Contents
Russian Engineering Research

Vol. 30, No. 10, 2010

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Engineering Research ISSN 1068-798X.

Stress in the Base of Straight Barrel-Shaped Gear-Teeth in Cylindrical Involute Transmissions

V. I. Korotkin, D. Yu. Sukhov, and E. M. Kolosova p. 967  abstract

Gas Ejector with Isobaric Mixing Chamber

V. Yu. Aleksandrov and K. K. Klimovskii p. 976  abstract

Multimotor Electrohydraulic Drives in Automatic Control Systems

Yu. A. Medvedev and V. P. Kuznetsov p. 980  abstract

Mismatch of Rotational Kinematics of Controllable Truck Wheels

M. S. Vysotskii, D. A. Dubovik, and Yu. I. Nikolaev p. 989  abstract

Reliability of Free-Wheel Mechanisms in Pulsed Continuously Variable Transmission

V. P. Bondaletov, V. I. Medvedev, and A. V. Petrov p. 995  abstract

Influence of Skew Loads on the Stress–Strain State of the Metal Framework in a 100-t Crane

V. Yu. Sap’yanov and D. A. Bondarchuk p. 999  abstract

Euler–Savari Determination of Radii of Curvature of Cycloid Profiles

E. A. Efremenkov and An I-Kan p. 1001  abstract

The Elementary Cell in the Systemic Analysis of Frictional-Component Designs
for Diesel Engines

N. K. Sanaev and M. R. Guseinov p. 1005  abstract

Vibrational Diagnostics of Dynamic Systems with Dry Positional and Viscous Friction
in Free Oscillation

B. V. Lushnikov p. 1008  abstract

Contact of Elastic Bodies with Complex Frictional Surfaces

A. V. Orlov p. 1011  abstract

Unidirectional and Opposing Deep Grinding of Titanium Alloy
with Periodic Wheel Adjustment

V. A. Nosenko p. 1016  abstract

Improving the Design of Modular Tool Systems

K. A. Ukrazhenko p. 1022  abstract

Estimating Tool Properties on the Basis of Acoustic Emission

B. Ya. Mokritskii p. 1026  abstract

Assessing Diamond Grinding Wheels on the Basis of the Binder’s Relative Wear Rate

A. V. Popov p. 1029  abstract

Development of a New Theory of Thermal Cutting Processes
10. Analysis of the Basic Thermophysical Theories of Cutting (Part 7)

A. L. Vorontsov, N. M. Sultan-Zade, A. Yu. Albagachiev, and A. I. Savkin p. 1032  abstract

Reconfigurable Production Systems

I. Yu. Yunin and A. N. Feofanov p. 1036  abstract

Trends in the Numerical Control of Machine-Tool Systems

G. M. Martinov and L. I. Martinova p.1041  abstract

Formation of Stator Currents in the Simulation of Switched Electric Drives in Robots

A. G. Andreev and M. M. Stebulyanin p. 1046  abstract

Role of the Machine Tool’s Kinematic Structure in Ensuring Machining Precision

V. V. Bushuev and V. V. Molodtsov p. 1053  abstract

Optimizing the Structural Parameters of Conical Pairs with Circular Teeth

A. E. Volkov, D. S. Matveenkov, and V. I. Medvedev p. 1060  abstract

Design of Grinding Operations in Terms of Grinding-Wheel Ratings

D. V. Isakov p. 1065  abstract

Diamond Boring of Holes in Brittle Nonmetallic Components

A. V. Balykov, I. E. Androsov, and L. S. Listunov p. 1069  abstract

Correlation between Precision Characteristics in Turning

V. V. Yurkevich p. 1072  abstract

High-Strength Ceramic Composite with Nanostructural Coating in Environmentally
Benign Dry Cutting with Compensation of Lubricant Properties

A. S. Vereshchaka, A. K. Kirillov, E. S. Sotova, and A. V. Dacheva p.1074  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.