Contents

Russian Engineering Research

Vol. 45, No. 10, 2025

Testing and Modeling of a Coaxial Heat Exchanger

V. N. Avrashkov, E. V. Besputina, E. M. Gnesin, D. V. Meshcheryakov, and N. V. Mitrokhov p. 1327  abstract

Investigation of Magnetic Noise in an Asynchronous Motor with a Rotor Shaft Eccentricity

A. I. Ermolaev, V. I. Erofeev, and A. S. Plekhov p. 1331  abstract

Stress in the Valve Spring of a Medium-Speed Engine

A. A. Varshavskiy, N. D. Chainov, and A. N. Krasnokutskiy p. 1339  abstract

Undercutting in Linear Planetary Pinwheel Gears

A. V. Chirkin and M. A. Pandurov p. 1344  abstract

Methodology for Assessment of Adhesive Strength of Thin Stressed Coatings

N. A. Voronin p. 1348  abstract

Application of Digital Technologies to Achieve Maximum Wear Margin for Clearance Fits

P. V. Golinitskiy, O. A. Leonov, and U. Yu. Antonova p. 1354  abstract

Calculation of a Highly Loaded Gear Coupling

A. S. Ivanov, E. S. Novikov, and S. V. Gasparyan p. 1360  abstract

Neural Network Control of the Condition of Agricultural Machinery

A. S. Dorokhov, Yu. V. Kataev, E. V. Pestryakov, N. A. Petrishchev, A. S. Sayapin, and M. N. Kostomakhin p. 1367  abstract

Stepper Motor as Part of a Vibration Generator of a Precision Engraving Machine

M. Kh. Magomedov, A. E. Gromov, A. V. Yakovlev, and G. M. Magomedov p. 1372  abstract

Malfunctions of the Output Valve Spring in an Automotive Diesel Engine

V. A. Zhulai, E. A. Tarasov, and E. V. Tarasova p. 1379  abstract

Effect of Nanosized Fillers on Wear Resistance of Polyether Ether Ketone

S. Li, E. B. Sedakova, A. D. Breki, and M. A. Skotnikova p. 1382  abstract

Analytical Model for Predicting Elastic Properties of Braided Lattice Structures Based on Micromechanics of Materials

S. A. Samipour and V. V. Batrakov p. 1386  abstract

Difficulties in Assessing the Manufacturability of Engineering Products

A. A. Troitskiy p. 1393  abstract

Mechanical Properties of the Bimetal Produced by Arc Surfacing of ER-70S-6 and ER309LSI Wire

D. A. Shatagin, M. V. Zhelonkin, N. S. Klochkova, M. A. Chernigin, and Yu. S. Mordovina p. 1397  abstract

Strength Assessment of Welded Joints with Fillet Welds

Yu. A. Tsumarev, E. Yu. Latypova, T. S. Latun, and M. V. Latun p. 1403  abstract

Surface Roughness of 3D-Printed Parts

V. E. Ovsyannikov and A. S. Gubenko p. 1406  abstract

Assessing the Crack Resistance of Steel from the Complete Tensile Deformation Diagram

A. I. Davidenko, M. N. Zakharov, and A. V. Medovshchikov p. 1410  abstract

Frictional Properties of Pressed Mixtures of Low-Alloy Iron Powder with Lubricants

S. A. Jafarova p. 1415  abstract

Investigation (on a Model) of the Effectiveness of Roughness Parameter Control in the Course of Tool Wear during Rolling Shaving

A. V. Sidorkin, V. D. Artamonov, Yu. V. Kovalev, and B. A. Malikov p. 1418  abstract

Investigation of the Transient Thermal State of the Process of Milling Workpieces Made of Various Materials

A. N. Unyanin, A. V. Chudnov, and I. Z. Dimukhametov p. 1423  abstract

Stochastic Simulation Model of Surface Microrelief after Machining with an Abrasive Tool

A. N. Popov, P. A. Mel’nikov, I. N. Bobrovskii, and F. V. Grechnikov p. 1428  abstract

Validation of a Simulation Model of Microrelief after Abrasive Machining

A. N. Popov, P. A. Mel’nikov, I. N. Bobrovskii, F. V. Grechnikov, and M. A. Glazunov p. 1433  abstract

Behavior of Protective Lubricant Coatings in Isothermal Stamping and Extrusion of Blade Blanks

A. V. Kurochkin, A. N. Sutyagin, O. S. Kurochkina, and N. V. Poluglazkova p. 1437  abstract

Development and Study of Equipment for Comprehensive Processing of Technogenic Polymer-Containing Materials

M. V. Sevostyanov, N. T. Shein, V. S. Sevostyanov, V. V. Obolonskiy, A. M. Protsenko, P. Yu. Goryagin, and V. A. Babukov p. 1440  abstract

Properties of Anticorrosion Coating Produced by Arc Metallization

V. V. Sirota, S. V. Zaitsev, A. S. Churikov, D. S. Prokhorenkov, D. S. Podgornyi, D. N. Perelygin, A. V. Konnov, and I. Yu. Moreva p. 1445  abstract

Physics-Informed Neural Network for Solving the Type III Green–Naghdi Heat Conduction Equation

Ya. A. Vakhterova and L. N. Rabinskiy p. 1448  abstract

Dynamics of a Liquid-Filled Cylindrical Shell under a Mobile Load and Excess Pressure

E. L. Kuznetsova and L. N. Rabinskiy p. 1452  abstract

On Clarifying the Asymptotic Behavior of the Complexity Function of the Bubble Sort Algorithm

Yu. A. Kostikov and A. M. Romanenkov p. 1455  abstract

Influence of Lean Manufacturing on the Labor Productivity and Organizational Efficiency of Industrial Enterprises

N. A. Mezina and G. V. Tikhonov p. 1460  abstract

The Impact of Innovation on Technological Development of Industrial Enterprises

N. S. Efimova and V. V. Kabakov p. 1464  abstract

An Adaptive Model for Digital Transformation of an Organization, Taking into Account the Level of Innovation Maturity

N. V. Arsen’eva, V. V. Kolosova, and G. V. Tikhonov p. 1469  abstract

Management of Logistical Business Processes at an Aircraft Plant

N. B. Zemlyanskaya and N. V. Kazakova p. 1475  abstract

Metal-Induced Crystallization of Silicon–Carbon Protective Coatings Using Microwave Radiation

R. N. Yastrebinskii, V. I. Pavlenko, A. V. Yastrebinskaya, D. V. Ivanov, and A. V. Akimenko p. 1479  abstract