Vol. 16, No. 2, 2023
Nonflammable Cold-Curing Composites
p. 221 abstract
A Natural Thermoreactive Binder for Lignin–Carbohydrate Compositions
p. 228 abstract
The Influence of Reinforcing Fibrous Filler on Properties of VK-36 Epoxy Polysulfon Adhesive
p. 233 abstract
The Effect of Lignin on the Reactivity of Phenol-Formaldehyde Resin and Properties of a Thermal-Insulation Material Based on It
p. 239 abstract
A Study of the Rheological, Physicomechanical, and Thermomechanical Properties of Epoxy Binders with Various Curing Agents
p. 245 abstract
Radiation Aging of Polymer Composite Materials
p. 251 abstract
On the Possibility of Using Adhesive–Sealants Based on MS-Polymers for Structural Glazing
p. 261 abstract
Adhesive-Material Combustibility-Reduction Methods. Part 1
p. 268 abstract
Adhesive-Material Combustibility-Reduction Methods. Part 2. Combustibility Reduction by Adding Low-Combustibility Oligomers
p. 273 abstract
An Investigation of Complexes of Lignin Found in Plant Raw Materials as a Natural Binder in Obtaining Plastic in Closed Molds
p. 278 abstract
Optimization of Adhesive Composition for Bonding Plywood
p. 285 abstract
Kinetics of Synthesis of N-Vinyl-2-Pyrrolidone Oligomers with Amino End Groups for Stabilization of Aqueous Gossypol Dispersions
p. 291 abstract
An Oil-Resistant Liner Composition Based on Unsaturated Rubber and Chloride-Containing Epoxy Oligomer
p. 298 abstract
A Neural Network Approach to Processing Photos of Carbon-Fiber-Reinforced Polymer Microstructures for Their Further Diagnostics
p. 307 abstract
Influence of a Binder Composition Containing Diaplast Phenoxy Thermoplastic Resin on Properties of a Low-Viscosity Resin for Injection Technologies
p. 313 abstract
Features of the 1,3,5-Trioxane Stabilization Process
p. 322 abstract
The Influence of Aging and Modification on the Relaxation Properties of Oil Road Bitumen and Asphalt Mastic
p. 327 abstract
Analysis of Pentaerhythritous Esters of Rosin as “Tackiness Agents” for Adhesive Compositions
p. 334 abstract
Thermal Oxidation of Ethylene Copolymer with Vinyl Acetate in the Presence of Petroleum Polymer Resin
p. 340 abstract
A Composition Based on Linear-Ladder Siloxane Block Copolymer to Obtain Protective Coatings with High Physical and Chemical Properties
p. 345 abstract
Blocked Polyisocyanate as an Adhesion Promoter for Polyester Cord
p. 353 abstract
Application of MS-Polymer Based Adhesive–Sealants for Glazing and Glass Sealing
p. 359 abstract
Interaction of Iron(III) Oxide Nanoparticles with a High-Density Polyethylene Matrix
p. 365 abstract
Evaluation of the Effect of Modifiers on the Technological and Deformation Properties of Recycled Polystyrene
p. 370 abstract
Analysis of Properties of Reinforced Plastics Based on Modified Epoxy Resins
p. 374 abstract
The Influence of Petroleum Polymer Resin on Thermal Oxidation of High-Density Polyethylene
p. 377 abstract
Modification of High-Pressure Polyethylene and Ethylene–Vinyl Acetate Copolymer with Sepiolite Chain-Layered Silicate
p. 381 abstract
Methodological Approaches to the Improvement of Technology of Engineering Fluorocomposites
p. 386 abstract
Research Methodology of Model Compositions for Casting Gas-Turbine Engine Blades
p. 392 abstract
Thermotactic Inorganic and Polymeric Coatings for the Buran Spaceplane
p. 396 abstract
Composite Materials Based on Basalt. Part 1. Application of Basalts in Composite Materials
p. 401 abstract
Application of Software Packages for Analyzing the Performance of the Nonmetallic Part of a Pneumatic Spring
p. 406 abstract
Bioplastics Based on Copolymers of Glycerin, Phthalate Anhydride, and Lactic Acid
p. 410 abstract
Microfluidic Synthesis of Oligohexamethylene Guanidine Hydrocitrate and Study of Its Antimicrobial Activity
p. 415 abstract
Imide-Containing Compositions for Tribotechnical Coatings Based on Polytetrafluoroethylene
p. 420 abstract
Application of Statistical Criteria for Checking the Homogeneity of Dispersions of Results of Fatigue Tests of Heat-Resistant Alloys Produced by Selective Laser Melting
p. 427 abstract
Composite Materials Based on Basalt. Part 2. Composite Materials Based on Basalt Fibers and Condensation-Type Polymers
p. 435 abstract
Development of the Field of Elastomer Adhesives at the Koshelev Department of Chemistry and Technology of Elastomer Processing of Moscow State University of Fine Chemical Technologies, MIREA–Russian Technological University
p. 440 abstract
Creation of Electrically Conductive Rubbers as a Promising Area in Chemistry and Technology of Processing Elastomers
p. 448 abstract
Self-Sealing Elastomer Materials Based on Natural Rubber with Fibrous Fillers
p. 455 abstract
An Electrospun Thermoadhesive Material as a Component of Multilayered Composites for the Filtration of Aircraft Fuels and Hydraulic Fluids
p. 459 abstract
Evaluation of the Grip Qualities of Tire-Tread Rubber on Road Surfaces
p. 467 abstract
Wastewater Treatment after Waterjet Cutting to Create a Reverse Water Cycle
p. 473 abstract
The Effect of the Nature of Biodegradable Components on Biodegradability of Composites Based on Polyethylene
p. 477 abstract
Epoxy Binders for the Creation of Low-Combustible and Fire-Safe Types of Polymer-Composite Materials
p. 483 abstract
The Effect of Thermal Stresses on the “Crazing Resistance” of Optically Transparent Polycarbonate
p. 490 abstract
The Use of Thermal Analysis for the Study of Carbon Fillers in Polymer-Composite Materials
p. 494 abstract