Vol. 19, No. 2, 2026

Polymer Science, Series D

Influence of the Size of Polymer—Fiber Joints on the Change in Adhesive Strength under Various External Influences. Part 3. Influence of the Size of Fiber—Thermosetting Binder Joints on Their Adhesive Strength under Cyclic Temperature Changes

Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva p. 207 abstract

Increasing the Adhesion of Super-Engineering Thermoplastic to Carbon Fiber (Review)

N. E. Temnikova, V. F. Shkodich, R. M. Akhmadullin, V. I. Mashukov, K. B. Vernigorov, S. V. Martyugov, Yu. M. Kazakov, and O. V. Stoyanov p. 213 abstract

Determination of the Stress–Strain State of a Composite Structure Made from an Organosilicon Matrix Using 3D Printing Technology

I. A. Makagonov, E. S. Chaplina, T. A. Guzeva, and G. V. Malysheva p. 223 abstract

Influence of Mixing Methods of Components in Solutions on the Structure and Elemental Composition of Elastomeric Nanocomposites

R. I. Li, Yu. Kh. Shogenov, M. R. Kiba, and Yu. R. Li p. 228 abstract

Modification of Butadiene–Nitrile Rubber with Tetraethoxysilane

N. I. Garaev, R. Yu. Galimzyanova, A. R. Akhmedgoraeva, and Yu. N. Khakimullin p. 235 abstract

Application of Microfiber Mineral Filler to Improve the Fire and Heat Resistance of Elastomeric Compositions

N. A. Keibal, V. F. Kablov, O. M. Novopoltseva, D. A. Kryukova, V. G. Kochetkov, E. S. Ilyina, and M. I. Shesternin-Gaevoi p. 240 abstract

Prospects of Application of Polyurethane Composite Materials in the Automotive Industry

S. N. Gladkikh, N. P. Korotkova, A. A. Akulinicheva, and E. A. Antipova p. 244 abstract

Butadiene–Nitrile Rubber Modified with Tetraethoxysilane

N. I. Garaev, Yu. N. Khakimullin, and R. Yu. Galimzyanova p. 252 abstract

On Thermodynamic Compatibility of Polyaniline and Polyphenylenedamines with Epoxy Resin

V. P. Meshalkin, S. V. Polunin, A. V. Soldatova, A. V. Grivin, I. Yu. Gorbunova, and Ya. O. Mezhuev p. 257 abstract

Developments in the Field of Fast-Curing Cold-Setting Adhesives (Review)

N. F. Lukina, A. Yu. Isaev, O. I. Smirnov, and K. E. Kutsevich p. 262 abstract

Kinetic Study of Epoxy Oligomer Curing with Active Thinners by the Dielectric Permittivity Method

D. A. Trofimov, A. M. Khort, and I. D. Simonov-Emelyanov p. 271 abstract

Strength, Heat Resistance, and Thermal Expansion of Fiberglass and Basalt-Fiber Reinforced Polymer Rods Manufactured by Pultrusion and Die Drawing Methods

A. K. Kychkin, O. V. Startsev, A. N. Blaznov, A. A. Kychkin, and A. A. Gavrileva p. 276 abstract

Adhesive Properties of Ultrahigh-Molecular-Weight Polyethylene Tapes Modified by Low Temperature Plasma

M. S. Piskarev, T. S. Kurkin, A. V. Zinoviev, E. K. Golubev, A. S. Kechekyan, A. B. Gilman, A. A. Kuznetsov, and A. N. Ozerin p. 284 abstract

Study of the Properties of Vulcanized Rubber Based on Ethylene Propylene Diene Caoutchoucs

E. N. Egorov and N. I. Koltsov p. 288 abstract

The Effect of the Nature and Structure of Polyols on the Properties of Aqueous Polyurethane Adhesive Dispersions

M. N. Leshina, A. D. Vikhireva, K. V. Shirshin, Zh. K. Ibragimova, and S. S. Golovina p. 292 abstract

Production of a Polymer Binder Based on Benzocyclobutene for the Manufacture of Microwave-Range Materials

R. Yu. Osipov, G. E. Adamov, K. S. Levchenko, D. Yu. Demin, P. S. Shmelin, and N. R. Kil’deeva p. 297 abstract

Production of Polyacrylimide Foams under the Influence of Microwave Radiation

A. S. Rodin, N. D. Burmistrov, I. M. Dvorko, and N. A. Lavrov p. 304 abstract

Oil-, Acid-, and Alkali-Resistant Rubber Based on Ethylene Propylene Diene Monomer and Nitrile–Butadiene Rubbers. Effect of Fillers on Rubber Properties

E. N. Egorov and N. I. Koltsov p. 310 abstract

Analysis of Structure of Metallized Composites Used in Flexible Conductor Technology Based on Carbon Fiber and Methyl Methacrylate Adhesive Composition with Silicone Sealant

N. V. Borisova and E. V. Bychkova p. 314 abstract

Comparison of an Improved Knot-Pulling Method and the Pull‑Out Method for Determining Adhesive Strength in a Fiber—Polymer Matrix System

R. R. Ivankov, A. I. Sidorina, and E. A. Ovchinnikova p. 320 abstract

Aging of Carbon Fiber Reinforced Plastic during Exposure on an Open Stand and under a Canopy

O. V. Startsev, M. G. Petrov, E. V. Dvirnaya, T. V. Koval’, and M. M. Kopyrin p. 327 abstract

Nondrying Compound for Corrosion Protection of Metal Materials

I. S. Makushchenko, D. N. Smirnov, N. V. Antyufeeva, and Ya. A. Vakhrusheva p. 334 abstract

Study of the Rheology of Epoxy Binders and the Chemical Resistance of Filament-Wound Composite Products

E. G. Sakoshev, Z. G. Sakoshev, A. N. Blaznov, V. A. Kalistru, and I. I. Savin p. 340 abstract

Structural Changes in Anticorrosion Coatings under the Influence of Chemical and Energy Factors

A. L. Egorova, N. R. Prokopchuk, E. T. Krutko, A. N. Potapchik, A. I. Globa, I. O. Laptik, and Ya. S. Voronets p. 348 abstract

Water-Resistant Polyvinyl Acetate Adhesives: A Review

K. V. Shirshin, K. S. Lobanova, O. S. Vdovina, and N. A. Petrovskaya p. 354 abstract

Rheology of Solutions of Acrylic Acid–Oligo(ethylene glycol methacrylate) Copolymers in a Propylene Glycol–Water Mixture

M. V. Savinova, E. B. Spitsina, O. A. Kazantsev, Ya. V. Dolinov, T. A. Ryabova, and E. N. Sazhina p. 360 abstract

Oil-, Acid-, and Alkali-Resistant Rubber Based on Ethylene Propylene Diene Monomer and Nitrile–Butadiene Rubbers. Influence of the Rubber Ratio on the Rubber Properties

E. N. Egorov and N. I. Koltsov p. 367 abstract

The Synthesis and Properties of Transparent Impregnating Phenol Formaldehyde Resins for Obtaining Laminated Board Materials and Plastics

V. E. Tsvetkov, O. P. Shchelakova, and N. N. Tsvetkova p. 371 abstract

Low-Flammability Polymer Composites Based on Adhesive Prepregs. Part 1. Microstructure of Carbon and Glass Fiber Reinforced Plastics

A. I. Starkov, A. Yu. Isaev, K. E. Kutsevich, E. V. Kurshev, S. L. Lonsky, An. R. Galiullin, and A. A. Barannikov p. 376 abstract

Epoxy Bonding of 3D-Printed Acrylonitrile–Styrene–Acrylate: Optimization of Shear Strength

A. P. Vasiliev and A. A. Okhlopkova p. 383 abstract

Cathodic Disbondment of Anticorrosion Polymer Coatings: A Review

S. V. Tutov, K. B. Vernigorov, V. I. Mashukov, I. A. Starostina, N. E. Temnikova, S. N. Rusanova, Yu. M. Kazakov, and O. V. Stoyanov p. 389 abstract

Using Wood Processing Waste to Clean up Oil and Petroleum Products Spills from Water Surfaces: 1. Using Native Sawdust (A Brief Literature Review)

I. G. Shaikhiev, Z. T. Sanatullova, K. I. Shaikhieva, and A. A. Dyatlova p. 398 abstract

Using Wood Processing Waste to Clean up Emergency Oil and Petroleum Products Spills from Water Surfaces: 2. Using Modified Sawdust (A Brief Literature Review)

I. G. Shaikhiev, Z. T. Sanatullova, K. I. Shaikhieva, and A. A. Dyatlova p. 404 abstract

Using Wood Processing Waste to Clean up Emergency Oil and Petroleum Products Spills from Water Surfaces: 3. Physicochemical and Thermal Modification (A Brief Literature Review)

K. I. Shaikhieva, Z. T. Sanatullova, I. G. Shaikhiev, and A. A. Dyatlova p. 411 abstract

Ultrasonic Treatment of Dispersed Systems of Different Viscosity. Part 1

S. K. Sundukov and A. A. Nechay p. 417 abstract

Ultrasonic Treatment of Dispersed Systems of Different Viscosity. Part 2

S. K. Sundukov and A. A. Nechay p. 424 abstract

Carbonization and Torrefaction Methods for Processing Polymer Solid Waste

E. L. Akim, A. A. Pekarets, P. V. Lukanin, O. V. Rybnikov, O. V. Fedorova, A. A. Tarazanov, E. A. Bobkova, Yu. T. Yuryeva, A. A. Grishin, M. E. Akim, S. Z. Rogovina, and A. A. Berlin p. 431 abstract

Production of Composite Filter Material Using Mechanochemistry for Drinking Water Purification

Yu. A. Tunakova, G. N. Gabdrakhmanova, and V. S. Valiev p. 439 abstract

Utilization of Chemical Water Treatment Sludge as Part of Gypsum Binders (World Literature Review)

R. Sh. Valeev, I. G. Shaikhiev, and Z. T. Sanatullova p. 443 abstract

A Study of the Chemical Composition of Shungite Obtained from Man-Made Waste Dumps of the Bakyrchik Mine (Kazakhstan)

K. B. Vernigorov, S. N. Rusanova, A. V. Kulygin, V. I. Mashukov, S. A. Efremov, A. V. Kasperovich, A. I. Khasanov, A. I. Vagapova, Yu. M. Kazakov, and O. V. Stoyanov p. 450 abstract

The Development of Active Polymer Packaging Based on Polyolefins Dispersion Filled with Betulin

I. Yu. Vasilyev p. 454 abstract

Study of the Properties of Polymer Blends during Biodegradation with the Addition of Recycled Polyethylene and Biodegradable Polymers

M. V. Podzorova and Yu. V. Tertyshnaya p. 461 abstract

Study of the Performance Properties of Epoxy Compounds Prepared in Different Ways

O. Yu. Erenkov, S. P. Isaev, D. O. Yavorskii, and B. I. Potapenko p. 466 abstract

Thermoplastic Elastomers with Reduced Hardness

T. I. Medintseva and O. P. Kuznetsova p. 472 abstract

Evaluation of Low-Temperature Properties of Vulcanizates Based on Ethylene–Propylene–Diene Rubber

M. L. Davydova, A. F. Fedorova, N. V. Shadrinov, A. R. Khaldeeva, and M. D. Sokolova p. 478 abstract

The Development of Thermally Reversible Chitosan-Containing Hydrogel Ink for Extrusion 3D Printing

V. A. Zakharova, E. I. Shevyakova, N. R. Kil’deeva, and V. S. Yakovleva p. 483 abstract

Effect of Poly(ethylene glycol) Oligomer on the Polylactide Matrix in Composites Obtained from Solution

A.-T. T. Tandelov, Yu. V. Tertyshnaya, A. Yu. Gervald, and G. A. Buzanov p. 490 abstract

Insulation for Rotating Machines Operating in Salt Water Environment

A. A. Panov, A. V. Patsino, T. V. Panina, A. L. Panin, B. S. Kirin, N. Yu. Lysov, A. V. Polyudchenkov, M. A. Kravchenko, and V. I. Zhun’ p. 497 abstract

The Efficiency of Heat Treatment of Caprolon before Turning Workpieces

O. Yu. Erenkov and D. O. Yavorskii p. 504 abstract

Materials Based on Chitosan and Silver Iodide Nanoparticles as a Substrate for an Organic Thin-Film Photoresistor

R. B. Salikhov, M. V. Bazunova, T. B. Teregulov, E. I. Kulish, T. R. Salikhov, I. N. Safargalin, and A. D. Ostal’tsova p. 508 abstract

Factor Analysis of the Synthesis of Biodegradable Polymeric Materials Based on Gelatin

N. L. Chalkova, O. A. Mishurina, E. R. Mullina, D. D. Mullina, and Ya. V. Mishurin p. 514 abstract

Effect of Deposition Process Parameters on the Residual Stresses in a Nanocomposite Coating

S. Yu. Zhachkin, G. I. Trifonov, and V. I. Ivanchura p. 521 abstract

Gadolinium Nanoparticles in a Polystyrene Matrix Synthesized by Pulsed Mechanochemistry

A. I. Aleksandrov, V. V. Tkachev, S. B. Zezin, S. S. Abramchuk, V. G. Shevchenko, and A. N. Ozerin p. 525 abstract

Specific Features in the Machining of Polymer Composite Materials

V. A. Skryabin and N. V. Sorokina p. 533 abstract

The Study of the Properties of Wood–Polymer Composites Based on Polyvinyl Chloride Modified with a Brominated Cardanolic Novolac Resin

A. A. Baev, A. E. Shkuro, O. F. Shishlov, and T. V. Yakubova p. 536 abstract

Computerized Quality Management for Import Substitution of the Pharmacopoeial Assortment of Chemical Materials of Reagent Grade and Special Purity Grade

A. M. Bessarabov, V. E. Trokhin, E. V. Tatarnitseva, and O. V. Stoyanov p. 542 abstract

Substituting the Selection of Milling Regimes for Carbon Fiber-Reinforced Plastics to Provide Their High Strength Properties

I. S. Bolotnikov, E. A. Kosenko, and N. I. Baurova p. 549 abstract

Trends and Prospects for Using Polymer Materials in the Manufacture of Medical Devices in Russia

N. D. Avdeev, L. R. Lyusova, N. P. Boreiko, Yu. A. Naumova, and S. N. Musatov p. 555 abstract

Insulation for Rotating Machines Operating in Salt Water Environment: Selection of Binders

A. A. Panov, A. V. Patsino, T. V. Panina, A. L. Panin, B. S. Kirin, N. Yu. Lysov, A. V. Polyudchenkov, M. A. Kravchenko, and V. I. Zhun’ p. 561 abstract

Compression Textiles: From Space to Rehabilitation Clothing

V. V. Getmantseva and M. A. Guseva p. 570 abstract

Contents

Polymer Science, Series D