Contents

Polymer Science, Series D

---

Vol. 11, No. 4, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Polymer Science, Series D ISSN 1995-4212.

---

A Thermoplastic Glue Based on Polyhydroxyether

D. A. Beeva, A. A. Yakokutova, A. A. Beev and V. A. Kvashin p. 349  abstract

Mechanical Properties of Cured Adhesive Binders

A. P. Petrova, N. F. Lukina, D. A. Mel’nikov, K. L. Besednov and B. F. Pavlyuk p. 352  abstract

Adhesive Properties of Insulating Tapes and Wrappers

A. E. Chalykh, T. F. Petrova, A. A. Shcherbina and S. A. Nenakhov p. 355  abstract

Hot-Melt Sealants of Curable Type Based on Butyl Rubber and Ethylene–Vinyl Acetate Copolymer

M. S. Lisanevich, R. Yu. Galimzyanova, S. N. Rusanova, Yu. N. Khakimullin and O. V. Stoyanov p. 359  abstract

General Structural Parameters and Rheological Properties of Disperse-Filled Epoxy Oligomers with Inactive Solvent

I. D. Simonov-Emel’yanov, A. N. Trofimov, V. I. Sokolov, A. Yu. Zarubina, S. I. Shalgunov, A. V. Sinegaeva and D. A. Trofimov p. 363  abstract

Comparative Analysis of Surface and Thermal Properties of Oil—Polymer Resins

R. A. Perelygina, I. A. Starostina, A. R. Efimova and O. V. Stoyanov p. 369  abstract

Properties of Lightweight Structural Glued Plywood

S. A. Ugryumov p. 374  abstract

A Study of the Performance Properties of Glued Beams

S. A. Ugryumov, S. V. Kuklin, E. A. Minina and N. S. Paklyuseva p. 378  abstract

Model of the Contact Stresses and Endurance of Metal–Polymer Roller Bearings

R. I. Li and A. V. Mironenko p. 382  abstract

Analysis of Curing Rates of Adhesive Compositions Based on Methyl Methacrylate or Styrene and Macroinitiators, Obtained by Radically Initiated Polymerization with the Participation of Metallocenes

D. A. Shiyan, K. A. Tereshchenko, N. V. Ulitin, A. V. Takhautdinova and S. V. Kolesov p. 387  abstract

A Thermal Protective Compound Elastic at Negative Temperatures

O. I. Sidorov, S. A. Kapustin, A. A. Zhurba, N. I. Sidorova and V. I. Elizarov p. 393  abstract

The Theoretical Study of Kinetics of NdCl₃ · nROH Catalytic Complex Formation for the Process of Obtaining a Low-Molecular Polyisoprene as the Component of Vulcanizing Sealant

K. A. Tereshchenko, N. V. Ulitin, D. A. Shiyan and V. P. Zakharov p. 397  abstract

Microstructural and Fractographic Analysis of Adhesive Compound Based on VK-27 Epoxy Resin and VK-25 Phenol Resin Adhesives

A. I. Gulyaev, A. P. Petrova, D. V. Zaitsev and A. N. Raevskikh p. 401  abstract

Heat-Resistant Polymers and Composites on the Basis of Epoxy–Isocyanate Binding Agents

M. S. Fedoseev, L. F. Derzhavinskaya, I. A. Borisova, T. E. Oshchepkova, V. E. Antipin and R. V. Tsvetkov p. 407  abstract

Viladex Russian Hybrid Silane-Functional Adhesive Sealants with Enhanced Performance Properties

S. E. Loginova, S. N. Gladkikh, E. A. Kurilova, N. V. Nikonova and E. B. Averchenko p. 415  abstract

Trends in Development of Bioresorbable Calcium Phosphate Ceramic Materials for Bone Tissue Engineering

M. A. Goldberg, V. V. Smirnov, A. Yu. Teterina, S. M. Barinov and V. S. Komlev p. 419  abstract

An Impact Assessment of Metallization of a Carbon Tape Surface on the Mechanical Characteristics of the Filaments

V. A. Nelyub p. 423  abstract

Characteristics of Hybrid Mixtures of Boron Polyoxide and Copolymer of Ethylene with Vinyl Acetate

E. V. Stegno, V. M. Lalayan, A. V. Grachev, L. V. Vladimirov, V. A. Nelyub, A. Yu. Shaulov and A. A. Berlin p. 426  abstract

Determination of the Resources of Machine Components Made of Polymeric Composite Materials on the Basis of Cumulative Evidence

V. V. Grib, V. A. Zorin and N. I. Baurova p. 431  abstract

A Testing Procedure for New Materials Used in a Chassis for Compliance with the Requirements of the Formula Student Technical Regulations

K. E. Osadchii and N. I. Baurova p. 436  abstract

Distinctive Features of Surface Preparation for Gluing in Arctic Conditions

A. Yu. Konoplin and N. I. Baurova p. 440  abstract

Complexation of N-Vinylsuccinimide with an Electron-Acceptor Solvent

N. A. Lavrov p. 443  abstract

Composites Based on Cellulose and Chitosan

S. Z. Rogovina, R. Ya. Deberdeev and K. S. Fadeeva p. 448  abstract

The Effect of the Nature of an Apolar Solvent on the Rheological Properties of Protective Compositions

V. I. Vigdorovich and E. D. Tanygina p. 454  abstract

System Analysis of the Stress Intensity Factor for Defect Evaluation in Metal Structures

Yu. V. Kolotilov, Yu. A. Maksimenko, I. Yu. Aleksanyan and A. F. Dorokhov p. 460  abstract

The Effect of Cobalt Ions on Thermooxidation and Photooxidation of Polyethylene Containing Modified Montmorillonite

V. B. Ivanov and E. Yu. Khavina p. 463  abstract

---