Contents

Polymer Science, Series D

Vol. 11, No. 2, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Polymer Science, Series D ISSN 1995-4212.

Conformational Transformations of ε-Caprolactam as an Advantage in the Production of Molecular Complexes Used in Adhesive Technology

A. F. Puchkov, N. A. Tret’yakova, E. A. Mamin and M. P. Spiridonova p. 117  abstract

Influence of Polarization of Urea-Formaldehyde Glue in the Process of Manufacture of Plywood on Its Water and Moisture Absorption

M. F. Galikhanov, P. A. Platonova and A. F. Zamilova p. 122  abstract

Detecting Interlaminar Separations and Glue-Line Defects in Five- and Seven-Layer Honeycomb Parts and Structural Elements Made of PCMs via an Acoustic Method

A. S. Generalov, A. S. Boichuk, V. Yu. Chertishchev, S. I. Yakovleva and I. A. Dikov p. 127  abstract

Resole-Type Phenol–Formaldehyde Resin with Neutralized Liquid Products of Fast Pyrolysis of Birch Wood

S. A. Zabelkin, A. N. Grachev, G. M. Bikbulatova, A. E. Yakovleva, A. A. Makarov and V. N. Bashkirov p. 131  abstract

A Polyurethane Coating Based on Hydroxyethylated Diphenylolpropane

I. N. Bakirova and N. V. Galkina p. 135  abstract

Adhesive Compositions Based on Styrene–Isoprene–Styrene Three-Block Copolymer with Different Modifiers

A. A. Scherbina and A. E. Chalykh p. 140  abstract

Properties of Epoxy Materials Used for Production of Glass-Reinforced Plastics by the Winding Method

V. A. Nelyub and A. S. Borodulin p. 147  abstract

The Synergistic Effect of a Mixture of the Oligomer of 2,2,4-Trimethyl-1,2-Digidrochinoline and Polymeric Petroleum Resin on the Adhesion of Chlorobutyl Rubber to Steel

A. E. Zaikin, I. A. Starostina and O. V. Stoyanov p. 154  abstract

Siloxane Composition for the Passivation of p–n Junctions of High-Voltage Semiconductor Devices

O. V. Neelova p. 159  abstract

A Sealant Based on Polydimethylsiloxane Modified with Gallium Oxide

V. Yu. Chukhlanov, O. G. Selivanov and N. V. Chukhlanova p. 165  abstract

The Effect of Oligoethers Based on Secondary Polyethylene Terephthalate and Oligopropylene Diol on the Properties of Novolac Compounds

D. A. Panfilov and I. M. Dvorko p. 169  abstract

Properties of Polyurethanes Prepared by Structuring Oligodienediols at Double Bonds and Hydroxyl Groups

V. P. Medvedev, V. V. Chapurkin, A. V. Murzin, M. A. Vaniev, V. I. Frolova, G. V. Medvedev and I. A. Novakov p. 174  abstract

A Rheological Model of the Influence of Thermal Exposure on the Viscosity of a an LBS-4 Varnish during Impregnation of a Multilayer Woven Blank of a Heat-Protective Coating

V. A. Tarasov, M. A. Komkov, V. A. Romanenkov, R. V. Boyarskaya and D. S. Boyarskii p. 179  abstract

How to Increase Water Resistance of Adhesive Wood Compounds Formed by Adhesives Based on Polyvinyl-Acetate Dispersion

V. A. Voitovich, M. A. Davydova, E. A. Zakharychev, A. S. Knyazev and A. A. Knyazev p. 183  abstract

Adsorption Plastification of Aluminum-Oxide Ceramic Filaments

A. V. Medvedev p. 186  abstract

Accumulation of Electrolytic Hydrogen by Carbon Nanotubes

L. E. Tsygankova, A. A. Zvereva, N. Al’shika, Yu. V. Gavrilov and O. V. Alekhina p. 191  abstract

Quality Control of Structures Made of Composite Materials

Yu. I. Bityukov and Yu. I. Deniskin p. 197  abstract

The Effect of Filler Type on the Mechanical Properties of Composite Materials Based on Ultra-High-Molecular-Weight Polyethylene

V. G. Grinev, V. G. Krasheninnikov, A. S. Zabolotnov, T. A. Ladygina, P. N. Brevnov, L. A. Novokshonova and A. A. Berlin p. 202  abstract

Orientation Effects in Hybrid-Polymer Mixtures

E. V. Stegno, V. M. Lalayan, A. V. Grachev, L. V. Vladimirov, N. G. Berezkina, A. Yu. Shaulov, S. A. Patlazhan and A. A. Berlin p. 209  abstract

A Study of the Properties of Unsaturated Polyketone as a Representative of New-Type Reactive Oligomers for the Development of an Adhesive Composition on Its Basis

O. I. Sidorov, K. A. Dubkov, S. V. Semikolenov, N. E. Evseev, D. A. Belyakov, O. S. Fursova, V. N. Parmon and D. V. Pleshakov p. 215  abstract

Graph Representation of Technological Inheritance in Structures Made of Polymer-Composite Materials

N. I. Baurova, V. A. Zorin and V. M. Prikhod’ko p. 225  abstract

The Effect of Disperse Fillers on the Thermomechanical Characteristics of Epoxy Polymers

V. K. Kryzhanovskii, N. A. Lavrov and Sh. N. Kiemov p. 230  abstract