Contents
Russian Engineering Research

Vol. 31, No. 11, 2011

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Suppressing Acoustic Vibrations within Liquid Rocket Motors by Means of Antipulsation Barriers

S. V. Mosolov and V. I. Biryukov p. 1039  abstract

Static Properties of Multimotor Electrohydraulic Drives

V. V. Morozov, Yu. A. Medvedev, and V. P. Kuznetsov^† p. 1045  abstract

Reducing the Vibration of a Chevron Gear Transmission

O. I. Kosarev, I. A. Bednyi, and M. G. Mamonova p. 1052  abstract

Assessing the Contact Pliability of Gear Couplings

F. G. Nakhatakyan, I. A. Bednyi, and A. K. Puzakina p. 1057  abstract

Automated Thermal-Strength Calculations of Ceramic Cutting Plates

S. N. Grigor’ev, V. I. Myachenkov, and V. V. Kuzin p. 1060  abstract

Formalized Definition of Part Positions in Machining

S. A. Shcherbakov and M. P. Kul’geiko p. 1067  abstract

Friction and Wear of Fuel Assemblies in Water-Moderated Reactors

Yu. N. Drozdov, V. V. Makarov, A. V. Afanas’ev, I. V. Matvienko, and V. N. Puchkov p. 1072  abstract

Influence of Wear on the Operational Stability of Ball Bearings

A. V. Orlov p. 1078  abstract

Modular Design of Machine Tools

B. M. Bazrov p. 1084  abstract

Alloying Titanium Alloys with Rare-Earth Metals

A. I. Khorev p. 1087  abstract

Cutting-Force Measurement on the Basis of the Shaping Trajectory

V. V. Yurkevich p. 1095  abstract

Development of Nanocoatings for Cutting Tools

Yu. G. Kabaldin, S. V. Seryi, and A. A. Utkin p. 1097  abstract

Elastic Displacement of a Technological System in Face Milling with Tool Wear

D. Yu. Pimenov, V. I. Guzeev, and A. A. Koshin p. 1105  abstract

Taking Account of the Tool’s Elastic Deformation in Describing Pressure Treatment

A. L. Vorontsov p. 1110  abstract

Low-Carbon Steel for Magnetic Systems in Automobile Generators

A. A. Aliev p. 1121  abstract

Global Developments in Machine-Tool Production in 2010

M. S. Smailovskaya, A. G. Boim, S. I. Gonyalin, and V. M. Grishin p. 1124  abstract

Determining Elastic Spindle Characteristics by the Finite-Element Model

A. F. Denisenko and M. V. Yakimov p. 1133  abstract

Automatic Superfinishing System

A. V. Korolev, I. G. Ivanov, and M. K. Reshetnikov p.1137  abstract

Superfinishing Head with Double Tool Oscillation

K. Yu. Luk’yanov p. 1139  abstract

Cutters of Increased Thermal Conductivity

A. S. Tsynovkin and Yu. S. Dubrov p. 1141  abstract

Surface Roughness in Lapping with Dosed Removal of Surface Layer

A. M. Gafarov, V. A. Gafarov, S. Sh. Aziz, and F. M. Kelbiev p. 1147  abstract

Influence of Cutting Conditions on the Stress at Tool’s Rear Surface

D. Yu. Pimenov, V. I. Guzeev, and A. A. Koshin p. 1151  abstract

Rational Rear Cutter Angles for Multipass Turning of a Complex Sinusoidal Contour Surface

V. V. Vorona and S. G. Chinenov p. 1156  abstract

Tangential Self-Oscillation of Cutting Wedge

A. V. Lobusov p. 1158  abstract

Impregnation of Abrasive Tools with Foaming Agents

V. A. Nosenko, A. P. Mitrofanov, and G. M. Butov p.1160  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.