Vol. 12, No. 3, 2019

Polymer Science, Series D

The Effect of the Mechanical Activation of Silicate Nature Fillers on the Properties of Styrene–Acrylic Polymer Coatings

V. F. Stroganov and M. O. Amel’chenko p. 227 abstract

The Influence of the Structure of Tertiary Amines on Low-Temperature Curing of a Highly Filled Acrylic Composite Initiated with Benzoyl Peroxide

V. P. Rybalko, E. I. Pisarenko, P. B. D’yachenko, S. A. Timerkhanov, A. A. Palamarchuk and A. S. Korchmarek p. 231 abstract

Curing Kinetics of Epoxy–Novolak Binders Modified by DEG-1

K. M. Marakhovskii, V. S. Osipchik, D. N. Panova, E. A. Gorshkova, L. S. Bichevii and P. A. Povernov p. 236 abstract

Effect of Experimental Conditions and Methods for Processing DTA and DSC Results on Reliability of Kinetic Calculations of Parameters of Curing Thermoset Prepregs

V. M. Aleksashin, N. V. Antyufeeva, V. A. Bol’shakov and S. I. Voinov p. 240 abstract

The Structure of the Spot Weld and Weld-Affected Zone in a Weld-Bonded Joint

A. Yu. Konoplin and N. I. Baurova p. 247 abstract

A Modified Glue for Producing Particle Boards and Boards Based on Waste of Annual Plants

S. A. Ugryumov, G. S. Varankina, A. N. Chubinskii and V. A. Katsadze p. 251 abstract

Effects of Surface Preparation Techniques for Bonding of Aluminum Foil on Strength of Adhesive Joints in Honeycomb Structures

I. A. Kozlov, M. A. Fomina, I. A. Volkov and A. P. Petrova p. 254 abstract

A Polymeric Nanocomposite for Fixing Bearings during Assembly and Repair of Equipment

R. I. Li, D. N. Psarev and V. A. Malyugin p. 261 abstract

Investigation of Urethane Sealants by Methods of Thermal Analysis

S. N. Gladkikh, S. E. Loginova, M. Yu. Kladov and M. A. Belinskii p. 266 abstract

Thermophysical and Mechanical Properties of PVC and Molybdenum Compounds

T. A. Borukaev, R. A. Shetov, A. Kh. Shaov and A. M. Kharaev p. 273 abstract

Evaluation of the Operational Properties of the Adhesive–Melts Used during Repair of the Cooling Systems of Road-Building Machines

N. V. Lapina and N. I. Baurova p. 278 abstract

A Technology for Producing Low-Toxicity Phenol–Formaldehyde Resins

Yu. V. Pas’ko and O. P. Machneva p. 283 abstract

Resilience of Adhesive Compounds in Water–Salt Media

A. A. Panov, A. V. Patsino, V. A. Maslov, A. L. Panin, A. V. Polyudchenkov, V. N. Antonov and V. I. Zhun’ p. 286 abstract

Modern Achievements in the Field of Cyanoacrylate Adhesives. Mechanisms of Polymerization of Cyanoacrylates and Their Application Value

D. A. Aronovich p. 290 abstract

An Investigation of the Kinetics of the Heating Process for Parts Made of Carbon Fiber in the Process of Curing

Chen’ Yanyan, V. A. Nelyub and G. V. Malysheva p. 296 abstract

Mechanical Properties and Biodegradability of Polylactide–Polysaccharide Compositions

S. Z. Rogovina, K. V. Aleksanyan, O. P. Kuznetsova and A. A. Berlin p. 300 abstract

Mechanisms of Formation of Macrodynamic Thermal Properties of Crystallizing Polymer Nanocomposites

N. I. Mashukov, A. M. Kharaev, A. A. Kyarov and R. Ch. Bazheva p. 305 abstract

The Influence of the Composition of Ethyl Cellulose–Rubber Blends on the Formation of a Thermoplastic Composite

V. V. Myasoedova and I. A. Taran p. 311 abstract

The Influence of the Technological Parameters of Injection Molding on the Physicomechanical Properties of Dynamic Elastoplastic Based on Polyolefins

N. T. Kakhramanov, Z. N. Guseinova and V. S. Osipchik p. 317 abstract

Effect of Nature of Nonpolar Hydrocarbon Solvents on Adsorption Capacity of Synthetic Fatty Acids, Amines, and Amides

V. I. Vigdorovich, E. D. Tanygina, L. E. Tsygankova, L. G. Knyazeva, N. V. Shel’ and M. V. Vigdorowitsch p. 322 abstract

A Technology for Production of Fiberboards Based on Cotton Stalks

V. E. Tsvetkov, Yu. A. Semochkin and A. A. Nikitin p. 328 abstract

Spectral and X-ray Analysis of Copolymers of Pyromellitic Acid Tetranitrile and Thiourea

D. P. Shashkin, N. N. Glagolev, V. V. Promyslova and A. I. Sherle p. 331 abstract

Technology of Adaptation of Material for Systems of Automated Laying of PCMs for Aviation Purposes

A. M. Kudrin, O. A. Karaeva and K. S. Gabriel’s p. 336 abstract

Abradability of Thermoplastic Polyurethane for Flexible Fuel Storage Tanks

A. A. Kolesnikov, A. V. Dedov and L. I. Sharova p. 341 abstract

Contents

Polymer Science, Series D