Vol. 19, No. 1, 2026

Polymer Science, Series D

Compatibilization of Immiscible Polymer Blends with Solid Nanoparticles: Part 1. Morphology (A Review)

A. E. Zaikin p. 1 abstract

The Synthesis of Aromatic Mannich Polyol and a Polyurethane Coating Based on It

S. A. Baltacheva and I. N. Bakirova p. 14 abstract

Effect of the Size of Polymer—Fiber Joints on the Change in Adhesive Strength under Various External Influences: Part 1. Scale Dependence of the Adhesive Strength of Fiber—Thermosetting Binder Joints under Normal Conditions

Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva p. 20 abstract

Silicone Materials Intended for the Protection and Sealing of Microelectronics and Electronic Equipment

O. V. Neelova p. 26 abstract

Obtaining and Investigating the Physical and Mechanical Properties of Binder‑Free Plastics Produced by the “Blow‑Off” Method

A. V. Artyomov, A. E. Shkuro, V. G. Buryndin, and V. E. Tsvetkov p. 40 abstract

The Influence of Organoclay Additive on Properties of Recycled Polyethylene Terephthalate

T. A. Borukaev, R. M. Martazanova, A. Kh. Shaov, and R. A. Kharaeva p. 50 abstract

Influence of Tropical Climate on the Properties of Polyurethane Materials

M. A. Vaniev, D. A. Nilidin, N. V. Sidorenko, Dang Minh Thuy, Phan Gok Tu, D. V. Demidov, and I. A. Novakov p. 56 abstract

Study of the Resistance of Elastomeric Fire‑ and Heat‑Protective Materials to Tropical Climate Conditions

V. G. Kochetkov, V. F. Kablov, N. A. Keibal, D. A. Kryukova, V. A. Drozdev, D. A. Urzhumov, V. M. Emelyanenko, O. M. Novopoltseva, I. M. Myasnikov, M. I. Shesternin, Dang Minh Thuy, Phan Gok Tu, and S. G. Gubin p. 62 abstract

Effect of Polymer–Fiber Joint Size on Adhesive Strength Variations under Different External Conditions: Part 2. Influence of Thermosetting Binder–Fiber Joint Size on Temperature‑Dependent Adhesive Strength

Yu. A. Gorbatkina and V. G. Ivanova-Mumzhieva p. 67 abstract

The Synthesis of Functionalized Water-Based Styrene–Acrylic Copolymers and Preparation of Hybrid Polyurethane–Acrylic Coatings

N. I. Hloba, A. Yu. Balash, A. L. Egorova, and E. T. Krut’ko p. 71 abstract

Compatibilization of Immiscible Polymer Blends Using Solid Nanoparticles: Part 2. Strength (A Review)

A. E. Zaikin p. 81 abstract

Adhesives Based on Chlorosulfonated Polyethylene (A Review)

Kh. S. Abzaldinov, K. B. Vernigorov, V. I. Mashukov, O. A. Potapov, Yu. M. Kazakov, and O. V. Stoyanov p. 94 abstract

Application of Basalt Filler to Enhance the Fire and Heat Resistance of Elastomeric Compositions

N. A. Keibal, V. F. Kablov, D. A. Kryukova, V. G. Kochetkov, D. A. Urzhumov, and V. A. Drozdev p. 100 abstract

Research and Application of Powder Adhesive Facing Technology

G. S. Varankina, A. M. Ivanov, and D. S. Rusakov p. 105 abstract

Study of Interaction Processes of Adhesive and Paint-and-Varnish Materials with a Fire-Retardant Composition on the Veneer Surface

E. G. Sokolova and N. D. Syutkin p. 112 abstract

A New Approach to Increasing the Elasticity of an Epoxy Matrix Applicable in the Development of Modern Adhesives, Sealants, and Flexible Plastics

Yu. Yu. Yakovlev, N. P. Bezrukov, and N. P. Korotkova p. 117 abstract

Experimental Substantiation of the Antioxidant Effect of Carbon-Mineral Filler for Polymer Materials

K. B. Vernigorov, V. V. Bushkov, V. I. Mashukov, S. A. Efremov, S. N. Rusanova, N. E. Temnikova, R. M. Ziyatdinova, Yu. G. Galyametdinov, Yu. M. Kazakov, and O. V. Stoyanov p. 125 abstract

The Influence of Carbonyl Nickel on Rheological Properties of Chlorosulfonated Polyethylene Materials

N. V. Kostromina, Yu. V. Olikhova, N. I. Lukashov, I. Yu. Gorbunova, D. V. Kramarev, N. D. Shesterin, A. N. Kochergin, V. Yu. Pivsaev, and D. S. Kalinovsky p. 130 abstract

A Study of the Wettability of Glass and Basalt Fibers with Test Fluids

I. A. Starostina, R. A. Perelygina, G. V. Malysheva, A. S. Borodulin, A. I. Khasanov, and O. V. Stoyanov p. 136 abstract

Current Trends and Scientific Achievements in the Global Market of Structural Adhesives

D. S. Kralechkin, M. I. Gubanova, I. A. Kirsh, and O. A. Bannikova p. 142 abstract

Additive Manufacturing Technologies for Producing Parts from Thermodynamic Polymers in Low-Volume Production

A. D. Novikov, I. A. Makagonov, E. S. Chaplina, T. A. Guzeva, and G. V. Malysheva p. 152 abstract

Protective Technological Thermal Insulation Coating for Heat-Resistant Nickel Alloys

V. S. Patrusheva, S. V. Gavrilov, T. I. Yanson, and O. V. Kulikova p. 157 abstract

Evaluation of Physical and Mechanical Properties of the Hardfacing Reinforcement Zone of Deep Riper Chisels Depending on the Technological Schemes

I. N. Kravchenko, S. A. Fes’kov, A. A. Gutsan, G. V. Orekhova, and A. K. Anoprienko p. 163 abstract

Manufacturing and Investigation of Unidirectional Polymer Composite Materials Based on Mineral, Chemical, and Plant Fibers

P. A. Medvedev, A. N. Blaznov, Z. G. Sakoshev, E. G. Sakoshev, and V. V. Firsov p. 169 abstract

Heat-Resistant Polymers Based on Epoxy Resins (Review)

S. V. Borisov, N. A. Yaroslavtsev, I. A. Bulatov, D. V. Tolkachev, D. S. Kiselev, S. S. Smirnova, N. T. Fan, M. A. Vaniev, and I. A. Novakov p. 176 abstract

Synergistic Effects of Nonstoichiometric P–N Flame Retardants Based on Melamine and Ammonium Derivatives of Phosphoric Acid: Part 2. Study Results

S. Kh. Toirov, Yu. M. Evtushenko, I. O. Kuchkina, I. V. Bezsudnov, V. A. Ushkov, and A. A. Berlin p. 189 abstract

Using Composite Coatings to Increase the Wear Resistance of Elements Operating under Cavitation Erosion Conditions

S. Yu. Zhachkin, G. I. Trifonov, and P. V. Strunkin p. 197 abstract

Effect of Repeated Injection Molding Recycling of Polypropylene on Its Properties

A. V. Lobanov, A. A. Alekseev, E. A. Korobko, V. S. Osipchik, T. P. Kravchenko, N. G. David’yants, and A. A. Alekseev Jr. p. 202 abstract

Contents

Polymer Science, Series D