Vol. 16, No. 3, 2023

Polymer Science, Series D

Isoquinoline Alkaloids of Amaryllidaceae Crinane Alkaloids

Yu. V. Shklyaev p. 499 abstract

The Effect of the Dispersion and Texture of Filler Particles and Flow Modes on the Rheological Properties of an Oligomer Composition

Yu. G. Tselishchev and V. A. Val’tsifer p. 512 abstract

Sol–Gel Synthesis and Textural–Structural Characteristics of Manganese Oxide: the Effect of Thermal-Modification Temperature

E. V. Saenko p. 518 abstract

Influence of Gamma Radiation on the Strength of ABS Plastic Filled with a Short Carbon Fiber

E. A. Lebedeva, D. K. Trukhinov, E. V. Kornilitsina, S. A. Astaf’eva, E. M. Nurullaev, V. D. Oniskiv and E. Ibragimova p. 522 abstract

Thermal Behavior of Copolymers of Maleimide with Alkyl Methacrylates

M. N. Gorbunova, T. S. Istomina, A. A. Gorbunov and V. N. Strelnikov p. 526 abstract

Polyurethane Elastomers Based on Epoxy-Terminated Oligomers

A. V. Savchuk, V. Yu. Senichev and A. I. Slobodinyuk p. 532 abstract

A New Synthetic Approach to Obtaining 2,4,6-Trisubstituted Pyrimidine and Studying Its Thermal, Optical, Electrochemical, and Electrophysical Properties

D. G. Slobodinyuk, I. V. Lunegov, O. A. Mayorova, E. V. Shklyaeva and G. G. Abashev p. 537 abstract

Synthesis of Betulin Conjugates and Its 1,2,3-Triazole Derivatives

M. A. Nazarov, A. A. Polovnikova and I. A. Tolmacheva p. 543 abstract

Relationship between the Abrasion Resistance of Urethane-Containing Elastomers and Their Structure

V. Yu. Senichev and E. V. Pogoreltsev p. 549 abstract

Determination of Temperature–Time Intervals for the Formation of Carbon Mesophase for Some Types of Coking Feedstock

K. A. Shubin, A. L. Abaturov and D. M. Kisel’kov p. 553 abstract

Synthesis and Properties of AgI–SiO₂ Precipitate-Reforming Reagents Based on SBA-15 Mesoporous Silicon-Oxide Matrix

A. S. Averkina, N. B. Kondrashova, E. V. Saenko and V. A. Val’tsifer p. 558 abstract

Preparation of Mesoporous Magnetite—Titanium-Dioxide Composites under Hydrothermal and Ultrasonic Treatment

I. I. Lebedeva and K. O. Ukhin p. 563 abstract

A Study of the Solubility and Extraction Capacity of Systems Based on Mixtures of Neonols AF 9-6 and AF 9-12

D. O. Shilykovskaya, S. A. Denisova and A. M. Yelokhov p. 567 abstract

The Influence of Functional Additives on the Mechanical Properties of ABS Plastic

E. V. Kornilitsina, E. A. Lebedeva, D. K. Trukhinov, S. A. Astaf’eva and M. Balashoyu p. 572 abstract

Structure and Properties of Urethane-Containing Elastomers Based on Adipic Acid Polyester and Ethylene Glycol, Isophorone Disocyanate, and Aromatic Diamine

A. I. Slobodinyuk, V. Yu. Senichev, M. V. Perepada, V. N. Strelnikov, A. A. Belov, S. S. Kozlov, A. V. Savchuk and D. G. Slobodinyuk p. 576 abstract

Modifying Silicone Material to Make Products for Medical Purposes

V. A. Valtsifer, N. B. Astashina, M. A. Savastyanova, D. I. Polyakov and A. M. Bampi p. 582 abstract

Drinking-Water-Treatment Wastes as Sorption Materials for Purifying Aqueous Environments from Pollution. Part 1. Iron-Containing Water-Treatment Sludge. A Review

I. G. Shaikhiev, I. N. Shumkova, T. R. Deberdeev and S. V. Sverguzova p. 589 abstract

Drinking-Water-Treatment Wastes as Sorption Materials for Purifying Aqueous Environments from Pollution. Part 2. Aluminum-Containing Water-Treatment Sludge. A Review

I. G. Shaikhiev, I. N. Shumkova, T. R. Deberdeev and S. V. Sverguzova p. 599 abstract

Development of Methods for Testing Polymer Materials for Microbiological Resistance. Review

V. O. Startsev, A. A. Krivushina and T. V. Mineeva p. 609 abstract

The Effect of Iron Powders on the Radio Engineering Characteristics of Radio-Absorbent Materials

A. E. Sorokin, A. P. Petrova, V. A. Sagomonova and I. D. Kraev p. 616 abstract

The Use of Local Mineral Raw Materials of Yakutia for the Manufacture of High-Strength Concrete

O. N. Burenina, A. V. Andreeva and M. E. Savvinova p. 622 abstract

Combustion Products of Polymer Waste as a Source of Environmental Pollution

I. Yu. Isaeva, I. V. Odinokova, G. Yu. Ostaeva and E. A. Eliseeva p. 627 abstract

Creation of a Water-Resistant Electrical Insulation on the Basis of Woven-Glass Tapes and Fiberglass Fabrics

A. A. Panov, A. L. Panin, A. V. Patsino, N. Yu. Lysov, A. V. Polyudchenkov, T. V. Panina and V. I. Zhun’ p. 631 abstract

Influence of Relative Air Humidity on the Abrasion Resistance of Polyurethane Ureas with Different Hard Segment Content in a Polymer Chain

V. Yu. Senichev, E. V. Pogoreltsev and A. I. Slobodinyuk p. 636 abstract

Methods for the Manufacture of Layered Reinforced Vibration-Absorbing Materials Based on Thermoplastic Polyurethane and Metal

V. A. Sagomonova, A. E. Sorokin, A. P. Petrova, V. V. Tselikin and T. Yu. Tyumeneva p. 641 abstract

Prospects for the Use of Secondary Nonwoven Materials as a Reinforcing Filler for Composites in Mechanical Engineering

A. G. Timofeeva and N. I. Baurova p. 648 abstract

Using Rye (Secale Cereale) Processing Wastes as Sorption Materials for Removing Pollutants from Aquatic Environments

I. G. Shaikhiev, S. V. Sverguzova, K. I. Shaikhieva and T. R. Deberdeev p. 651 abstract

On Topological Order and Disorder in Solids and Liquids

M. I. Sidorov, M. E. Stavrovskii, I. N. Kravchenko, I. M. Sidorov and S. K. Toigambaev p. 657 abstract

Synthesis of Barium Tungstate in Melts of the System (Li₂WO₄–Na₂WO₄)_eut–Ba(NO₃)₂(Li,Na,Ba//NO₃,WO₄)

Z. A. Cherkesov and A. M. Kharaev p. 662 abstract

An Evaluation of the Influence of Storage Conditions for Dispersed and Fibrous Fillers on the Properties of Composites Based on Them

A. A. Volchenkova, E. A. Galkina and N. I. Baurova p. 668 abstract

Determination of the Maximum Permissible Friction Modes of Ultra-High-Molecular-Weight Polyethylene and Polymer-Composite Materials Based on It Modified on Carbon Fibers

O. V. Gogoleva, P. N. Petrova and E. S. Kolesova p. 672 abstract

The Influence of Carding Polysulfone on Viscoelastic Properties of Epoxide Polymers

S. V. Polunin, I. Yu. Gorbunova, M. L. Kerber, I. A. Kryuchkov, P. A. Morozova and T. P. Kravchenko p. 678 abstract

Evaluation of the Durability of Limited Swelling Rubber Filled with Modified Powdered Cellulose from Cotton Waste

E. N. Cherezova, Yu. S. Karaseva and A. M. Nakyp p. 681 abstract

Change in the Properties of BSR-3M Binder in VKU-46 Carbon-Fiber-Reinforced Polymer after Prolonged Climatic Aging

T. V. Koval’, I. M. Veligodskii and A. A. Gromova p. 687 abstract

Technology of Automated Application of Glue on Film Scale

T. V. Buevich, A. G. Kirillov and V. N. Sakevich p. 694 abstract

Justification of Veneer Gluing Modes in the Production of Plywood with Increased Water Resistance

E. G. Sokolova p. 701 abstract

A Study of the Baking Rheokinetics and Properties of a Thermal Protective Coating Based on Polyether Urethane Rubber with End Epoxy Urethane Groups and Melamine Polyphosphate

O. I. Sidorov, V. A. Pilchenko, A. V. Kislyakova, T. V. Bochkova, V. I. Elizarov, L. A. Davydova and D. V. Pleshakov p. 706 abstract

The Influence of Composition and Size of Gravel Filler Composite with Epoxy Basis on Its Abrasive Wear

A. M. Mikhalchenkov, S. A. Feskov, A. A. Osipov and A. S. Kononenko p. 714 abstract

Properties and Functionality of VK-100 Conductive Adhesive

N. F. Lukina, K. L. Besednov, E. V. Kotova and A. Yu. Isaev p. 718 abstract

A Sealant Based on SKTN-A Low-Molecular-Weight Dimethylsiloxane Rubber Modified by Boron Nitride

V. Yu. Chukhlanov, O. G. Selivanov and N. V. Chukhlanova p. 725 abstract

Theoretical Substantiation of the Use of Natural Mineral Modifiers for Synthetic Resins

G. S. Varankina, D. S. Rusakov and S. G. Partenadze p. 730 abstract

Synthesis of a Polyurethane Hot-Melt Adhesive Based on Hydroxypropylated Diphenylolpropane and Properties of Adhesive Joints Based on It

I. N. Bakirova and V. A. Burylina p. 736 abstract

The Effect of Vacuum Ion–Plasma Treatment on the Strength of an Adhesive Joint

E. D. Kolpachkov, O. I. Smirnov, E. V. Kurshev and I. A. Volkov p. 742 abstract

Criteria for the Operational and Economic Estimation of the Efficiency of Epoxy–Sand Composites of Different Compositions as Abrasive-Resistant Coatings of Parts of Tillow-Tool Implements

A. M. Mikhalchenkov, V. E. Torikov, M. A. Mikhalchenkova and N. D. Ulyanova p. 746 abstract

Complex Thermoanalytical Studies of K-800 Organosilicon Adhesive

Yu. M. Kozhevnikova, I. G. Tolmacheva, V. N. Borisov, O. N. Zaikovskaya, R. R. Iskhuzhin, A. F. Agafonova and I. A. Belobrova p. 751 abstract

Properties of Wood-Fiber Board Manufactured with the Use of UFC-FF Modified Urea–Formaldehyde Resin

Yu. V. Pasko and O. P. Machneva p. 758 abstract

Substantiation of Main Wastewater-Treatment Directions in the Production of Adhesive Compounds and Polymer-Containing Composites

K. A. Taraskin, D. S. Orlov, S. V. Lebedev, Yu. N. Kanshina and E. V. Surkov p. 762 abstract

Technological and Performance Characteristics of an Epoxy Binder Treated by Prepreg Technology with a Hardening Temperature below 140°C

A. I. Tkachuk, Ya. M. Gurevich, K. N. Moskvitina and M. A. Guseva p. 771 abstract

Modern Phenolic Adhesives for Aviation and Engineering. Part 1. The Effect of Modifying Additives

D. A. Aronovich and A. P. Petrova p. 777 abstract

Use of Lactam-Containing Plastisols from Halogenated Polymers for Improving the Strength of Adhesion between an Ethylene–Propylene Elastomer Composite and a Metal

A. F. Puchkov, M. P. Spiridonova and S. D. Kosobokova p. 793 abstract

Contents

Polymer Science, Series D