Vol. 38, No. 11, 2018
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.
Production Unit for Fusible Metal Powders
p. 825 abstract
Actual Contact Area in Pressure Couplings between Components of Different Hardness
p. 830 abstract
SQP Optimization of a Planar Parallel Mechanism: Maximization of Effective Working Zone
p. 834 abstract
Airflow Bypass in Centrifugal Compressor and Operational Stability
p. 840 abstract
Introducing Physical Nonlinearity in the Design of Aluminum-Alloy Vehicle Components
p. 844 abstract
Effect of Plasma from a High-Frequency Low-Pressure Induction Discharge on the Corrosion Resistance of a Composite Based on Iron Powder
p. 846 abstract
Influence of the Lattice Parameter on the Low-Temperature Brittle Failure of Metals
p. 848 abstract
Calculation and Experimental Methodic for Ensuring the Accuracy of the Reinforcement Angle of the Preform Made by Radial Braiding
p. 855 abstract
Influence of Oscillatory Smoothing on the Residual Stress in Cylindrical Components
p. 859 abstract
Gun-Drill Insertion in Drilling Deep Holes by Means of Multifunctional Machine Tools
p. 865 abstract
Compatibility of Components in Complex Systems
p. 872 abstract
Dynamic Characteristics of an Active Vibrocontact Monitoring System for Multipurpose Machine Tools
p. 876 abstract
Chip Formation in Turning by Cutting Inserts with Balls at the Front Surface
p. 879 abstract
Mechatronic Chip-Disintegration System for Lathes
p. 882 abstract
Formalization of Automated Base Selection in the Design of Machining Processes
p. 886 abstract
Surface Quality after High-Speed Grinding
p. 889 abstract
Influence of Insert Configuration on the Product’s Surface Quality in Burnishing
p. 892 abstract
Measuring System for Use in Radar-System Development
p. 896 abstract
Influence of Diffusional Surface Alloying on the Hardened-Layer Thickness for Gray-Iron Machine Parts
p. 901 abstract
Servicing and Repair of High-Performance Equipment
p. 904 abstract