Vol. 66, No. 3, 2023
Investigation of the Kinetics of Changes in Performance of Oil for Aircraft Gas Turbine Engines
p. 415 abstract
Flutter of a Conical Shell
p. 422 abstract
Mechanical Model of a Space Elevator. Statics
p. 432 abstract
To Estimation of the Parameters of Mathematical Models Characterizing the Strength of an Aircraft after Critical Situations
p. 443 abstract
Influence of the Order of Vehicle Motion Equations in the Implementation of an Adaptive Flight Control System with the Real Time Identification of Controlled Element Dynamics Parameters
p. 449 abstract
Adaptive Neural Network Control of Space-Mission Universal Mechatronic Module
p. 458 abstract
Active Generation of Lift Force in the “Wing–Ejector” Integral Aerodynamic Configuration
p. 469 abstract
Study of Applicability of Turbulence Models for Calculations of a Microturbine Engine Centrifugal Compressor under Laminar-Turbulent Transition Conditions
p. 476 abstract
Improvement of the Control System for the Wing Performance of an Unmanned Aerial Vehicle
p. 485 abstract
Study of Aerodynamics of Propulsive Helicopter Fuselage
p. 493 abstract
Exact Solutions to the Navier–Stokes Equations with the Boussinesq Approximation for Describing Binary Fluid Flows
p. 500 abstract
The Impact of Some Factors of Thermal Protection Material Degradation on the Discharge Coefficient of the Recessed Nozzle
p. 510 abstract
Improving the Accuracy of Numerical Simulation of the Fan Stage Taking into Account the Production Deviations of Blades
p. 520 abstract
One-Dimensional Model for Calculation of Flow Parameters in a Supersonic Air Intake
p. 528 abstract
Numerical and Experimental Studies of the Plate Heat Exchanger Module of the Small-Sized Gas Turbine Engine with Heat Recovery
p. 534 abstract
Sources of Self-Oscillations in an Ejector Pulsejet Engine
p. 542 abstract
Intelligent Adaptive Flight Crew Decision Support System for Thunderstorm Avoidance
p. 552 abstract
Analysis of Accuracy of the Electronic System with the Fixed Receiver of Incoming Flow for Spatial Measuring the Aircraft Motion Air Parameters
p. 560 abstract
Possibilities of Supercritical Fluid Technologies in the Task of Modification of Polymer Composite Materials Used in Aircraft Engineering
p. 568 abstract
Improving the Molding Process to Obtain Thin-Walled Axisymmetric Parts of a Truncated Tapering Shape
p. 573 abstract
Thermal Conductivity of New Carbon Polymer Composite Materials
p. 581 abstract
Mathematical Modeling of Vacuuming of a Dry Technological Stack of Semipregs. I
p. 586 abstract
Research of the Radiated Electromagnetic Interference from Power Devices of the Aircraft under Modernization
p. 596 abstract
The Predictive Adaptive Copy Forwarding Routing Algorithm in the Data Transmission Network of a Spatially Distributed Infocommunication Monitoring System
p. 605 abstract
Application of Blind Signal Separation Methods in the Problems on Improving the Interference Immunity of Space Communication Systems with Quadrature Amplitude Modulation
p. 615 abstract
Computational Modeling of Helicopter Loading Processes during Splashdown in Dynamic Statement
p. 625 abstract