Contents

Russian Engineering Research

---

Vol. 42, No. 11, 2022

---

Electrochemical Membrane System of Roller Type for the Separation of Industrial Solutions

S. V. Kovalev and O. A. Kovaleva p. 1103  abstract

Motion of a Robot Mower with Directional Control

M. I. Belov, D. V. Anashin, N. E. Kabdin, V. F. Storchevoy and Yu. A. Sudnik p. 1110  abstract

Determining the Parameters of Wave Spring Washers

A. S. Ivanov and E. S. Novikov p. 1117  abstract

Hardening of Rods by High-Frequency Current

E. A. Aliev and I. A. Habibov p. 1120  abstract

Stress–Strain State of Components Hardened by Plastic Deformation under Cyclic Loading

S. A. Zaydes and Minh Quan Ho p. 1125  abstract

Fuel-Supply Mechanism in the ZOTA Maxima 150 Solid-Fuel Boiler

V. I. Kuleshov, A. A. Krakovetskiy, V. M. Dolgov and O. V. Kuleshova p. 1133  abstract

Stamping of Nonuniform Channels. 6. Fibrous Structure in Channel Extrusion. 6.1. Basic Principles

A. L. Vorontsov p. 1137  abstract

Production of Ultrafine Granules from High-Strength Aluminum Alloys

M. V. Zharov p. 1143  abstract

Resolution of Stress into Components for Strength Assessments of Permanent Joints

T. S. Latun, Yu. A. Tsumarev, V. K. Sheleg, S. M. Bobritskiy and M. V. Latun p. 1149  abstract

Mobile Unit for Coating Application on Outdoor Safety Barriers

N. A. Fomenko, O. V. Burlachenko, V. G. Polyakov, S. A. Chebanova and Yu. V. Guschina p. 1154  abstract

Modification of Working Fluids with Fine Carbon Particles in Metal Cutting

N. K. Tolochko, K. L. Sergeev and I. M. Petrutik p. 1158  abstract

Failure of Metals Produced by Additive Arc Surfacing: Neural Network Analysis

Yu. G. Kabaldin, M. S. Anosov, D. A. Shatagin, M. V. Zhelonkin, P. V. Kolchin and D. A. Ryabov p. 1164  abstract

Influence of Rotary-Cutting Parameters on the Surface Quality of High-Precision Flexible Thin-Walled Parts

A. M. Gafarov, Kh. V. Gafarzade, I. A. Khankishiev and F. M. Kalbiev p. 1170  abstract

Assessing the Working-Cycle Fluctuation in Internal-Combustion Engines from the Nonuniformity of the Idling Speed

P. V. Safronov, M. G. Shatrov and L. N. Golubkov p. 1174  abstract

3D Modeling in the Design and Researches of Internal Combustion Engines

A. L. Yakovenko, M. G. Shatrov, L. N. Golubkov, E. A. Savastenko and Yu. V. Trofimenko p. 1178  abstract

Optimal Synthesis of Hydrodynamic Torque Converters for Special-Purpose Vehicles

G. S. Mazlumyan, A. Yu. Domogarov, S. A. Eruslankin, I. M. Makeev and I. O. Sudarikov p. 1182  abstract

Tool Selection in Machining the Edges of Carbon Fiber Parts

I. S. Bolotnikov, E. A. Kosenko, N. I. Baurova and V. A. Zorin p. 1185  abstract

Restoration of Machinery by Means of Nonwoven Polymer Composites

Yu. V. Trofimenko and A. G. Timofeeva p. 1189  abstract

Hybrid Technology for Surface Hardening of Structural Steel

O. V. Chudina, V. M. Prikhod’ko, D. S. Simonov and P. Bringulis p. 1192  abstract

Optimizing the Parameters of Ultrasonic Surface Plastic Deformation by a Free Steel Indenter

R. I. Nigmetzyanov, V. M. Prikhod’ko, S. K. Sundukov, A. V. Sukhov and D. S. Fatyukhin p. 1195  abstract

Integration of Scalable IT Architectures on the Basis of Data Fabric Technology

N. G. Kuftinova, A. V. Ostroukh, N. A. Filippova, V. V. Gaevskii and A. V. Podgorny p. 1199  abstract

Digital Transformation of Enterprises Using a Low-Code Platform

A. V. Ostroukh, N. G. Kuftinova, V. V. Gaevskii, N. A. Filippova and E. V. Subachev p. 1203  abstract

Model of Traffic Flow with Different Types of Vehicles on Multilane Highway Section Ahead of Exit

M. V. Yashina, A. G. Tatashev, A. S. Dotkulova and D. A. Afanas’eva p. 1207  abstract

Surfactant-Based Modifier for Motor Oil

S. M. Gaidar, M. Yu. Karelina and N. V. Atamanenko p. 1211  abstract

Influence of Modifier Concentration on Molecular-Film Quality

M. Yu. Karelina, V. S. Ershov, A. A. Akulov and A. V. Podgorny p. 1213  abstract

Erratum

Erratum to: Hardenability of Silicon Nitride Cutting Ceramic and the Influence of Alloying Elements

V. N. Puchkin, I. D. Storozhenko, E. S. Geitsenreder, L. P. Salantii, A. V. Kovalevskaya, V. E. Burlakova and I. A. Turkin p. 1216  abstract

---