Vol. 16, No. 4, 2023

Polymer Science, Series D

Main Components Composing Domestic Epoxy Glues (Review). Part I

A. P. Petrova, A. Yu. Isaev, O. I. Smirnov and A. S. Emel’yanov p. 799 abstract

Main Components of Domestic Epoxy Adhesives (Review). Part II. Plasticizers and Elasticizers for Epoxy Adhesives

A. P. Petrova, A. Yu. Isaev, O. I. Smirnov and A. S. Emel’yanov p. 810 abstract

Studying the Rheokinetics of Curing Processes in Epoxy Amine Binders Modified with Carding Polysulfon

S. V. Polunin, I. Yu. Gorbunova, M. L. Kerber, E. V. Khokhlova, I. A. Kryuchkov and T. P. Kravchenko p. 824 abstract

Deformation Properties of an Elastic Adhesive in Glue Joints under Quasi-Static Low-Cycle Mechanical Loads

V. G. Tsverava, M. Yu. Rusin, A. V. Terekhin, D. V. Alekseev and P. Yu. Yakushkin p. 830 abstract

Calculating the Load-Bearing Capacity of Prestressed Wooden Beams

E. G. Khitrov, A. R. Birman, S. A. Ugryumov, V. V. Orlov, I. S. Frolov and O. N. Kovaleva p. 836 abstract

Modern Phenolic Adhesives for Aviation and Engineering. Part 2. Chemical Modification

D. A. Aronovich and A. P. Petrova p. 840 abstract

Properties of Composite Materials Based on Cardboard and Polymer Films

V. N. Serova and A. I. Khasanov p. 855 abstract

The Effect of the Structure of Heterocyclic Monomers on the Heat Resistance of Epoxy Adhesives

V. F. Stroganov, E. A. Vdovin and I. V. Stroganov p. 858 abstract

Properties of Polymers Obtained by the Mechanism of Anionic Polymerization of Epoxy Resins under the Action of Imidazoles

M. S. Fedoseev and L. F. Derzhavinskaya p. 862 abstract

Ultrasonic Technologies in Producing Adhesive Joints: A Review

S. K. Sundukov p. 868 abstract

Methodological Aspects of Determining Fiber—Matrix Adhesive Strength by Pushing out Monofilament with an Indenter

A. I. Gulyaev, S. V. Sbitneva, D. V. Zaitsev and P. N. Medvedev p. 875 abstract

The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder

N. V. Antyufeeva and A. I. Starkov p. 882 abstract

Mechanism of Cumene Oxidation into Cumene Hydroperoxide (Curing Initiator for Acrylic Adhesives) in the Presence of Ca, Sr, Ba Chloride Complex with Dibenzo-18-Crown-6 Ether

N. A. Novikov, N. V. Ulitin, Ya. L. Lyulinskaya, D. A. Shiyan, K. A. Tereshchenko, N. M. Nurullina, M. N. Denisova, Kh. E. Kharlampidi and O. V. Stoyanov p. 892 abstract

Chemical Resistance of Epoxy Binders Based on Various Hardeners

Z. G. Sakoshev and A. N. Blaznov p. 901 abstract

Determination of Viscoelastic Characteristics of Epoxy–Sand Composites Used in Repair of Road Machinery

T. N. Egunova, N. I. Baurova and I. S. Nefelov p. 905 abstract

A Study of the Structure and Thermodynamic Properties of Polyvinyl Acetate Dispersion after Microwave Electromagnetic Treatment

S. P. Isaev, O. Yu. Erenkov, D. O. Yavorskii and E. A. Kulikova p. 909 abstract

A Theoretical and Experimental Study of Spindle Assembly Rigidity with a Polymer Interlayer in Supports of a Metalworking Machine

A. S. Kononenko and T. A. Kildeev p. 916 abstract

Study of the Kinetics of the Interaction Process of Material of “Liquid” Phase and Epoxy Binder

E. A. Kosenko, V. A. Nelyub and N. I. Baurova p. 924 abstract

Kinetic Modeling of Synthesis of Cumene Hydroperoxide (a Curing Initiator for Acrylic Glues) in the Presence of Mg, Ca, Sr, or Ba 2-Ethylhexanoate as a Catalyst

N. V. Ulitin, N. A. Novikov, K. A. Tereshchenko, D. A. Shiyan, Ya. L. Lyulinskaya, N. M. Nurullina, M. N. Denisova, O. V. Stoyanov and Kh. E. Kharlampidi p. 928 abstract

Adhesive Materials Based on Copolymers of Sodium 2-Acrylamido-2-Methylpropane Sulfonate

L. B. Yakimtsova, Ya. K. Martinkevich and E. T. Krut’ko p. 936 abstract

The Influence of Loading Conditions under Mechanical Impact on Polymer Composite Materials

A. M. Gubin and I. N. Gulyaev p. 941 abstract

Film Formers Based on Plant Raw Materials for Polyurethane Coatings: A Review

A. A. Kozlova, T. M. Rakova and D. S. Derkov p. 949 abstract

A Study of the Influence of Negative Temperatures on the Impact Strength of a Carbon-Fiber Composite with a Hybrid Matrix

E. A. Kosenko, N. I. Baurova and V. A. Zorin p. 957 abstract

Application of Various Brands of Silica Fillers in the Formulation of Treads of Car Tires

A. Yu. Lyushtyk, S. N. Kayushnikov, Zh. S. Shashok, E. P. Uss, E. V. Fedulova, Yu. V. Grabko and O. V. Stoyanov p. 965 abstract

Automated Dosing Equipment for Triplex Production by the Pouring Method

V. S. Bezmenov p. 971 abstract

The Effect of Liquid Viscosity on Aerosol Parameters upon Ultrasonic Spraying

R. I. Nigmetzyanov, S. K. Sundukov, A. V. Sukhov, V. M. Prikhod’ko and D. S. Fatyukhin p. 978 abstract

Some Aspects of the Generalized Energy Approach to the Processes of Destruction of Materials

M. I. Sidorov, M. E. Stavrovskii, I. N. Kravchenko, A. V. Ragutkin and D. I. Petrovskii p. 984 abstract

A Study of the Character of the Effect of an Organophosphorus Acid on the Physicochemical Characteristics of Block Copoly(sulfone arylate)s

A. Kh. Shaov, A. M. Kharaev, R. Ch. Bazheva and R. A. Kharaeva p. 989 abstract

Evaluation of Uniformity of Particle Distribution in Composite Materials Based on Molded Polyurethanes

R. A. Alekhina, S. P. Tuzhilin, A. S. Sviridov and Yu. A. Goncharova p. 993 abstract

A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates

V. A. Danilov, O. A. Kolyamshin, A. N. Vasil’ev, N. E. Temnikova, M. V. Kolpakova and O. V. Stoyanov p. 998 abstract

Estimating the Fuel Permeability of Thermoplastic Polyurethane from the Saturated Vapor Pressure of Kerosene

D. V. Kolotilin, E. A. Manzhelii, D. O. Shchepilov, A. V. Dedov and V. F. Danilov p. 1004 abstract

A Melamine Polyphosphate-Filled Thermoprotective Coating Based on Polyetherurethane Rubber and Chlorinated Epoxy Oligomers

O. I. Sidorov, V. A. Pilchenko, T. V. Bochkova, A. A. Shalaev, D. V. Zhesterev, D. V. Pleshakov and M. I. Buzin p. 1008 abstract

Stability in Supersonic Flow of Complex-Shaped Composites Based on Reinforced Inorganic and Cold-Curing Hybrid Binders

V. M. Lalayan, E. V. Stegno, N. A. Abramova, A. M. Rytsarev, A. Yu. Shaulov and A. A. Berlin p. 1017 abstract

Prediction of Electrophysical Properties of Organic-Inorganic Composite Materials

L. V. Gorobinskii, N. Yu. Lysov, A. L. Panin, A. A. Panov, A. V. Polyudchenkov, M. A. Kravchenko and V. I. Zhun’ p. 1023 abstract

Influence of Machining Modes and Negative Temperature on the Static Bending Strength of Carbon Fiber Reinforced Plastics

I. S. Bolotnikov, E. A. Kosenko and P. E. Demin p. 1028 abstract

A Study of the Properties of Mineral, Chemical, and Vegetable Fibers

P. A. Medvedev, A. N. Blaznov, I. V. Cheremukhina, Z. G. Sakoshev, G. S. Zadvornykh, E. G. Sakoshev and V. V. Firsov p. 1034 abstract

Contents

Polymer Science, Series D