Contents

Polymer Science, Series D

---

Vol. 18, No. 4, 2025

---

Efficiency of Lubricant Properties of Derivatives of Dithiophosphoric, Xanthogenic and Trithiocarbonic Acids

El. Sh. Mamedov, D. S. Velieva, T. N. Kulibekova, I. R. Rushinaz, and Z. S. Safaralieva p. 673  abstract

On the Possibility of Involving in Recycling of Samples of Primary and Secondary Polyethylene Terephthalate Processing Wastes of “POLYEF” JSC

V. V. Chernova, A. S. Shurshina, E. M. Zakharova, M. V. Bazunova, and E. I. Kulish p. 680  abstract

Phenol–Formaldehyde Based Composites Containing Coal as a Filler

M. J. Ibrahimova, F. M. Abdullayeva, T. A. Ibrahimova, and Z. N. Pashayeva p. 685  abstract

Synthesis of a Thermally Stable Ionic Liquid Monomer Based on a Quaternization Reaction

M. J. Ibragimova, F. M. Abdullayeva, Z. N. Pashayeva, and E. Z. Huseynov p. 692  abstract

Catalytic Potential of N-Methylpyrrolidone Hydrosulfate: A Short Review of Applications in Chemical Reactions

E. H. Mammadbayli, M. J. Ibrahimova, Z. N. Pashayeva, and G. A. Hajiyeva p. 698  abstract

Investigation of the Structure and Properties of Polypropylene Filaments

F. F. Guseinova, L. Y. Zakirova, and N. N. Shishkina p. 709  abstract

Influence of N,N-Diallylacrylamide Lactate Derivatives on the Structure and Properties of Polypropylene

A. V. Blyashev, M. B. Begieva, and A. M. Kharaev p. 713  abstract

The Effect of the Surface Density of a Carbon Cloth on the Moisture Transfer and Climatic Aging of Carbon-Fiber-Reinforced Plastic

O. V. Startsev, E. V. Dvirnaya, V. O. Startsev, and A. G. Gunyaeva p. 721  abstract

Synthesis of Polyethylene Glycol Dimethacrylate for Dental Use

K. K. Shirshin, V. I. Igoshina, A. L. Esipovich, and V. P. Chuev p. 731  abstract

A Study of the Influence of Composite Material Properties on the Value of the Stress-Intensity Factor by Simulation Modeling

A. S. Borodulin p. 736  abstract

Study of the Kinetics of the Process of Spreading Oligomeric Binders over the Surface of a Lunar Soil Analogue

T. Ch. Pkhon, M. V. Khudorozhko, and G. V. Malysheva p. 740  abstract

A Study of the Rheological Properties and Stability of the Structure of Epoxy Oligomers Filled with Carbon Black and Graphite

O. I. Loban, Yu. V. Olikhova, I. Yu. Gorbunova, and M. V. Kovalev p. 745  abstract

Study of Compatibility of Binary and Ternary Ethylene Copolymers

N. Yu. Budylin, K. B. Vernigorov, A. R. Khuzakhanov, R. R. Khasbiullin, U. V. Nikulova, A. V. Shapagin, S. N. Rusanova, V. I. Mashukov, Yu. M. Kazakov, and O. V. Stoyanov p. 752  abstract

Fractal Analysis of the Structure of Elastomeric Nanocomposites Filled with Metallic and Ceramic Nanoparticles

R. I. Li, D. N. Psarev, M. R. Kiba, Yu. R. Li, and A. S. Komolikov p. 759  abstract

Improvement of the Gluing Technology of Bent-Glued Pieces

E. G. Sokolova p. 764  abstract

Nontoxic Wood–Polymer Compositions Based on Modified Amine–Formaldehyde Resins

V. E. Tsvetkov, O. P. Machneva, M. Yu. Ekimova, and A. E. Shkuro p. 770  abstract

The Principles of Formation of Wood–Polymer Compositions Based on Synthetic Resins

V. E. Tsvetkov, M. Yu. Ekimova, and O. P. Shchelakova p. 774  abstract

A Method for Increasing the Fire Resistance of Solid Wood

G. S. Varankina, N. G. Kolesov, S. V. Anosov, D. S. Rusakov, and Ar. A. Fedyaev p. 779  abstract

Modern Trends in the Development of Adhesive and Sealing Compositions Based on Nitrile–Butadiene Rubber (A Review)

Kh. S. Abzal’dinov, K. N. Slobodkina, K. B. Vernigorov, V. I. Mashukov, A. S. Ziganshina, Yu. M. Kazakov, and O. V. Stoyanov p. 785  abstract

A Technology for Manufacturing Three-Layer Honeycomb Structures Based on VKU-59 Carbon-Fiber-Reinforced Plastic and VPS-68 Fiberglass and Thick-Walled Structures Based on VKU-59 Carbon Fiber

A. I. Starkov, K. E. Kutsevich, A. Yu. Isaev, N. F. Lukina, and A. A. Barannikov p. 797  abstract

A Study of the Thermodynamic Characteristics of Epoxy Oligomers after Combined Electromagnetic Treatment

S. P. Isaev, O. Yu. Erenkov, and D. O. Yavorskii p. 807  abstract

Application of Fire-Retardant Compositions for Veneer Processing in Plywood Production

E. G. Sokolova, G. S. Varankina, S. V. Anosov, and N. D. Syutkin p. 812  abstract

Epoxy-Polyetherimide Polymers: Structure and Viscoelastic Properties

S. V. Polunin, I. Yu. Gorbunova, K. A. Atamas, A. A. Abduvakhidova, and V. Kh. Aleshina p. 820  abstract

Ethylcellulose Composites with a Fertilizer Effect and Water-Retention Properties

P. S. Zakharov, A. E. Shkuro, V. V. Glukhikh, and V. E. Tsvetkov p. 824  abstract

The Law of Attraction of Two Solid Balls Growing in a Viscous Liquid and Due to It

R. A. Turusov, K. A. Babkin, V. V. Metlov, and D. A. Udras p. 833  abstract

Use of Hemp (Cannabis sativa) Biomass Components and Activated Carbons Based on Them to Remove Pollutants from Aqueous Media: 2. Organic Compounds and Metal Ions

I. G. Shaikhiev, E. N. Khabibrakhmanova, K. I. Shaikhieva, and T. R. Deberdeev p. 842  abstract

The Influence of Secondary Polymer Raw Materials on the Structure and Properties of Polyethylene–Polylactide Mixtures in the Photodegradation Process

M. V. Podzorova, Yu. V. Tertyshnaya, L. A. Kolesnikova, V. S. Kondrev, and L. Yu. Yakubova p. 848  abstract

Study of the Combustion Process and Modes of Fire-Protected Wooden Structures

F. B. Abdukadirov, A. B. Sivenkov, and B. A. Mukhamedgaliev p. 854  abstract

The Flammability and Physicomechanical Properties of Composites Based on Low-Density Polyethylene and Noncovalent Additive (Melamine–Cyanuric Acid)

T. A. Borukaev, L. I. Kitieva, and Zh. A. Kochkarov p. 859  abstract

Analysis of Properties of Secondary Polymer Raw Materials and Polyethylene-Based Mixtures

M. V. Podzorova, L. A. Kolesnikova, and V. S. Kondrev p. 865  abstract

A Study of Mechanisms of Cavitation–Abrasive Processing Using High-Speed Shooting. Part 1

S. K. Sundukov, R. I. Nigmetzyanov, D. S. Fatyukhin, and V. K. Koldyushov p. 869  abstract

A Study of Mechanisms of Cavitation–Abrasive Processing Using High-Speed Shooting. Part 2

S. K. Sundukov, R. I. Nigmetzyanov, D. S. Fatyukhin, and V. K. Koldyushov p. 875  abstract

Synergistic Effects of Nonstoichiometric P–N Flame Retardants Based on Melamine and Ammonium Derivatives of Phosphoric Acid. Part 1. A Literature Review

S. Kh. Toirov, Yu. M. Evtushenko, I. O. Kuchkina, I. V. Bezsudnov, V. A. Ushkov, and A. A. Berlin p. 882  abstract

Ionic Liquids as Modifiers of Properties of Fillers and Polymer Materials

O. I. Sidorov, A. N. Osavchuk, O. B. Vatueva, S. N. Vetrov, K. A. Tkachev, D. A. Fedorov, M. I. Buzin, and K. A. Dubkov p. 887  abstract

Application of Machine-Learning Methods to Optimize the Conductive Surface Quality and Permeability of Porous Structures Obtained by Selective Laser Melting

A. L. Galinovskii, D.A. Martysyuk, E. D. Katkova, Z. S. Terent’eva, and Yu. K. Kostromin p. 897  abstract

Modeling the Movement of a Hydroabrasive Flow with a Surfactant in the Nozzle Channel of a Hydroabrasive Machine

O. G. Kozhus, G. V. Barsukov, A. L. Galinovskiy, T. A. Zhuravleva, and A. V. Petrukhin p. 903  abstract

Selection of Temperature–Time Parameters for Additive FDM Printing of Products from Low-Modulus Filaments Based on Thermoplastic Elastomers

A. N. Ivanova, A. A. Pykhtin, and A. A. Yurkin p. 909  abstract

An Analysis of the Effect of Ultradisperse Powder Additives on the Structure and Wear of Hard-Alloy Drill Plates under the Conditions of Impact–Abrasive Wear

M. V. Fedorov, M. I. Vasil’eva, G. G. Vinokurov, and A. M. Klimova p. 915  abstract

Modification of Rubber Crumb during Swelling in Solutions of Styrene—Butadiene–Styrene Thermoplastic Elastomer

K. V. Sukhareva, I. A. Mikhailov, N. O. Belyaeva, A. D. Buluchevskaya, O. S. Lavrukhina, and O. V. Fukina p. 922  abstract

Thermoplastic Elastomers Based on Propylene–1-Octene Copolymers

T. I. Medintseva, P. M. Nedorezova, A. N. Klyamkina, and E. V. Prut p. 929  abstract

Powder Materials and Their Applications

V. A. Skryabin p. 935  abstract

The Effect of Small Amounts of Plasticizers on the Properties of Segmented Polyurethane Urea Elastomers

A. V. Savchuk, V. Yu. Senichev, M. A. Makarova, and E. V. Pogoreltsev p. 939  abstract

The Influence of Graphene on the Thermophysical Properties of Carbon Fiber Plastic

V. A. Nelyub and A. Papich p. 946  abstract

Prospects for the Application of Chopped Fiber-Based Polymer Coatings for Protecting Elements of Ground-Based Transport and Technological Vehicles (Review)

A. M. Arakelyan, E. A. Dessert, and N. I. Baurova p. 948  abstract

The Effect of Water on the Fine Structure of Technora Aromatic Polyamide Fibers

T. V. Smotrina and O. V. Stoyanov p. 952  abstract

Methodology for Determining the Phase Composition of a Composite Based on Regolith and an Oligomeric Binder

T. Ch. Pkhon, A. A. Martyushova, M. V. Khudorozhko, and G. V. Malysheva p. 958  abstract

A Method for Selecting the Structure of a Polymer Composite Material Using Neural Network Modeling

A. A. Baurov and V. A. Nelyub p. 962  abstract

Study of the Structure and Properties of Aluminum Alloy Prototypes for the Production of Electrical Conductors

S. A. Pakhomova and E. S. Sakharova p. 966  abstract

The Effect of Porosity on the Physicomechanical Properties of Composite Materials Based on Epoxy Resin

R. A. Alekhina, R. M. Kasimov, and V. E. Slavkina p. 972  abstract

Biocidal Properties of Composite Material Based on Epoxy Resin Filled with Copper Oxide Nanoparticles

M. P. Danilaev, T. R. Deberdeev, E. A. Bobina, S. V. Drobyshev, S. A. Karandashov, M. A. Klabukov, V. A. Kuklin, I. V. Lunev, G. Yu. Yakovleva, and O. N. Ilyinskaya p. 976  abstract

A Study of the Capability and Feasibility of Producing a Carbon–Carbon Composite Material Modified with Carbon Nanotubes in a Single Technological Process

V. M. Bushuev, N. I. Berdnikova, A. L. Tokarev, and R. T. Gizatullin p. 985  abstract

The Effect of the Type of the Binder on the Compressibility of Dispersion-Filled Composites for the Powder Injection Molding Technology

A. N. Muranov and M. S. Mikhailov p. 992  abstract

Preparation and Evaluation of the Properties of a Sorption Material Based on Flax Cellulose Impregnated with Silica

D. S. Orlov, K. A. Taraskin, E. K. Barnashova, E. A. Vertikova, A. D. Simagin, and N. M. Valieva p. 997  abstract

Cross-Linked Urethane–Urea Elastomers Based on Oligoether and Oligoester

V. Yu. Senichev, M. A. Makarova, and E. V. Pogorel’tsev p. 1002  abstract

Prospects for the Use of Polymer Composite Materials in the Design of Hybrid Vehicles

D. A. Kharitonov and N. I. Baurova p. 1007  abstract

Composites Based on Plasticized Cellulose Acetate with Water-Retaining Properties and a Fertilizing Effect

P. S. Zakharov, N. S. Shtabnov, A. E. Shkuro, and V. V. Glukhikh p. 1011  abstract

Analysis of the Influence of the Mixture Formulation, Amount, and Dispersity of Rubber Crumb on the Properties of Rubbers Based on NR and EPDM (Review)

K. V. Sukhareva, N. O. Belyaeva, T. V. Zhubreva, and E. N. Myasnikova p. 1019  abstract

On the Influence of Ceftriaxone on Some Properties of Materials Based on Polylactide and Chitosan

E. R. Bakirova, A. B. Sunargulov, and E. I. Kulish p. 1027  abstract

---