Contents

Polymer Science, Series D


Vol. 10, No. 3, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Polymer Science, Series D ISSN 1995-4212.


Oligomer–Oligomer Modification upon the Synthesis of Epoxy Polymers with a “Shape-Memory” Effect

I. V. Stroganov and V. F. Stroganov p. 207  abstract

Modification of Epoxy-Amine Compositions on the Basis of Water-Soluble Resin

V. F. Stroganov, A. M. Mukhametova, V. I. Sundukov and E. N. Sundukova p. 213  abstract

A Bonded–Riveted Technique of Fabrication and Machine Maintenance Using Hot-Melt Adhesives

A. K. Anoprienko and N. I. Baurova p. 217  abstract

New Thermally Conductive Silicone Adhesive Sealants

P. A. Storozhenko, R. M. Minas’yan, A. N. Polivanov, I. V. Nikitushkin and O. I. Minas’yan p. 221  abstract

A Study of Epoxide–Polysulfone Polymer Systems for High-Strength Adhesives of Aviation Purpose

E. N. Kablov, L. V. Chursova, N. F. Lukina, K. E. Kutsevich, E. V. Rubtsova and A. P. Petrova p. 225  abstract

A Technology for Manufacturing Tapes and Pastes of Powder Solders on Organic Binders

V. I. Lukin, A. N. Afanas’ev-Khodykin, I. A. Galushka and O. V. Shevchenko p. 230  abstract

Structural Formation and Physicomechanical Characteristics of Epoxy Nanocomposites

I. D. Simonov-Emel’yanov, A. A. Pykhtin, S. A. Smotrova and A. N. Kovaleva p. 236  abstract

Detection of Defects in Components Made of Dispersion-Filled Polymeric Materials by the Method of Infrared Thermography

V. A. Zorin, N. I. Baurova and E. A. Kosenko p. 241  abstract

The Parametric Relationship between the Characteristics of Production Methods of Bonded–Riveted Joints on the Micro- and Macroscales

A. K. Anoprienko and N. I. Baurova p. 244  abstract

Development of Parametric Models for Monitoring Changes in the Properties of Materials in the Process of Operation of Gas Pipelines

V. A. Subbotin, Yu. V. Kolotilov, S. K. Ivashko and V. Yu. Smirnova p. 247  abstract

Method for Stitching-Quality Evaluation in the Manufacture of Multiaxial Carbon Fabrics

I. A. Buyanov and G. V. Malysheva p. 251  abstract

The Use of Peat Mineral Hydrophobizers as Anticlodding Agents for Powder Nitrile Butadiene Rubbers

O. S. Misnikov and I. O. Korolev p. 255  abstract

Bacterial Adhesion to the Surfaces of Elastomeric Materials

A. A. Il’in, L. S. Shibryaeva, O. V. Makarov and L. R. Lyusova p. 260  abstract

Amphiphilic Poly-N-Vinyl-2-Pyrrolidone: Synthesis, Properties, Nanoparticles

P. P Kulikov, A. N. Kuskov, A. V. Goryachaya, A. N. Luss and M. I. Shtil’man p. 263  abstract

Peculiarities of the Structure of Fluoroparaffins and Coatings on Their Basis

N. I. Nefedov, E. K. Kondrashov, S. A. Ponomarenko, O. M. Gorbenko, V. M. Buznik and A. P. Petrova p. 269  abstract

Copolymerization of Vinyl Acetate Initiated by Manganese Tris(Acetylacetonate)

N. A. Lavrov p. 274  abstract

Broadband Radio-Absorbing Materials Based on Porous Composites with Carbon Nanotubes

S. V. Kondrashov, Ya. M. Gurevich, O. V. Popkov, K. A. Shashkeev, A. S. Fionov, M. A. Soldatov and G. Yu. Yurkov p. 279  abstract

Preparation of Miniemulsions of Plant Extracts

P. G. Mizina, S. M. Levachev, P. M. Masese, A. V. Panov, A. E. Kharlov, N. V. Sugak, D. O. Shatalov, A. V. Kovalenko and V. N. Davydova p. 285  abstract

The Effect of Environmental Factors on Biodegradable Polylactide-Based Materials

M. V. Podzorova, Yu. V. Tertyshnaya and A. A. Popov p. 289  abstract

The Current State and Development of Perspectives of Application of Synthetic Antimicrobial Agents

D. O. Shatalov, S. A. Kedik, E. S. Zhavoronok, A. V. Aydakova, I. S. Ivanov, A. S. Evseeva, S. V. Beliakov, S. I. Biryulin, A. V. Kovalenko and E. N. Mikhailenko p. 293  abstract