Method Based on Short-Run Control Charts for Small Batch Production on the Example of Selective Laser Sintering of Blanks of Gas Turbine Engine Blades

V. P. Alekseev, A. I. Khaimovich, V. G. Smelov, and V. V. Kokareva p. 1623  abstract

Pressing of Hybrid Composites in Drone Manufacture

V. I. Reznichenko, and M. Yu. Kalyagin p. 1629  abstract

Influence of Lateral Coolant Flow on the Thermal Characteristics of a Finned Plate Heat Exchanger

A. V. Vikulin, and V. A. Zemlyanaya p. 1634  abstract

Comprehensive Kinematic Analysis for Optimal Performance of a 6-DOF Robotic Manipulator with Prismatic Joint (RRRRRP)

M. Y. Alwardat, H. M. Alwan, and O. V. Kochneva p. 1640  abstract

Functional and Process Modeling of the Risk Management Procedure

D. I. Panyukov, M. V. Nenashev, D. A. Demoretskii, and V. N. Kozlovskii p. 1648  abstract

Modeling of the Stage of Development and Implementation of Corrective Actions within the Risk Management Procedure

D. I. Panyukov, M. V. Nenashev, D. A. Demoretskii, and V. N. Kozlovskii p. 1655  abstract

Modeling of the Stage of Planning and Preparation of the Risk Management Procedure

D. I. Panyukov, M. V. Nenashev, D. A. Demoretskii, and V. N. Kozlovskii p. 1660  abstract

Influence of Voltage Change on a Car’s Power Distribution System

U. V. Brachunova, D. A. Demoretskii, V. N. Kozlovskii, and D. I. Panyukov p. 1665  abstract

Influence of Voltage Change on the Operation of a Car’s Lighting and Electronic Components

U. V. Brachunova, D. A. Demoretskii, V. N. Kozlovskii, and D. I. Panyukov p. 1668  abstract

Influence of Voltage Change on the Operation of Vehicle Ignition Systems

U. V. Brachunova, M. V. Nenashev, V. N. Kozlovskii, and D. I. Panyukov p. 1672  abstract

Designing Radiation-Resistant Application-Specific Integrated Circuits in a Digital Information Transmission System

A. O. Slavyanskii, V. A. Bezkaravainyi, A. E. Latyshev, P. N. Mironov, A. V. Shpak, E. R. Zhdanov, and I. V. Shatskaya p. 1675  abstract

Basic Topological Design Provisions of a Methodological Toolkit for Assessing the Effectiveness of Intellectual Property Commercialization

S. V. Novikov p. 1680  abstract

Economic Assessment of Informatization of High-Tech Companies

A. A. Kambarov, and A. M. Kambarov p. 1683  abstract

Advantages and Disadvantages of Using Artificial Intelligence in Higher Education

N. V. Arsen’eva, L. M. Putyatina, N. V. Tarasova, and G. V. Tikhonov p. 1687  abstract

Assessing the Ground Structure in Drilling by Analysis of the Phase Shift in the Probing Electrical Signal

A. A. Bykov, D. I. Surzhik, and O. R. Kuzichkin p. 1691  abstract