Contents

Russian Engineering Research

Vol. 44, No. 10, 2024

Optimizing the Ring Matrix of a Granulating Press

A. V. Brusenkov, and D. N. Konovalov p. 1381  abstract

Experimental Simulation of Contact Fracture of Parts of a Driven Slotting Head

M. N. Zakharov, and A. V. Medovshchikov p. 1386  abstract

Improving the Load Capacity of Roller Bearings by Reducing the Contact Stress

F. G. Nakhatakyan, and D. F. Nakhatakyan p. 1391  abstract

Digital–Analog Piezoactuator for Nanotechnology and Robotics

S. M. Afonin p. 1395  abstract

Elastoplastic State of a Rod in Three-Dimensional Loading, Taking Account of Hardening, Softening, and Susceptibility to Damage

M. Olimov, Sh. M. Ismoilov, S. M. Abdujalilov, and D. V. Studenkova p. 1401  abstract

Methodology for Determining Rational Operating Time for a Reciprocating Displacement Hybrid Energy Machine with Regenerative Heat Exchange in Compressor and Pump Modes

V. E. Shcherba, and E. Yu. Nosov p. 1406  abstract

Wear Resistance and Surface Hardness of Diesel Crankshaft Journals

V. P. Lyalyakin, and D. B. Slinko p. 1412  abstract

Diagnostic System for Cracks in Gas Turbine Blades: Influence of the Gas Flow Velocity on the Signal

I. K. Andrianov, M. S. Grinkrug, M. K. Balli, and N. A. Novgorodov p. 1416  abstract

Nonlinear Effects in Modeling Rotor Systems on Hydrodynamic Fluid Film Bearings

A. S. Fetisov, and P. I. Levykh p. 1419  abstract

Influence of Magnetic-Viscous Friction on the Properties of a Magnetorheological Hydraulic Mount

A. V. Vanyagin, B. A. Gordeev, A. I. Ermolaev, S. N. Okhulkov, and A. S. Plekhov p. 1425  abstract

Procedure for Three-Dimensional Parametric Optimization of the Aerodynamic Layout of a Supersonic Passenger Aircraft Using Flypoint Parametrica

D. Yu. Strelets, L. S. Lavrishcheva, N. N. Staroverov, V. N. Novoselov, A. V. Fevral’skikh, and I. G. Bashkirov p. 1433  abstract

Influence of Vibrational Treatment of Epoxy Binder on Fiberglass Strength

O. Yu. Erenkov, E. A. Kulikova, and D. O. Yavorskiy p. 1441  abstract

Parameter Calculation in Constrained Extrusion of Unequal Channels with Hardening

A. L. Vorontsov p. 1444  abstract

Novel Method of Manufacture of Highly Porous Powder Products

A. T. Mammadov, A. I. Babaev, N. Sh. Ismailov, M. Ch. Guseinov, and B. B. Musurzaeva p. 1450  abstract

Development of the Element Base of Machine Tool Devices

N. A. Rodionova p. 1458  abstract

Synthesis of a Screw Transmission

V. N. Strel’nikov, A. N. Degtyar’, and T. A. Duyun p. 1460  abstract

Determining Shape Errors of Large Industrial Equipment by Aerial Laser Scanning

S. Yu. Lozovaya, N. M. Lozovoi, and S. I. Antsiferov p. 1464  abstract

Effectiveness of Ni–NiO–B4C Coatings Produced by Detonation Spraying for the Cutting Tools of Centrifugal Sugar Beet Cutters

V. V. Sirota, S. V. Zaitsev, D. S. Prokhorenkov, M. V. Limarenko, A. A. Skiba, A. S. Churikov, and A. L. Dan’shin p. 1468  abstract

More Effective Shaping in a Construction 3D Printer

M. Yu. Elistratkin, S. V. Vasheva, K. M. Levitskaya, E. A. Pospelova, N. I. Alfimova, and I. Yu. Bukhtiyarov p. 1472  abstract

Testing of a Laboratory System for Analysis of the Microwave-Shielding Properties of Photocatalytic Coatings on Concrete

D. S. Podgornyi, D. O. Bondarenko, and V. V. Strokova p. 1476  abstract

Development Methods for Pilotless Aircraft

S. I. Antsiferov, S. Yu. Lozovaya, A. V. Karachevtseva, and E. A. Sychev p. 1479  abstract

Polymer Composite with Prolonged Afterglow for Power Line Markers

R. N. Yastrebinskii, A. V. Yastrebinskaya, and S. N. Domarev p. 1483  abstract

Resource-Saving Technology for Polymer Waste Processing

V. S. Sevost’yanov, N. T. Shein, V. V. Obolonskii, M. V. Sevost’yanov, O. L. Berezhnoi, P. Yu. Goryagin, and A. M. Protsenko p. 1487  abstract

Crystal-Chemical Stabilization of Metallurgical Slag

V. V. Strokova, I. Yu. Markova, A. A. Logvinenko, S. N. Bondarenko, and A. N. Bodyakov p. 1491  abstract

Multiple-Product Hybrid Additive Manufacturing

S. I. Antsiferov, M. G. Matusov, D. V. Karpachev, E. A. Sychev, and A. V. Karachevtseva p. 1495  abstract

Improvement and Customization of Small Autonomous Copters for Monitoring and Diagnostics

A. E. Naumov, S. Yu. Lozovaya, S. I. Antsiferov, A. V. Dolzhenko, and P. A. Makhova p. 1500  abstract

Reducing the Mass of a Battery Case in a Pilotless Aircraft by Topological Optimization

N. S. Lyubimyi, A. A. Pol’shin, M. S. Chepchurov, A. A. Tikhonov, A. K. Mal’tsev, and M. V. Bytsenko p. 1504  abstract

Erratum

Erratum to: Erratum to Wire Arc Additive Manufacturing: Influence of Production Parameters on Layer Geometry

A. A. Snezhko, O. R. Luzanov, V. I. Kirillov, A. A. Fadeev, L. A. Martynova, and O. V. Shcherbina p. 1508  abstract

Erratum to: Erratum to Production of Machine Tools for the Aircraft Industry: Import Substitution

A. I. Tikhonov, and N. V. Prosvirina p. 1509  abstract