Contents
Russian Engineering Research

Vol. 31, No. 10, 2011

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Rotor Synchronization of Two Motors on an Elastic Base

B. A. Gordeev, D. A. Kovrigin, and A. V. Leont’eva p. 923  abstract

External Characteristic of a Mechanical Transformer with Oscillation of the Internal Components

A. A. Blagonravov p. 928  abstract

Determining the Temperature Conditions in the Furnace of a Steam Engine

E. A. Olenev p. 933  abstract

Endurance Tests of Multimotor Electrohydraulic Drives with Random Parameter Variation

Yu. A. Medvedev and V. P. Kuznetsov^† p. 940  abstract

Sinking a Structural Element into the Ground from a Water-Based Platform

A. V. Chernikov and O. G. Penskii p. 945  abstract

Motion of Abrasive Granules and a Component in a Vibrating Container

F. S. Yunusov and R. F. Yunusov p. 951  abstract

Contact Stress and Strain of Cylinders in Skewing

F. G. Nakhatakyan p. 960  abstract

Resistance to Fretting Corrosion of Fuel Rods in a VVER-440 Water-Moderated Reactor
in Contact with Spacers

Yu. N. Drozdov, E. P. Osipova, V. N. Puchkov, V. V. Makarov,
A. V. Afanas’ev, and A. V. Grishakov p. 963  abstract

Systematization of the Contact-Surface Combinations in Frictional Pairs

V. A. Saninskii, N. A. Storchak, A. V. Sin’kov, and Yu. N. Platonova p. 968  abstract

Energetic Approach to Ensuring Wear-Resistant Frictional Surfaces in Machine Parts

A. G. Suslov p. 972  abstract

Patterns of Thermal Behavior of Metal-Cutting Machines

A. P. Kuznetsov p. 975  abstract

Influence of Thermal Displacement of the Spindle Axis in a Lathe on the Machining Precision

V. V. Yurkevich p. 985  abstract

Cutting Force in Face Milling with Tool Wear

V. I. Guzeev and D. Yu. Pimenov p. 989  abstract

Stress–Strain State of Ceramic Cutting Plate

V. V. Kuzin and V. I. Myachenkov p. 994  abstract

Nonsteady Acceleration of a Counterbalanced Support in a Metal-Cutting Machine
with a Gap in the Supply Drive

R. P. Pogrebnyak p. 1001  abstract

Stability of Forced Contact Closure in Centerless Grinding on Fixed Supports

O. V. Zakharov p. 1007  abstract

Assessing the Pliability of a Machine Tool’s Faceplate and Spindle Flange

V. A. Lizogub and E. N. Kashirskaya p.1010  abstract

Shaping Precision in Machining a Screw Surface

Yu. E. Petukhov and P. V. Domnin p. 1013  abstract

Temperature Fields of a Composite Lathe Cutter with Specialized Components

V. P. Cherkashin p. 1016  abstract

Diffusion Processes in a Muffle Furnace during the Nitriding of Cutting Ceramic

A. A. Ryzhkin, V. G. Solonenko^†, V. A. Kokhanovskii, V. N. Puchkin,
M. M. Aliev, L. A. Solonenko, T. V. Kononenko, and O. A. Ginina p. 1021  abstract

Cutting Forces in Machining by Lobed Wheels

Yu. V. Dimov and A. V. Shmatkova p. 1025  abstract

Surface Roughness in Honing with Dosed Removal of Surface Layer

A. M. Gafarov, V. A. Gafarov, and G. Sh. Aliev p. 1030  abstract

Kinematic Calculation of the Error in Gear Shaving

A. N. Golovko and I. V. Golovko p. 1034  abstract

New Seals for the Moving Joints of Hydraulic Power Cylinders

V. V. Burenin p.1036  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.