Contents

Polymer Science, Series D

Vol. 14, No. 3, 2021

The Effect of Adhesive Additives on the Properties of Uncured Sealants Based on Butyl Rubber

R. Yu. Galimzyanova, M. S. Lisanevich and Yu. N. Khakimullin p. 319  abstract

Adhesives for High-Temperature Tensometry

N. F. Lukina, A. P. Petrova, E. V. Kotova and A. Yu. Isaev p. 323  abstract

Synthesis of Cardanol-Containing Resols for Producing Phenolic Films: Protective Coatings for Wood Composites

O. F. Shishlov, N. S. Baulina, V. V. Glukhikh, O. S. El’tsov, Yu. M. Shafran, V. G. Buryndin and O. V. Stoyanov p. 328  abstract

Evaluation of Frost Resistance of Organosilicon Sealant at Ultralow Temperatures

A. Yu. Konoplin, A. V. Pushkarev, A. V. Shakurov and N. I. Baurova p. 335  abstract

Integrated Evaluation of Quality of Adhesive–Mechanical Joints

A. Yu. Konoplin and N. I. Baurova p. 340  abstract

Estimating Loading Capacity in Fit-Pressed Adhesive Joints

M. A. Lyubchenko, O. A. Ryakhovskii, A. N. Vorob’ev and G. V. Malysheva p. 345  abstract

Solvents for Sealing Microfluidic Devices Made of Polymethyl Methacrylate by Chemical Solvent Bonding

T. A. Lukashenko, A. N. Zubik, A. L. Bulyanitsa, A. I. Tsymbalov and A. A. Evstrapov p. 350  abstract

An Approach to Improving the Efficiency of Assembly of Wood Laths

A. R. Birman, N. A. Belonogova, A. S. Krivonogova, S. A. Ugryumov and A. A. Tambi p. 356  abstract

Some Adhesion and Physicomechanical Properties of Blends of Polyethylene with Polar Copolymers

S. N. Rusanova, S. Yu. Sof’ina, A. R. Khuzakhanov, I. A. Starostina and O. V. Stoyanov p. 360  abstract

The Effect of Finishing Carbon Microfibers on Fire–Heat Resistant and Adhesion Properties of Elastomeric Materials

V. F. Kablov, N. A. Keibal, A. O. Motchenko and Yu. M. Antonov p. 366  abstract

An Electron Microscopy Study of the Kinetics of the Destruction of Polymer–Fiber Adhesion Joints

A. Ya. Gorenberg, Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva p. 370  abstract

A Mathematical Model of Thermal Irradiation Processing of Polymer Coatings during Restoration of Automobile Body Parts

R. I. Li, D. N. Psarev, A. N. Bykonya and M. R. Kiba p. 376  abstract

Comparison of the Behavior of Adhesive Joints Performed by Phenolic-Rubber and Epoxy-Film Adhesives at Simultaneous Exposure of Loads and Climatic Factors

A. P. Petrova, N. F. Lukina and A. Yu. Isaev p. 381  abstract

Thermophysical Characteristics of Multicomponent Pastes for Application of Hardening Coatings

N. V. Titov, A. V. Kolomeichenko, V. L. Basinyuk and I. N. Kravchenko p. 387  abstract

Relationship of Molecular-Mass Characteristics of Polyisoprene, Component of Vulcanized Sealant, with Particle Sizes of Catalytic System TiCl4–Al(i-C4H9)3 in Isoprene Polymerization

G. M. Ganiev, K. A. Tereshchenko, D. A. Shiyan, A. S. Ziganshina, V. P. Zakharov and N. V. Ulitin p. 392  abstract

Achievements in the Field of Initiating Systems for Curing Anaerobic Adhesives

D. A. Aronovich p. 396  abstract

Studies of the Adhesion Properties of Adhesive Butt Joints of a Conveyer Belt

V. A. Skryabin p. 401  abstract

Technology of Low-Toxicity and Water-Resistant Wood Chipboard on a Modified Phenolic Binder

Yu. V. Pas’ko, O. P. Machneva and V. A. Voityuk p. 404  abstract

Nanomodification of Concretes by Suspensions Processed by Ultrajet Technology

A. L. Galinovskii, S. V. Bochkarev, L. V. Sudnik, Kyaw Myo Htet and A. I. Plokhikh p. 408  abstract

Durability Characterization of Joints of Plastic Products Exposed to Negative Temperatures Fabricated Using Additive Technologies

I. S. Nefelov and N. I. Baurova p. 413  abstract

Prediction of the Biological Activity of N-Vinyl Compounds and Polymers Based on Them

N. A. Lavrov and K. O. Samoilova p. 417  abstract

Rubber and Rubber–Polymer Modifiers of Asphalt Concrete Prepared by High-Temperature Shear Grinding. Part 1. Problems of Evaluation of Performance of Modifiers Introduced to Asphalt Concrete Mixes According to the Russian Dry Process

A. A. Berlin, V. G. Nikol’skii, I. A. Krasotkina, T. V. Dudareva, A. V. Sorokin, V. A. Lobachev, S. I. Dubina and M. Yu. Sinkevich p. 421  abstract

The Application of Polyaniline and Polypyrrole in Medical and Biological Fields. Part 2. Tissue Engineering, Muscle Simulation, and Systems with Controlled Release of Biologically Active Substances

Ya. O. Mezhuev, M. I. Shtil’man and A. A. Artyukhov p. 427  abstract

Theoretical Aspects of Mechanochemical Synthesis of Dynamically Vulcanized Nanocomposites Based on Thermoplastic Elastomers

N. T. Kakhramanov and A. D. Guliev p. 432  abstract

Comparative Light Transmission and Light Resistance of Multilayered Polymer Films for Flexible Packaging Production

V. N. Serova and B. A. Andryashin p. 438  abstract

Natural Polysaccharide Arabinogalactan in Composite Materials

S. Z. Rogovina, E. L. Akim and A. A. Berlin p. 441  abstract

Abrasion of Thermoplastic Polyurethanes for Elastic Tanks Intended for Temporary Fuel Storage

A. A. Kolesnikov, A. V. Dedov, Yu. N. Rybakov, R. I. Kyunnap and V. G. Nazarov p. 446  abstract

The Effect of Plasma Radiation Treatment of Carbon Fibers on Their Physical and Mechanical Characteristics

V. A. Nelyub and T. D. Tarabrina p. 450  abstract

Estimation of the Possibility of Extension of the Potential of the Method of Ultrajet Diagnostics of Composite Materials

A. L. Galinovskii, A. Papich, S. A. Erokhin, D. I. Galkin, B. B. Morozov and A. A. Barzov p. 456  abstract

Graded Recycled Polymers Modified by Thermoelastoplasts: Composite Materials to Be Used for Injection Molding

V. V. Myasoedova p. 462  abstract

The Influence of Fillers on Abrasive Wear of Segmented Polyurethane Urea

V. Yu. Senichev, E. V. Pogorel’tsev, M. A. Makarova and A. I. Slobodinyuk p. 467  abstract