Vol. 55, No. 3, 2019
Adsorption of Hydrogen in Microporous Carbon Adsorbents of Different Origin
p. 413 abstract
Absolute Isotherms of Adsorption of Components of Binary Liquid Solutions of Macro- and Microporous Adsorbents
p. 420 abstract
Spherical Mesoporous Carbon Adsorbents for Sorption, Concentration, and Extraction of Nicotine and Other Components of Cigarette Smoke
p. 423 abstract
Y-Type Zeolites Modified by Transition Metal Nanoparticles for Separating Argon from a Mixture with Oxygen
p. 433 abstract
Analysis of Techniques for Improving the Adsorption Capacity of Talc
p. 439 abstract
Dissolution Behavior of an Iron–Aluminum Double Anode and the Physicochemical Properties of the Dissolution Products
p. 445 abstract
Excess and Absolute Adsorption from Binary Liquid Solution by Microporous Crystalline Adsorbents: Cumene + n-Octane/Zeolite NaX
p. 451 abstract
Thermally Initiated Processes in Activated Metal–Polymer Composites Obtained by High-Pressure Plastic Deformation of Aluminum-Based Mixtures
p. 460 abstract
Graphene Oxide as a Basis for Molecular Design
p. 468 abstract
The Effect of Acetonitrile Additives to Tetraborate Electrolyte on the Composition and Morphology of PEO Layers on Titanium
p. 473 abstract
Copper-Doped Zinc Oxide Nanoparticles for the Fabrication of white LEDs
p. 481 abstract
Local Dissipative Relaxation Processes in a Latex Polymer at Negative Temperatures
p. 487 abstract
Aging of Water-Soluble Formulations for Inkjet Printing of Functional Layers Based on Polyaniline
p. 491 abstract
Synthesis and Characterization of Novel Poly (VAC-VeoVa-HFMA-BZMA) Latex via Semicontinuous Seeded Emulsion Polymerization
p. 495 abstract
Approaches to Increasing the Adhesion Strength of Hard Wear-Resistant Nanostructured Coatings Based on the Ti–B–(Cr, Si, C)–N System
p. 502 abstract
The Effect of Organic Acids in the Presence of Cyclic Lactams on Kinetics of Electrodeposition and Morphology of Nickel Coatings Modified with Polymer
p. 511 abstract
An Investigation of the Protective Action of a Coating Based on Yttrium Aluminosilicate System on Silicon Carbide Material at a Temperature up to 1500°С
p. 520 abstract
Friction and Wear Behavior of Multilayer [Al/AlN]n Coatings Deposited on AISI52100 Steel
p. 527 abstract
Degradation of the Tensile Properties of an Au-Coated 316L Stainless Steel Bipolar Plate in a Fuel Cell Stack
p. 535 abstract
Anticorrosion Performance of Sol–Gel Driven SIO2-Al2O3 Coatings on Low Carbon Steel
p. 539 abstract
Anisotropy in Mechanical Properties and Corrosion of X-52 Pipeline Steel at Different Pipe Angles
p. 546 abstract
Corrosion Resistance Behavior of Cr–Cu Alloyed Thermo-Mechanically Treated Reinforced Bars in 3.5% NaCl Solution
p. 554 abstract
An Acid Inhibitor Research: 5-Phenyl-1H-1,2,4-triazole-3-thiol
p. 566 abstract
Adsorption and Corrosion Inhibition of Cu in Nitric Acid by Expired Simvastatin Drug
p. 572 abstract
Comparison of Surface Coatings by Plasma Spray Technique and Biomimetic Deposition on Ti Alloy Substrate: Morphology, Composition, and Corrosion Resistance Property
p. 583 abstract
Inhibition of Carbon Steel Corrosion in Neutral Calcareous Synthetic Water by Eruca sativa Extract
p. 591 abstract
Corrosion Inhibition of Mild Steel in Hydrochloric and Nitric Acid Solutions Using Willow Leaf Extract
p. 603 abstract
Surface Characterization and Corrosion Resistance of Boron Nitride Coated Titanium Dental Implants
p. 608 abstract
Features of a Double Electric Layer on Carbon in a Broad Temperature Range. Measurements in Water
p. 615 abstract