Vol. 17, No. 2, 2024
Hydrogels with Adhesive Properties for Prevention and Treatment of Periprosthetic Infection
p. 225 abstract
Modification of Ethyl 2-Cyanoacrylate with Polymer para-Dinitrosobenzene for Steel–Elastomer Adhesive Joints
p. 232 abstract
Vulcanization of Elastomer Compositions with Silicon Acid Fillers
p. 236 abstract
Modification of Phenol Formaldehyde Resins with Wood-Pyrolysis Liquid
p. 242 abstract
Welding of Parts from Thermoplastic-Based Polymer Composite Materials. Part 2. Methods of Welding Parts from Thermoplastic-Based Polymer Composite Materials Using External Heat Sources
p. 247 abstract
Preparation of an Epoxy Glue by Ultrasonic Treatment
p. 252 abstract
Effect of the Ultrasonic Treatment of an Epoxy Glue on the Strength of a Joint
p. 259 abstract
A Study of Phosphorus–Nitrogen-Containing Modifier with Polyfunctional Action in Polymer Systems
p. 266 abstract
Low-Flammability Epoxyamine Polymers
p. 273 abstract
The Evolution of the Adhesive Strength of a Fiber Matrix in Fiberglass Plastics under the Influence of Climatic Factors
p. 279 abstract
Research on Elastomeric Fire- and Heat-Protection Materials Containing Plasma-Treated Microspheres
p. 286 abstract
A Study of the Physical and Mechanical Properties of Organosilicon Compounds of the KTT Brand under Conditions of the Influence of High Temperatures and Environmental Humidity
p. 291 abstract
A Wood Chipboard Technology Using Modified Phenol and Formaldehyde Binder
p. 298 abstract
Measurement of Strength and Fracture Load of Weathered Samples of Polymer Composite Materials
p. 302 abstract
The Effect of Calcium Carbonate on the Properties of Sealing Compositions Based on Low-Molecular-Weight Polyethylene
p. 311 abstract
A Study of the Protective Properties of a Polysulfide Sealant Containing Corrosion Inhibitors
p. 315 abstract
Adhesives for Gluing Rubbers to Metals during the Vulcanization Process: A Review
p. 322 abstract
Modified Amino-Formaldehyde Resins in the Production of Decorative Paper Laminate
p. 329 abstract
The Scale Factor When Testing Adhesive Joints of Heteroaramid Threads Using the “Loop” Method
p. 332 abstract
An Energy Criterion for Adhesive Failure of a Composite Pipe under the Influence of External Pressure
p. 337 abstract
The Effect of Filler and Modifier on the Fatigue Characteristics of Road Bitumen
p. 344 abstract
Adhesively Active Composition Based on an Unsaturated Polyketone and a Chlorine-Containing Epoxy Oligomer
p. 353 abstract
Research on the Thermophysical and Mechanical Properties of a Composite with Casein Binder
p. 361 abstract
Mono-, Di-, and Trinitrosoarenes: Modifiers for Cyanoacrylate Adhesives
p. 365 abstract
Obtaining an Epoxy-Acrylic Oligomer for Photocurable Varnishes
p. 369 abstract
Single-Component Polyurethane Sealants
p. 373 abstract
New Hybrid Sublayers for Heat- and Water-Resistant Adhesive Joints of Cast Polyurethane with Metals
p. 378 abstract
Biodegradable Biliary Stents. Materials and Methods for Evaluating Functional Properties. A Review
p. 383 abstract
Aromatic Copolyetheretherketones
p. 392 abstract
Biodegradation of a Polymer Composition Surface Based on ED-20 Epoxy Resin with Encapsulated Copper(I) Oxide Particles
p. 397 abstract
Study of Gypsum Samples with Additions of Mineral Particles
p. 402 abstract
Study of the Influence of Fluoroplastic F-42 on the Properties of Butadiene–Nitrile Rubber
p. 407 abstract
Injection Molding of Products Made of Particulate-Filled Polymer Composite Materials with Various Structures
p. 413 abstract
On Unusual Fractures Occurring under Testing Static Crack Resistance
p. 420 abstract
Materials for the Systems of Lightning Protection of Polymer Composite Materials. Manufacturing Features (Review, Part I)
p. 427 abstract
Features of the Use of Electrically Conductive Knitted Wire Meshes and Perforated Foils When Creating Lightning-Protection Systems for Polymer Carbon Composite Structures (Review, Part II)
p. 433 abstract
Lightning Protection Systems for PCM Structures Containing Electrically Conductive Metal Knitted Wire Meshes and Perforated Foils (Review, Part III)
p. 439 abstract
Frost- and Oil-Resistant Polymer Material Based on an Unsaturated Polyketone and Chlorine-Containing Epoxy Oligomers
p. 445 abstract
Polymer Materials for 3D Printing (Fused Deposition Modelling)
p. 450 abstract
Study of the Biodegradability of Polymer Materials for Use in Agriculture
p. 455 abstract
Biodegradable Polymer Materials Based on Polyvinyl Alcohol, Starch, and Cellulose Derivatives
p. 461 abstract
Regenerated Cellulose. Review. Part 1. Cellulose Structure, Solvent Systems, and Dissolution Mechanisms
p. 466 abstract
Ionic Liquids as Modifiers for the Electrophysical Characteristics of Fillers and a Polymer Material
p. 474 abstract
The Effect of Aluminosilicate Cenospheres on the Structure and Thermal Properties of Butadiene–Styrene Thermoplastic Elastomer
p. 478 abstract
Features of Phase Transformations in Porous Powder Materials
p. 484 abstract
Methodological Features of Studying the Contact Angle of Carbon Fibers
p. 488 abstract
Promising Directions of Development for the Use of Sorbents Based on Silicon Oxide in the Technology of Wastewater Treatment for the Production of Composite Materials
p. 495 abstract
The Influence of Metal Sludge on the Oxidative Destruction of Low-Density Polyethylene
p. 502 abstract
Development of a Scheme and Method for Producing Silicon Carbides in the Surface Layer of a Copper Slag Particle for Waterjet Cutting
p. 507 abstract
Effect of Environmental Factors on Polylactide–Polybutylene Adipate Terephthalate Composites
p. 516 abstract