Contents

Russian Engineering Research

Vol. 42, No. 10, 2022

Soil Stresses due to a Propulsion Unit with a Rubber Caterpillar Track

V. I. Poddubnyi, A. Trächtler and A. Warkentin p. 965  abstract

Vibrational Motion of Soil-Compaction Tools in Agriculture

A. D. Djurayev, Sh. P. Alimukhamedov, V. M. Turdaliev, I. I. Sheraliev and M. Sherboev p. 969  abstract

Linear Reciprocating Magnetic Coupling

A. N. Bolotov, O. O. Novikova and V. V. Novikov p. 972  abstract

Pneumatic Suspension with a Flywheel Damper and a Hydraulic Shock Absorber

V. V. Novikov, I. M. Ryabov, A. V. Pozdeev, K. V. Chernyshov and D. A. Chumakov p. 978  abstract

Influence of the Gap between the Serrated Drum and the Bars on the Mechanical Cleaning of Raw Cotton

R. Kh. Rosulov p. 983  abstract

Improved Hammers for Crushers in Feed Production

R. M. Iskakov, I. K. Mamirbaeva, A. A. Gulyarenko, M. Yu. Silaev and A. S. Gusev p. 987  abstract

Thermal Efficiency of Involute Heat Exchangers

M. A. Lobanov, E. R. Abdeev, R. I. Saitov and A. A. Rukomoynikov p. 993  abstract

Delayed Supply of Lubricant to Frictional Pairs in Engine Startup

I. A. Il’chuk, S. A. Atamanov and E. V. Tinina p. 997  abstract

Pendulum-Type Instrument for Rapid Assessment of Tribological Characteristics

P. V. Puchkov and V. E. Ivanov p. 1002  abstract

Deep Grinding of Gas-Turbine Components Using Cubic Boron Nitride Wheels

D. I. Volkov and B. V. Tsvetkov p. 1007  abstract

Increasing Die Durability in Cold Stamping by Quenching with Intermediate Tempering

D. M. Berdiev, A. A. Yusupov, R. K. Toshmatov and A. Kh. Abdullaev p. 1011  abstract

Nonuniform Removal of Material at Adjacent Surfaces in Vibroabrasive Machining

Yu. V. Dimov p. 1014  abstract

Local Elastic and Limit Strength Characteristics of Epoxy Compositions with Hollow Glass Microspheres

V. V. Bardushkin, A. P. Sychev, I. V. Lavrov, V. B. Yakovlev, A. V. Bardushkin and A. A. Sychev p. 1020  abstract

Smart Selection of Milling Strategies for Complex Aircraft Components

A. V. Martynyuk, V. V. Kuritsyna and M. V. Siluyanova p. 1026  abstract

Verification of the Model of a Truck Chassis

S. A. Sergievskiy, A. V. Tumasov, A. V. Gerasin and A. P. Trusov p. 1029  abstract

Kinematics of a Two-Stage Transmission with Elliptical Gears for Nonuniform Motion

A. A. Prikhod’ko p. 1033  abstract

Stress–Strain State of Welds

E. V. Mitin and S. P. Sul’din p. 1037  abstract

Stress–Strain State of End Mills

E. V. Mitin and S. P. Sul’din p. 1041  abstract

Water-Jet Cutting of Glass Sheet

G. M. Bazenov, G. T. Itybaeva, A. Zh. Kasenov and A. S. Yanyushkin p. 1045  abstract

Tools for Friction Stir Welding in the Aviation Industry: Morphological Analysis

D. N. Kuritsyn, M. V. Siluyanova and V. V. Kuritsyna p. 1049  abstract

Controlling the Wire Position in Additive Electron-Beam Surfacing

D. N. Trushnikov, S. V. Varushkin, V. Ya. Belenkiy, I. A. Zubko and S. Pang p. 1054  abstract

Control of Three-Dimensional Surfacing

D. N. Trushnikov, M. F. Kartashev, R. P. Davlyatshin and F. R. Saucedo Zendejo p. 1058  abstract

Structure and Mechanical Properties of Al–Mg Alloy Workpieces in Multilayer Surfacing with Interlayer Deformation

G. L. Permyakov, D. N. Trushnikov, T. V. Ol’shanskaya, Yu. D. Shchitsyn, M. F. Kartashev and T. Hassel p. 1061  abstract

Smart System for Additive Manufacture of Metal Parts

E. N. Simonov and K. M. Vinogradov p. 1065  abstract

Effectiveness of FMEA Risk Analysis

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1070  abstract

Economic Efficiency of FMEA Risk Analysis

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1073  abstract

FMEA Risk Analysis on the Basis of Action Priorities

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1077  abstract

Quality Management Measures in FMEA

D. I. Panyukov, V. N. Kozlovskii, D. V. Aidarov and M. V. Shakurskii p. 1081  abstract

Assessment of Corporate Management on the Basis of Budgeting

A. N. Genova p. 1085  abstract

Digital PR and Communication with B2B Enterprises in the Digital Era

L. V. Bulantseva p. 1089  abstract

Drones in Labor Management

V. M. Kraev, P. A. Alekseeva and A. I. Tikhonov p. 1093  abstract

Influence of Cycle Parameters on the Overall Efficiency and Fuel Consumption of Aircraft Engines

A. V. Vikulin, V. A. Zemlyanaya, M. V. Siluyanova and N. L. Yaroslavtsev p. 1097  abstract

Errata

Erratum to: Digital Twins of CNC Machine Tools in the Reconfiguring of Aircraft Factories

K. S. Kul’ga, M. V. Siluyanova, I. A. Krivosheev, V. V. Kuritsyna, D. N. Kuritsyn and A. A. Valiev p. 1101  abstract