Vol. 67, No. 4, 2024
Ensuring Flight Safety in Aviation through Damage Risk Management in the Aviation System
p. 741 abstract
Flutter of an Orthotropic Cylindrical Shell
p. 749 abstract
Research of the Influence of Main Rotor Blades on Loads Acting on the Helicopter Fuselage during an Emergency Landing
p. 756 abstract
Weight Efficiency of Anisogrid Circular Cylindrical Shells in Transverse Bending
p. 768 abstract
Analysis of Helicopter Blade Anisogrid Composite Spar
p. 784 abstract
Mathematical Model of the Hail Formation Mechanics in the Atmosphere and Estimation of the Hail Impact Damage to Aircraft Structural Element
p. 793 abstract
Numerical Study of Propellers and Ducted Propellers in a Wide Range of Power Loads
p. 803 abstract
Problems of Existence and Ambiguity of Solution at Asymmetrical Reflection of Steady Shocks
p. 811 abstract
Numerical Study of the Efficiency of Single-Row Ducted Propellers with Equal Solidity and a Different Number of Blades
p. 821 abstract
Integration of the Results of the Control and Measurement of Blade Airfoil into the Computational Study of the Fan Stage Workflow
p. 828 abstract
The Effect of Cooling on Turbine Operation
p. 837 abstract
Wave Field near the Slot Channel Outlet Formed in Pulsation Mode at Convective-Film Cooling of a Plate
p. 842 abstract
Study of Thermal State of the Main Discharge Simulation Unit of Stationary Plasma Thruster Microelectronic Simulator
p. 852 abstract
Determination of the Local Loss Coefficient of Connecting Elements of Aviation Hydraulic Systems Based on a Virtual Experiment
p. 858 abstract
3D Investigations of Nozzle Cluster Platform Cooling in the Variant with Doubled V-Shaped Dimplesand Hemispherical Protrusions between Them and in the Variant with Ribs when the Platform Is Blowing off through the Holes in the Shield
p. 870 abstract
Study of Laminar Combustion Rate of Various Fuels
p. 883 abstract
FDM Printing of Unmanned Aerial Vehicles Elements on a Non-Separable Substrate
p. 892 abstract
Means of Providing the Monitoring Using Unmanned Aerial Systems
p. 900 abstract
Manufacturing Technology of High-Temperature Radio-Transparent Composite Material
p. 906 abstract
Influence of Sudden Expansion at the Exit of the Active Nozzle on the Performance of a Liquid Ejector
p. 913 abstract
Computing the Tessellation and Curvature of the Six-Ray Reverse Folded Core for Sandwich Panels
p. 922 abstract
Engineering Analysis of Tasks and Characteristics of a Ground-Based Mobile Air Traffic Control System for Unmanned Aerial Vehicles
p. 934 abstract
Information Capacity Improvement for Deep Space Communication Radio Systems Using Companion Relay Satellites
p. 942 abstract
Experimental Studies of Electromagnetic Interference in Aircraft Communication Lines on Exposure to Radiation from Radio Transmitter Antennas
p. 951 abstract
Investigation of Frequency Characteristics of Electromagnetic Interference Attenuation by a High-Frequency Filter in a Frequency Range from 9 kHz to 100 MHz in Aerospace Systems when Operating on a Variable Load
p. 959 abstract
Transients in the Pulse Phase Locked Loop with Fractional-Variable Frequency Dividers and Switching Elements
p. 974 abstract
Layout of Aircraft Onboard Equipment Electronic Units Taking into Account the Electromagnetic Compatibility Criterion
p. 987 abstract
Experimental Validation of Spectral Sensing Models for Identification of Signals by Means of Artificial Intelligence
p. 995 abstract