Vol. 15, No. 4, 2022
Binders Based on the Solutions of Polyvinyl Butyral in Tris(1-methacryloxy-3-chloro-2-propyl) Phosphate and Glycidyl Methacrylate for Low-Flammability Polymers
p. 489 abstract
Adhesion Properties of Polyethylene and Ethylene-Vinyl Acetate Copolymer Blend with Acrylate Copolymers of Ethylene
p. 494 abstract
Nanocomposites Based on Polyepoxyurethane-Containing Isocyanurate Binders
p. 499 abstract
Oil Absorption of Dispersed Powders and Determination of the Maximum Amount of Fillers in Polymer-Composite Materials
p. 503 abstract
The Influence of Adhesive Characteristics on the Stress–Strain State of Glue-Welded Joints
p. 509 abstract
Increasing the Adhesion of Hybrid Polyurethane Materials
p. 513 abstract
A Method for Assessing the Adhesion Strength of an Elementary Fiber–Epoxy Matrix System
p. 517 abstract
Theoretical Substantiation of the Conditions for the Applicability of Deformationless Fixation by Means of a Polymer Glue for Workpieces during Their Mechanical Processing on a Milling Machine with Computer Numerical Control
p. 523 abstract
Restoring the Neck of a Reducing-Gear Shaft by Gluing a Reinforced Bush
p. 529 abstract
Binders Based on Epoxy Polymer Mixtures and Thermoelastoplastics. Part 5. Physicomechanical Properties of Epoxy Polymers Modified with Polysulfone–Polydimethylsiloxane–Polysulfone Block Copolymers
p. 535 abstract
Salts of Tartaric Acid As Modifiers of Aminoformaldehyde Resins
p. 540 abstract
A Spectrophotometric Study of the Interaction of Aromatic and Aliphatic Iodine-Containing Substances with Dimethyl Sulphoxide
p. 543 abstract
Features of Curing Plastics Based on Thermosetting Binders
p. 549 abstract
Development of a Fire-Resistant Polyvinyl-Chloride Coating for the Production of Fire Curtains
p. 552 abstract
Urea–Melamine Formaldehyde Resin for the Manufacture of Water-Resistant Plywood
p. 557 abstract
The Influence of Technological Conditions for Forming Adhesive Primer on Coating Properties As Well As the Strength of Adhesive Joints Made with the Use of Adhesive Primer
p. 562 abstract
Flame Retardants for Slow-Burning and Fire-Resistant Polymer-Composite Materials
p. 568 abstract
Analyzing the Destruction of a Carbon-Fiber-Reinforced Polymer during the Pushout of a Multifilamentary Cylinder
p. 574 abstract
The Influence of Association of Reagents on the Polycondensation of Epichlorhydrin and 1,3-Bis(dimethylamino)propanol-2 in Water
p. 581 abstract
Simulation of the Durability of Adhesive Joints during Operation of Rubber—Metallic Products
p. 586 abstract
Thermal-Recycling Technology of Waste from Small Wholesale Production of Multicomponent Materials and Adhesive Compositions
p. 590 abstract
Noncatalytic Oligomerization of Cyane Ether in the Presence of Epoxy Resin
p. 595 abstract
Dielectric Characteristics of Syntactic Foams Based on Viksint K-18 Sealant in the Centimeter Microwave Range
p. 603 abstract
A Polyelectrolyte Sealant for Fuel Cells Based on Grafted Fluorcopolymers
p. 608 abstract
Domestic Conductive Adhesives, Test Methods, Properties, and Application. A Review
p. 613 abstract
Durability of Adhesive Bonds under Extreme Operating Conditions
p. 619 abstract
Properties of Polysulfide Sealants against the Action of Aggressive Environments
p. 623 abstract
The Influence of Mixing Conditions on the Morphology of Poly-3-hydroxybutyrate and Nitrile-Butadiene Rubber Polymer Compositions
p. 628 abstract
Thermal and Mesomorphic Properties of Aromatic Oligoesters Based on 4-Hydroxybenzoic Acid
p. 633 abstract
Extrusion Processing of Polypropylene/Ethylene–Octene Copolymer Recycled Composite Material
p. 638 abstract
Evaluation of the Moisture Resistance of Products Manufactured Using Various 3D-Printing Modes
p. 644 abstract
The Effect of Copper Coating on the Properties of Carbon-Fiber-Reinforced Plastics
p. 648 abstract
A Vibroacoustic Method for Diagnosing the Influence of Impulse Load on Fiberglass Pipes
p. 652 abstract
Physicomechanical Properties of a Unidirectional Organoplast Based on Rusar-NT Aramid Fibers
p. 658 abstract
The Research of the Influence of the Parameters of 3D Printing on the Strength Characteristics of Plastic Products
p. 663 abstract
Membrane Purification of Depleted Emulsions by Polymer Membranes (Brief Literature Review)
p. 667 abstract
Carbon Plastics in the Design of Space-Technology Products (Review)
p. 678 abstract
Plant Fibers and the Application of Polymer-Composite Materials Based on Them: A Review
p. 685 abstract
The Influence of Synthesis Modes on the Structure and Properties of Polyethylene Samples Produced by FDM Printing
p. 692 abstract
Studying the Interrelation between the Rigidity of a Complex Material of Natural Origin and Its Structural Characteristics
p. 697 abstract
The Rheological Behavior of Powder–Polymer Blends and Model Description of Feedstock Viscosity for Numerical Simulation of the Injection Molding Process
p. 701 abstract
Possibilities of Rheology in the Study of Binders for PCMs
p. 709 abstract
Hybrid Polyurethane–Inorganic Thermal Insulation: Fire Hazard and Thermo-Oxidative Decomposition
p. 715 abstract
The Effect of Storage Conditions on Physical Properties of Mammoth Tusks
p. 724 abstract
Biodegradable Materials Based on Low-Density Polyethylene, Starch, and Monoglycerides
p. 729 abstract
The Structure and Properties of Bioresorbable Polylactide-Based Materials for Regenerative Medicine
p. 734 abstract