Contents

Russian Engineering Research

---

Vol. 40, No. 10, 2020

---

Gear-Shift Device for Crane Gearboxes

Yu. V. Remizovich and O. V. Abdulaeva p. 801  abstract

Interaction of Two Robots in Synchronized Operation

V. I. Chizhikov and E. V. Kurnasov p. 804  abstract

Anomalous Dynamics of Machines with Operational Defects

F. Ya. Balitsky and A. G. Sokolova p. 809  abstract

Design of Production Systems. 1. Development of the Design Procedure

S. A. Rusanovskii, M. P. Khudyakov and Yu. V. Klimov p. 815  abstract

Accuracy of Simplified Head for Monitoring Manufacturing Tolerances

Ya. L. Liberman, A. N. Makhiyanova and L. N. Gorbunova p. 819  abstract

Generalized Assessment of Machined Surfaces Quality

N. M. Rasulov, U. M. Nadirov and M. Z. Alekberov p. 822  abstract

Diamond Grinding of Hard-Alloy Punches Using Wheels with a Multilayer Composite Electrolytic Coating

M. A. Shavva and S. V. Grubyi p. 826  abstract

Use of Borides in Strengthening Fe–Ni–Mn–Mo–V–Ti–Nb Steel

E. N. Eremin, A. S. Losev, S. A. Borodikhin and I. A. Ponomarev p. 833  abstract

Temperature Simulation in Machining a Compressor Impeller

A. Yu. Albagachiev, E. S. Stramtsova and O. I. Kulakov p. 840  abstract

Thermodynamic Modeling of the Formation of Chromium Carbides in an Applied Metal Layer

N. P. Aleshin, N. V. Kobernik, A. S. Pankratov and V. V. Petrova p. 843  abstract

Wear-Based Assessment of the Life of High-Speed Taps

A. E. Dreval’ p. 848  abstract

Hybrid Burnishing of Cylindrical Workpieces with a Modified Hole Surface

A. V. Shchedrin, V. F. Aleshin, A. A. Bekaev and N. Yu. Chikhacheva p. 852  abstract

Equipment for Honing Precision Holes

R. A. Muratov, K. R. Muratov, E. A. Gashev and T. R. Ablyaz p. 857  abstract

Contact Pressure in Honing

K. R. Muratov, T. R. Ablyaz and E. A. Gashev p. 859  abstract

Influence of the Polishing Conditions on the Final Quality of a Single Crystal

K. R. Muratov, E. A. Gashev and T. R. Ablyaz p. 862  abstract

Influence of the Density of the Track Grid on the Surface Roughness in Raster Honing

K. R. Muratov, T. R. Ablyaz, E. A. Gashev and D. P. Ismailova p. 865  abstract

Wear Resistance of Composites Based on Expanded Graphite and a Steel Base with Structured Macroscopic Relief

D. M. Karavaev, E. V. Matygullina, N. N. Zubkov, D. V. Smirnov, O. Yu. Isaev and T. R. Ablyaz p. 867  abstract

Optimization of the Electrical Discharge Machining of Complex Components

T. R. Ablyaz, E. S. Shlykov and K. R. Muratov p. 870  abstract

Electrical Discharge Machining of Deep Holes

N. D. Ogleznev, S. A. Oglezneva, T. R. Ablyaz, E. S. Shlykov and K. R. Muratov p. 873  abstract

Influence of Wire EDM on the Surface Roughness of Products Obtained by Laser Surfacing

E. S. Shlykov, T. R. Ablyaz, K. R. Muratov and D. I. Tokarev p. 876  abstract

Electrical Discharge Machining of Polymer Composites

E. S. Shlykov, T. R. Ablyaz and S. A. Oglezneva p. 878  abstract

Creation of Textured Surfaces by Electrical Discharge Machining

T. R. Ablyaz, E. S. Shlykov, K. R. Muratov, L. D. Sirotenko and E. V. Matygullina p. 880  abstract

Adhesive Strength of Cobalt-Alloy Coatings Applied by Laser Surfacing on Structural-Steel Substrates

A. V. Shafranov, E. A. Morozov, K. R. Muratov, A. A. Drozdov and A. N. Yurchenko p. 882  abstract

Mechanical Characteristics of Cobalt-Alloy Samples Obtained by Laser Surfacing

A. A. Drozdov, E. A. Morozov and A. V. Shafranov p. 885  abstract

Quenching of Р6М5 High-Speed Steel by a Yb:YAG CW Laser

D. I. Tokarev, T. R. Ablyaz, A. A. Drozdov and E. A. Morozov p. 888  abstract

Laser Surfacing with Co30Cr12.5W Cobalt-Alloy Powder

E. A. Morozov, K. R. Muratov, A. V. Shafranov, A. A. Drozdov, L. D. Sirotenko and A. A. Kul’met’ev p. 890  abstract

---