Vol. 15, No. 3, 2022

Polymer Science, Series D

Studies of the Structure and Properties of Adhesive Composites Based on Silicone Sealant, Methacrylate Glue, and Compositions There of as Binders in the Technology of Flexible Conductors

N. V. Borisova and E. V. Bychkova p. 317 abstract

A Study of Curing Regularities and Properties of an Adhesion-Active Epoxy Urethane Heat-Protective Coating

O. I. Sidorov, V. A. Pil’chenko, N. I. Sidorova, T. V. Bochkova and M. I. Buzin p. 322 abstract

Binders Based on Mixtures of Epoxy Polymers and Thermoelastoplasts. Part 4. Relaxation Properties of Epoxy Polymers Modified with Polysulfone–Polydimethylsiloxane–Polysulfone Block Copolymers

Yu. S. Kochergin, T. Hryhorenko and Wu Yiqi p. 330 abstract

Application of Adhesives in the Composition of Vibration-Absorbing Materials

V. A. Sagomonova, A. E. Sorokin, T. Yu. Tyumeneva, A. P. Petrova and A. Yu. Isaev p. 336 abstract

The Effect of Paper Type on the Impregnation and Lamination of Wooden Boards

V. E. Tsvetkov, A. E. Anokhin, M. Yu. Ekimova and O. P. Machneva p. 342 abstract

Interphase Interactions in Adhesive Compositions with Adjustable Thermal Conductivity

O. I. Loban, N. V. Kostromina, Yu. V. Olikhova, I. Yu. Gorbunova and V. V. Khammatova p. 349 abstract

Current State of the Problem of Adhesive Interaction Estimation Using Thermodynamic Characteristics

I. A. Starostina, N. V. Ulitin and O. V. Stoyanov p. 354 abstract

Thermoplastic-Based Binders for Polymer-Composite Materials (Literature Review)

A. E. Sorokin, V. A. Sagomonova, A. P. Petrova and L. V. Solov’yanchik p. 359 abstract

The Influence of Processing by DC Discharge on Contact and Adhesive Properties of Poketone

M. S. Piskarev, M. V. Shabunina, A. S. Kechek’yan, A. V. Zinoviev, A. B. Gilman and A. A. Kuznetsov p. 366 abstract

Studies on Internal Stresses within Glue Joints in Glued Wooden Structures

G. S. Varankina and D. S. Rusakov p. 370 abstract

A Study of the Properties of Polymer Coatings Based on an Organosilicon Material

V. V. Kartashova and N. I. Baurova p. 374 abstract

Nonhardening Sealants Based on Modified Nitrile Butadiene Rubber

A. R. Akhmedgoraeva, A. A. Sultanov, R. Yu. Galimzyanova and Yu. N. Khakimullin p. 379 abstract

Deformation Properties of Elastic Adhesive in Adhesive Joints under Quasi-Static Low-Cycle Mechanical Loads

V. G. Tsverava, M. Yu. Rusin, A. V. Terekhin, D. V. Alekseev and P. Yu. Yakushkin p. 384 abstract

The Influence of Silver Powder Filler on the Curing Process and Structure of Conducting Adhesives

A. I. Gulyaev, K. L. Besednov, A. P. Petrova and N. V. Antyufeeva p. 389 abstract

Optimizing an EDI Epoxy Binder Using the Pareto Method

E. V. Atyasova, V. V. Samoilenko, A. N. Blaznov, V. V. Firsov and Z. G. Sakoshev p. 394 abstract

Glued Floor Coverings Based on Wooden End Blocks

A. R. Birman, S. A. Ugryumov, A. A. Tambi, F. V. Svoykin and V. F. Svoykin p. 400 abstract

Fungal Resistance of Thiokol Sealants to Tropical Microorganisms and Test Cultures. Part 2

A. A. Krivushina, T. V. Bobyreva and D. N. Smirnov p. 404 abstract

Preparation and Study of the Properties of Biodegradable Keratin-Containing Compositions

R. S. Smykovskaya, O. P. Kuznetsova, T. I. Medintseva, A. V. Kireynov, V. G. Volik, E. V. Prut and A. A. Berlin p. 409 abstract

A Study of the Influence of Solar Radiation on the Structure of Carbon-Fiber-Reinforced Plastic

Tszya Chzhenyuan, A. L. Galinovskii, A. S. Provatorov, S. A. Eremin and M. I. Abashin p. 416 abstract

Silicon Polyaddition Composite Materials for Different Industries

E. I. Alexeeva, A. R. Dolotko, A. A. Malakhov, I. Yu. Ruscol, E. V. Sokolyuk and P. A. Storozhenko p. 423 abstract

An Evaluation of the Resistance of Parts Made of ABS Plastic with the Capacity for Biodegradation to the Effects of Operating Environments

B. M. Archakov, R. L. Sakhapov, N. I. Baurova and V. A. Zorin p. 427 abstract

Evaluation of the Paper-Making Properties of Cellulose Extracted from Oat and Alfalfa Straw

K. S. Momzyakova, M. A. Pulyaeva, Ya. V. Kazakov, T. R. Deberdeev, A. V. Kanarskii, A. A. Aleksandrov and R. Ya. Deberdeev p. 431 abstract

A New Biocompatible Release Material Based on Branched Polyvinyl Alcohol

S. V. Osadchenko, M. V. Sten’kina, Ya. O. Mezhuev and M. I. Shtil’man p. 436 abstract

A Fixing Composition Based on a Synthetic Divinyl Rubber with Terminal Carboxyl Groups and an Epoxy Oligomer with Enhanced Specific Functionality

O. I. Sidorov, N. E. Evseev, D. A. Belyakov, L. A. Davydova, S. N. Vetrov, D. V. Pleshakov and M. I. Buzin p. 441 abstract

Hydrolysis of Biodegradable Fibrous and Film Materials Based on Polylactide and Poly(3-hydroxybutyrate) Polyesters and Their Compositions with Chitosan

S. Z. Rogovina, L. A. Zhorina, A. A. Olkhov, A. R. Yakhina, E. L. Kucherenko, A. L. Iordanskiy and A. A. Berlin p. 447 abstract

Prospects of Applying the Neural-Network Modeling for Estimating the Structure and Properties of Polymer-Composite Materials with Hybrid Matrices

E. A. Kosenko, A. V. Ostroukh and N. I. Baurova p. 452 abstract

The Composition and Some Properties of Epoxy Oligomers Based on Hexachlorocyclotriphosphazene and Diphenylolpropane

I. S. Sirotin, Vu Xuan Son, E. A. Gorbunova, R. S. Borisov, Yu. V. Bilichenko, T. I. Kuznetsova and V. V. Kireev p. 457 abstract

The Influence of the Medium Polarity on the Molecular Weight of Poly-2-hydroxyethyl Methacrylate

N. A. Lavrov p. 464 abstract

Development of a Fast-Acting Locking Device for Gas-Distribution Systems from an Elastic Polymer Material

S. V. Kitaev, Yu. V. Kolotilov and I. V. Gladkov p. 467 abstract

General Regularities and Features of Photodegradation of Polyphenylene Sulfide Modified by Ethylene and Glycidyl–Methacrylate Copolymer

V. B. Ivanov, E. V. Solina and S. V. Usachev p. 472 abstract

Determination of the Variation in Thickness of Freely Molded Products of Asymmetric Shape

S. I. Antonov, A. E. Sheryshev and M. A. Sheryshev p. 479 abstract

The Influence of Various Oligoether Additives on the Formation of Physical and Mechanical Properties of Polysulfone

A. M. Kharaev, R. Ch. Bazheva, Z. L. Beslaneeva, M. K. Vindizheva and R. K. Sabanova p. 484 abstract

Contents

Polymer Science, Series D