Contents

Polymer Science, Series D

Vol. 12, No. 2, 2019

Modification of Acrylic Composites by Aluminosilicate Nanofillers

V. P. Rybalko, E. I. Pisarenko, P. B. D’yachenko, S. A. Timerkhanov and A. S. Korchmarek p. 111  abstract

A Study of the Relaxation Processes in an Adhesive Composition Based on Unsaturated Polyketone

Yu. M. Milekhin, D. N. Sadovnichii, O. I. Sidorov and E. V. Bogdanova p. 116  abstract

Modification of Polyvinyl Chloride Compositions by Polymerizable Epoxyallyl Oligomers

L. A. Abdrakhmanova and V. F. Stroganov p. 121  abstract

Polyatomic Alcohols as Urea–Formaldehyde Resin Modifiers

O. P. Machneva, V. E. Tsvetkov and M. Yu. Ekimova p. 124  abstract

Promising Nanocomposite Based on Elastomer F-40 for Repairing Base Members of Machines

R. I. Li, D. N. Psarev and M. R. Kiba p. 128  abstract

The Influence of Multiple Curing on the Strength of a Fiber–Matrix Interface

Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva and V. I. Solodilov p. 133  abstract

The Influence of Thickness and Reinforcement on the Properties of Sealing Tapes of Incongealable Type on the Basis of Butyl Rubber Depending on the Nature of the Glued Substrate

A. R. Akhmedgoraeva, A. A. Stytsenkov, R. Yu. Galimzyanova and Yu. N. Khakimullin p. 137  abstract

Peculiarities of the Behavior of Lactam-Containing Complexes in Adhesive Compositions

A. F. Puchkov, N. A. Tret’yakova, E. A. Mamin and I. I. Abol’skaya p. 142  abstract

A Thixotropic Siloxane Composition for Protection of Caseless High-Voltage Solid-State Devices

O. V. Neelova and M. F. Guzzitaeva p. 147  abstract

The Influence of the Amount of Rigid Blocks on the Physical and Mechanical Properties of Sealants and Coatings on the Basis of Polyurea

S. V. Romanov, Yu. T. Panov and O. A. Botvinova p. 154  abstract

The Effect of Direct Current Discharge on the Adhesion Properties of Poly(ethylene terephthalate) Films

M. A. Piskarev, A. V. Zinov’ev, A. B. Gilman, A. S. Kechek’yan and A. A. Kuznetsov p. 159  abstract

Evaluation of the Protective Efficiency of IFKhAN-114 Volatile Inhibitor against Atmospheric Corrosion of Copper by Polarization Measurements

V. I. Vigdorovich, L. E. Tsygankova, L. G. Knyazeva, N. V. Shel’, A. N. Dorokhova and M. V. Vigdorowitsch p. 162  abstract

Polymer Composites with Biodegradative Properties

A. V. Trunilina and N. I. Baurova p. 167  abstract

Reinforcing Fillers for Polymer Composites Based on Organic Unwoven Materials

A. N. Marycheva, T. A. Guzeva, P. M. P’e, L. Kh. Tun and G. V. Malysheva p. 170  abstract

Composites Based on Sevilen and Starch

L. A. Zhorina, O. P. Kuznetsova, L. V. Vladimirov, S. Z. Rogovina, E. V. Prut and A. A. Berlin p. 174  abstract

Change of Morphology and Swelling of Cured Epoxy Compositions upon Their Modification with Minute Quantities of Nickel/Carbon Nanocomposite

N. M. Karavaeva, Yu. V. Pershin, V. I. Kodolov, G. S. Bystrov and T. R. Deberdeev p. 179  abstract

Tribotechnical Properties of Composite Materials Based on Epoxy Polymers

N. A. Lavrov, Sh. N. Kiemov and V. K. Kryzhanovskii p. 182  abstract

Effect of the Change in Characteristics of a Sound-Absorbing Filler on Acoustic Properties of Sound-Absorbing Structures in the Noise Suppression System of Engines

E. M. Shul’deshov, A. V. Nyrtsov, A. E. Sorokin and A. P. Petrova p. 186  abstract

The Effect of γ-Radiation on Antimicrobial Properties of Polyvinylpyrrolidone-Based Gels

O. A. Legon’kova, R. P. Terekhova, S. A. Bozhkova, B. G. Akhmedov, L. Yu. Asanova, E. M. Polyakova and A. M. Chililov p. 192  abstract

A Study of the Dielectric Permittivity and Specific Volume Resistance of Synthetic Isoprene Rubber and Polyethylene Composites Containing Carbon Soot and Aluminum Nanoparticles

A. M. Kugotova, B. I. Kunizhev, R. B. Tkhakakhov, A. M. Kharaev, L. V. Kanukoeva and A. Yu. Paritov p. 196  abstract

Physical and Chemical Properties of Composites Produced on the Basis of Disperse-Filled Blends of Polymers

V. V. Myasoedova, I. A. Taran and A. V. Lushkova p. 203  abstract

Predicting the State of Structures under Intrinsic Limit States

Yu. V. Kolotilov, Yu. A. Maksimenko, I. Yu. Aleksanyan and A. F. Dorokhov p. 207  abstract

Simulation of the Gas Evolution Process and Filtration during Preparation of Ipresscon® Carbon Frames

R. A. Turusov, E. A. Bogachev, A. Yu. Sergeev and A. B. Elakov p. 211  abstract

Biocomposites for Oncological Treatment Based on Ultrafine Polyhydroxybutyrate Fibers Obtained by Electrospinning

A. A. Ol’khov, V. N. Gorshenev, I. A. Muravlev, M. G. Strashnova and A. L. Iordanskii p. 218  abstract

The Effect of Mixing Conditions on the Mechanical Properties of Polymer Mixtures of Low-Density Polyethylene and Rubber Powder Based on Ternary Ethylene–Propylene–Diene Elastomer

O. P. Kuznetsova, A. Yu. Vasilenko and E. V. Prut p. 223  abstract