Contents

Polymer Science, Series D

---

Vol. 14, No. 4, 2021

---

Phenol–Formaldehyde Oligomers Modified with Carbon Nanoparticles and Their Use in Adhesives and Prepregs

I. I. Nikonova, V. F. Shkodich, N. E. Temnikova, M. V. Kolpakova and O. V. Stoyanov p. 471  abstract

Estimation of Interface Strength at Adhesion of Polymers to Fibers with a Rough Surface

A. Ya. Gorenberg, Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva p. 477  abstract

Optimization of Properties of Epoxy Binders during Their Modification

E. V. Kupriyanova, V. S. Osipchik, T. P. Kravchenko, A. N. Pachina and T. V. Morozova p. 483  abstract

Prospects for the Use of Impregnation Compounds for Maintenance of Suspension Elements of Road Vehicles under Different Temperature Conditions

I. G. Marenkov and N. I. Baurova p. 489  abstract

On the Results of Application of Correlation Analysis during the Investigation of the Structure and Properties of Butadiene–Styrene Thermoplastic Elastomers

L. R. Lyusova, Yu. A. Naumova and S. V. Kotova p. 493  abstract

A Study of Elastomeric Fire- and Heat-Resistant Materials Containing Functionally Active Structures

V. F. Kablov, N. A. Keibal, O. M. Novopol’tseva, V. G. Kochetkov and Yu. M. Antonov p. 499  abstract

Application of Polybutadiene–Poly(Tetramethylene Oxide) Block Copolymers to Modify Adhesive Compositions

I. P. Storozhuk, N. G. Pavlyukovich, A. L. Kotyukova and A. V. Polezhaev p. 504  abstract

A Study of the Properties of Melamine–Carbamide–Formaldehyde Resins Modified with Lignosulphonates

E. G. Sokolova, D. S. Rusakov, A. N. Chubinsky, G. S. Varankina and S. A. Ugryumov p. 508  abstract

Carbon Plastic Binders Based on Epoxy Oligomers Modified by Thermoplast

S. S. Malakhovsky, N. V. Kostromina, Yu. V. Olikhova, T. P. Kravchenko and I. Yu. Gorbunova p. 513  abstract

A Method for Calculating the Parameters of a Unit for Thermoradiation Treatment of Polymer Coatings in the Restoration of Car Body Parts

R. I. Li, Yu. N. Rizaeva, D. N. Psarev, A. N. Bykonya and M. R. Kiba p. 517  abstract

Adhesion Interaction and Adhesion Mechanics. Theory and Its Application

R. A. Turusov p. 522  abstract

Studies of Urethane Sealants Using the Penetration Method

S. N. Gladkikh, S. E. Loginova, E. A. Kurilova and N. V. Nikonova p. 532  abstract

The Chemical Resistance of Adhesive Bonds Based on Epoxy Urethan Oligomers Synthesized Using Different Diisocyanates

A. V. Savchuk, A. I. Slobodinyuk, D. G. Slobodinyuk and E. V. Pogorel’tsev p. 537  abstract

Technological Support of Gluing Quality when Repairing Products

V. A. Skryabin p. 540  abstract

The Strength of Weld-Bonded Joints upon Long-Term Action of Negative Temperatures

A. Yu. Konoplin and N. I. Baurova p. 543  abstract

Binders Based on Mixtures of Epoxy Polymers and Thermoelastoplasts. Part 1. Relaxation Properties of Epoxy Polymers Modified by Polybutadieneterephtalate–Polytetramethyleneoxide Block Copolymers

Yu. S. Kochergin, T. I. Hryhorenko and Wu Yiqi p. 547  abstract

Assessment of the Resistance of the Paint and Varnish Coatings on Parts Made of Polymer Composite Materials to the Action of Ultraviolet Radiation

V. K. Kol’dyushov and N. I. Baurova p. 553  abstract

A Study of the Mechanism of Synergic Improvement in the Lubricating Properties of Oligoorganosiloxane Compositions with Organic Media to Expand the Field of Application of Organosilicon Liquids

P. A. Storozhenko, I. Yu. Levento, K. S. Piminova, A. I. Drachev and T. A. Koshkina p. 558  abstract

Polymer Composite Materials and Gels with Arabinogalactan

S. Z. Rogovina, E. L. Akim, S. A. Dubrovskii and A. A. Berlin p. 563  abstract

Rubber and Rubber–Polymer Modifiers of Asphalt Concrete Mixes Prepared by High-Temperature Shear Grinding. Part 2. Methodology of Evaluation of Performance of Modifiers

A. A. Berlin, V. G. Nikol’skii, I. A. Krasotkina, T. V. Dudareva, V. N. Gorbatova, A. V. Sorokin, V. A. Lobachev, S. I. Dubina and M. Yu. Sinkevich p. 568  abstract

Synthesis and Antibacterial Activity of Cellulose Modified with Ciprofloxacin Fragments

S. V. Bukharov, Yu. M. Sadykova, T. E. Umarov, A. R. Burilov, G. N. Nugumanova, K. S. Momzyakova, A. D. Voloshina and T. R. Deberdeev p. 575  abstract

Chemically Modified Polysulfones and Their Properties

I. P. Storozhuk, V. M. Alekseev, A. N. Kalinnikov and A. S. Borodulin p. 580  abstract

Investigation of the Rheokinetics of Curing and Properties of an Epoxyurethane Thermal-Protective Coating

O. I. Sidorov, V. A. Pil’chenko, N. I. Sidorova, T. V. Bochkova, V. I. Elizarov and E. V. Bodrikhin p. 588  abstract

Oxobiodegradable Polymer Materials (Review)

Yu. K. Lukanina and A. A. Popov p. 594  abstract

Thermomechanical Properties of Composites Based on High-Density Polyethylene and Aluminum

Kh. V. Allahverdiyeva, N. T. Kakhramanov and U. V. Namazly p. 598  abstract

Methods of Carbon Sequestration (Review)

A. A. Baurov p. 603  abstract

---