Vol. 14, No. 2, 2021

Polymer Science, Series D

Increasing Adhesion between Components of the Polyethylene–Polychloroprene Mixture When Using Nanofillers

A. E. Zaikin and A. R. Akhmetov p. 129 abstract

Wood–Polymer Duroplastics Based on Modified Phenol–Formaldehyde Resins

O. P. Machneva, Yu. V. Pas’ko and A. A. Nikitin p. 134 abstract

A Frost-Resistant Urethane-Containing Compound

A. I. Slobodinyuk, V. Yu. Senichev, D. M. Kisel’kov, M. A. Makarova, M. V. Kulakova and M. V. Perepada p. 138 abstract

Achievements in the Field of Initiating Systems of Curing of Anaerobic Adhesives

D. A. Aronovich p. 143 abstract

Hybrid Polyurethane Adhesive Sealants with Increased Strength Characteristics

S. E. Loginova, S. N. Gladkikh, E. A. Kurilova and N. V. Nikonova p. 156 abstract

A Study of the Covulcanization of Polysiloxane and Polyurethane Rubbers

R. M. Minas’yan, P. A. Storozhenko and M. R. Maksimenko p. 160 abstract

Evaluation of the Operational Characteristics of Modified Synthetic Resins and Plywood on Their Basis

E. G. Sokolova, D. S. Rusakov, A. N. Chubinskii, G. S. Varankina and S. A. Ugryumov p. 164 abstract

Methods for Studying Aging of Polymer Binders

V. O. Startsev p. 169 abstract

The Application of Similarity Coefficients in Testing Weldbonded Joints

A. Yu. Konoplin and N. I. Baurova p. 179 abstract

Use of Adhesives in Honeycomb Structures

N. F. Lukina, A. P. Petrova and A. Yu. Isaev p. 184 abstract

Modification of Alkyd and Alkyd-Melamine Binders with Imide-Containing Oligomers

N. I. Hloba and E. T. Krut’ko p. 190 abstract

Desorption of Inactive Solvent from Epoxy Compounds

D. A. Trofimov, S. I. Shalgunov and I. D. Simonov-Emel’yanov p. 197 abstract

Development of Corrosion-Resistant Materials Using ED-20 Epoxy Resin Modified with Viniflex

V. S. Osipchik, Khlaing Zo U, N. V. Kostromina, T. P. Kravchenko and Ya. O. Mezhuev p. 205 abstract

Curing of an Epoxy Composition in the Presence of Functionalized Diene Rubber

Yu. V. Olikhova, O. I. Loban, K. Yu. Kolybanov and T. P. Kravchenko p. 208 abstract

The Effect of Fillers on the Properties of Uncured Sealants Based on Nitrile Butadiene Rubber

A. R. Akhmedgoraeva, A. A. Stytsenkov, R. Yu. Galimzyanova and Yu. N. Khakimullin p. 213 abstract

Epoxy Anhydride Low-Combustibility Compositions for Impregnating Electronics Products

I. V. Stroganov and V. F. Stroganov p. 218 abstract

Features of a Non-Detachable Adhesive Bonding of Parts of Microfluid Devices from Polymethyl Methacrylate

T. A. Lukashenko, A. N. Zubik, A. L. Bulyanitsa and A. A. Evstrapov p. 222 abstract

Changing the Mechanism for Curing Epoxy Oligomers in the Presence of Functionalized Carbon Nanotubes

S. V. Kondrashov p. 227 abstract

Fracture Toughness of Syntactic Composites

A. V. Baikov, R. A. Korokhin and V. I. Solodilov p. 237 abstract

Heat-Resistant Polyurethane Coatings

M. A. Karimova and I. N. Bakirova p. 241 abstract

The Effect of the Composition of the Extractant on the Kinetics of Desorption of Plasticizers from Polyvinyl Chloride

V. G. Nazarov and A. V. Dedov p. 245 abstract

Composite Coatings Based on Inorganic Phosphates (Review)

A. P. Petrova and S. A. Demin p. 250 abstract

The Use of Impregnating Compositions upon Service of the Spring Elements of Road Vehicles Fabricated from Nonmetallic Materials

I. G. Marenkov and N. I. Baurova p. 253 abstract

Features of Determination of Internal Stresses in Functional Coatings

M. A. Markov, Yu. A. Kuznetsov, A. V. Krasikov, I. N. Kravchenko, A. D. Bykova, S. N. Perevislov and M. G. Merkulova p. 257 abstract

The Effect of Copper and Zinc Coatings on the Properties of Carbon Fibers and Composites Based on Them

V. A. Nelyub p. 260 abstract

Developments in the Field of Biocompatible Composite Materials Based on Biopolymers and Calcium Phosphates Adapted to Prototyping Technology

A. Yu. Teterina, O. V. Baranov, P. V. Mikheeva, M. A. Gol’dberg, S. M. Barinov and V. S. Komlev p. 265 abstract

Ensuring the Informational Effectiveness of Ultrajet Diagnostics for Quality Control of Composites

S. V. Bochkarev, A. A. Barzov and A. L. Galinovskii p. 269 abstract

Physicochemical Features of the Structure, Properties, and Application of Ethoxylated Derivatives of Normal Decyl Alcohol and Ethoxylated Derivatives of Isononylphenol

S. V. Mysik p. 274 abstract

Aromatic Polyethersulfones with Improved Physical and Mechanical Indices

A. M. Kharaev, R. Ch. Bazheva, M. M. Parchieva, M. A. Yalkhoroeva, Z. I. Inarkieva and A. A. Kongapshev p. 280 abstract

Studying Viscous and Surface Properties in Water–Polymeric Fire-Extinguishing Solutions

V. F. Kablov, N. A. Keibal, I. N. Khlobzheva and A. S. Borovikova p. 284 abstract

Structural Analysis of Powder Celluloses by FTIR Spectroscopy

K. S. Momzyakova, Z. T. Valishina, T. R. Deberdeev, A. A. Aleksandrov, A. A. Berlin and R. Ya. Deberdeev p. 288 abstract

The Application of Polyaniline and Polypyrrole in the Medical and Biological Fields. Part 1: Aspects of Toxicology and Biocompatibility

Ya. O. Mezhuev, M. I. Shtil’man and A. A. Artyukhov p. 293 abstract

Curing Rheokinetics and Properties of Liner Compositions Based on Oligodiurethane Epoxy Rubber That Are Cured by Various Dinitrile Oxides

O. I. Sidorov, N. E. Evseev, D. V. Pleshakov, L. A. Davydova, K. A. Pchelintsev and R. E. Golub p. 298 abstract

The Prospects of Application of Microfluidics for Synthesis of Compounds from the Alkylene Guanidine Series

I. S. Ivanov, S. A. Kedik, D. O. Shatalov, O. A. Legon’kova, A. V. Aidakova, A. M. Norin and M. D. Khar’kovskaya p. 305 abstract

The Effect of Phenolic Antioxidants on the Nominal Tensile Strength of Nitrile Butadiene Rubbers during Full-Scale Exposure

A. F. Fedorova, M. L. Davydova, M. D. Sokolova and V. V. Pavlova p. 312 abstract

Contents

Polymer Science, Series D