Contents

Polymer Science, Series D

Vol. 18, No. 2, 2025

Effect of Fillers Derived from Natural Sources on the Adhesive Properties of Some Polyolefins

V. V. Bushkov, K. B. Vernigorov, S. N. Rusanova, S. V. Tutov, S. A. Efremov, A. V. Kasperovich, Yu. M. Kazakov, and O. V. Stoyanov p. 245  abstract

A Study of the Rheological Properties of a Binder Based on Phosphazene-Containing Epoxy Oligomer

S. S. Malakhovsky, V. V. Shutov, N. V. Kostromina, Yu. V. Olikhova, N. G. Davidyants, D. V. Onuchin, T. P. Kravchenko, and I. Yu. Gorbunova p. 250  abstract

A Study of the Influence of Curing Modes on the Properties of Basalt Plastics Based on Epoxy Binder

A. S. Borodulin p. 258  abstract

New Ionene-Containing Methacrylic Macromonomers for the Synthesis of Polymer Materials with Bactericidal Properties

I. R. Arifullin, D. M. Kamorin, O. A. Kazantsev, D. V. Orekhov, A. S. Simagin, V. D. Kavtrova, and E. B. Spitsina p. 262  abstract

Regulation of the Properties of Composites Based on the Products of Thioetherification Reaction of Epoxy Resins with Thiokol by Mixing Epoxy Resins of Different Molecular Weights

Yu. S. Kochergin, and E. E. Samoilova p. 271  abstract

The Use of Pipe-Production Waste as Polyfunctional Modifiers of Polychloroprene Adhesives

N. A. Keibal, V. F. Kablov, V. G. Kochetkov, D. A. Kryukova, D. A. Urzhumov, and Yu. A. Gunko p. 277  abstract

Adhesive Properties of Compositions Based on Mixtures of Butadiene-Nitrile Rubber–Thiokol Modified with Rosin

K. N. Slobodkina, K. B. Vernigorov, Yu. M. Kazakov, and O. V. Stoyanov p. 283  abstract

The Mechanism of Destruction of Epoxy Matrices Modified with Thermoplastic and Active Diluent and Fiberglass-Based Plastics under Low-Speed Impact

T. V. Petrova, I. V. Tretyakov, D. A. Bulgakov, and V. I. Solodilov p. 288  abstract

The Effect of Ultrasonic Treatment on Polymerization of Epoxy Adhesive at Different Temperatures

S. K. Sundukov, and A. V. Sukhov p. 296  abstract

Binding Quality of Printed Paper Using Hot Melt Adhesives

V. N. Serova, and A. I. Khasanov p. 302  abstract

Evaluation of Fatigue Behavior of Bitumen Binders by the Linear Amplitude Sweep Method: Influence of Temperature, Aging and Modification

V. N. Gorbatova, I. V. Gordeeva, T. V. Dudareva, I. A. Krasotkina, and A. A. Berlin p. 306  abstract

Devices and Methods for Testing Self-Adhesive Materials

K. A. Meleshko, A. A. Ashirbekova, V. V. Shepelevich, A. E. Gordienko, A. P. Pushkareva, and A. A. Anikeenko p. 316  abstract

New Betulin-Containing Copolymers of Oligo(ethylene glycol) Methacrylates

D. V. Orekhov, O. A. Kazantsev, A. P. Sivokhin, E. B. Spintsina, and K. V. Shirshin p. 321  abstract

Assessment of Adhesion Strength and Failure Mechanisms in Thermosetting Binder—Fiber Joints Coated with a Layer of Cured Binder

Yu. A. Gorbatkina, I. Yu. Gorbunova, V. G. Ivanova-Mumzhieva, R. A. Korokhin, and A. V. Kuznetsova p. 329  abstract

Polyethylene Adhesive Compositions for Anticorrosion Protection of Pipes

S. V. Smirnov, A. E. Zaikin, S. V. Tutov, K. B. Vernigorov, S. N. Rusanova, Yu. M. Kazakov, and O. V. Stoyanov p. 338  abstract

Structure and Adhesion Properties of Diene–Vinyl Aromatic Thermoplastic Elastomers

E. I. Antman, L. R. Lyusova, L. S. Shibryaeva, and S. V. Kotova p. 342  abstract

The Influence of Various Resins on Adhesive Strength of Chloroprene Rubber Adhesive Compositions

M. N. Nagornaya, and D. D. Penzev p. 348  abstract

Application of Maleic Anhydride-Modified Polyethylene (Review)

S. V. Tutov, K. B. Vernigorov, Kh. S. Abzal’dinov, Yu. M. Kazakov, and O. V. Stoyanov p. 351  abstract

Paper–Polymer Composite Materials. Review

O. A. Borisova, and A. N. Ivankin p. 361  abstract

Composite Nanoparticles as a Basis for Designing Heterogeneous Catalysts

I. Yu. Isaeva, G. Yu. Ostaeva, I. V. Morenko, V. V. Grushina, and A. V. Ovcharov p. 369  abstract

Poly(arylene ether ketones) with Dichloroethylene Groups

A. M. Kharaev, R. Ch. Bazheva, Z. L. Beslaneeva, D. A. Alakaeva, M. M. Parchieva, M. A. Yalkhoroeva, and Z. I. Inarkieva p. 373  abstract

Automated Syrup Filling Systems Based on Pneumatic Level Sensors

V. S. Bezmenov p. 378  abstract

Ageing of VKU-39 Carbon Plastic under Moderately Warm and Tropical Climate Conditions. 1. Changes of Strength Indicators

O. V. Startsev, A. A. Skirta, V. O. Startsev, E. O. Valevin, and A. M. Kogan p. 382  abstract

Aging of the VKU-39 Carbon Plastic under Moderately Warm and Tropical Climate Conditions. 2. Change in Physical Properties

O. V. Startsev, A. A. Skirta, V. O. Startsev, E. O. Valevin, and A. M. Kogan p. 387  abstract

A Technique to Study the Structure of Powder Materials

V. A. Skryabin p. 392  abstract

Effect of UV Radiation on the Thermal Properties and Degradation of Biodegradable Aliphatic Polyester Polylactide

S. M. Lomakin, S. Z. Rogovina, O. P. Kuznetsova, L. A. Zhorina, N. G. Shilkina, A. V. Khvatov, E. O. Perepelitsina, I. M. Ermolaev, N. A. Erina, and A. A. Berlin p. 395  abstract

A New SiO2 Sorption Material for Wastewater Treatment in Plant-Based Raw Material Processing

A. I. Puzynin, K. A. Taraskin, D. S. Orlov, E. K. Barnashova, and E. A. Vertikova p. 401  abstract

The Effect of Structure on the Hydrophysical Properties of Sulfur Concretes Made of Yakutia’s Local Mineral Feedstock

O. N. Burenina, T. M. Solov’ev, M. E. Savvinova, A. V. Andreeva, and L. A. Nikolaeva p. 406  abstract

Simulation of Technological Modes to Produce Silicone Molds Based on 3D Master Models

A. O. Dvoryankin, and N. I. Baurova p. 411  abstract

A Study of the Possibility of Applying Fatigue Hardening for Increasing the Fatigue Life of Metal Parts

A. V. Lavrov, N. O. Yakovlev, and M. V. Grigor’ev p. 416  abstract

Using Cereal Waste to Remove Hydrocarbon Spills from Water Surfaces. 3. Wheat and Rice Grain Hulls (A Review of World and Domestic Literature)

I. G. Shaikhiev, K. I. Shaikhieva, S. V. Sverguzova, and T. R. Deberdeev p. 422  abstract

New Phosphorus–Nitrogen-Containing Flame Retardants for Composite Materials Based on Condensation Polymers

Yu. M. Evtushenko, S. Kh. Toirov, V. A. Ushkov, and A. A. Berlin p. 429  abstract

Development of Polyethylene Conductive Composites for Blow Molding of Reusable Fuel Containers

E. S. Petukhova, A. G. Argunova, A. L. Fedorov, V. V. Sleptsov, and P. N. Petrova p. 435  abstract

The Development of Flame-Retardant Copolymers Based on Allyl Compounds

F. B. Abdukadirov, A. B. Sivenkov, M. Sh. Rakhimbabaeva, M. E. Mavlyanova, and B. A. Mukhamedgaliev p. 441  abstract

Effect of Carbon-Mineral Filler on the Deformation–Strength Characteristics of Polyethylene in the Process of Thermal Aging

V. V. Bushkov, K. B. Vernigorov, S. N. Rusanova, S. A. Efremov, Yu. M. Kazakov, and O. V. Stoyanov p. 445  abstract

Prospects for the Application of Neural Networks in the Manufacture of Composite Parts

A. A. Baurov p. 448  abstract