Contents

Polymer Science, Series D

---

Vol. 17, No. 1, 2024

---

The Effect of Microwave Radiation on the Technological Properties of Urea–Formaldehyde Glue

S. P. Isaev, O. Yu. Erenkov and K. A. Shevchuk p. 1  abstract

Unsaturated Polyketones—Oligomers of New Type and Polymer Materials Based on Them

O. I. Sidorov, D. A. Belyakov, K. A. Dubkov, S. V. Semikolenov and D. V. Pleshakov p. 5  abstract

The Influence of the Surface Morphology of Plasma-Modified Polymers on Adhesion Characteristics

M. S. Piskarev, A. K. Gatin, A. V. Zinov’ev, A. B. Gil’man and A. A. Kuznetsov p. 22  abstract

Main Components Included in Domestic Epoxy Adhesives (Review). Part III. Fillers, Thixotropic Additives, Fire Retardants

A. P. Petrova, N. F. Lukina, A. Yu. Isaev and O. I. Smirnov p. 26  abstract

Study of the Strength and Water Resistance of Glue Joints Made of Solid Wood

G. S. Varankina, D. S. Rusakov and O. A. Belova p. 35  abstract

The Influence of Epoxy Binder Electric Pulse Pretreatment on Mechanical Properties of Fiberglass

O. Yu. Erenkov, S. P. Isaev, E. P. Dorofeev and E. Kh. Ri p. 41  abstract

A Study of Russian-Made Adhesive Compositions for Gluing Rubber to Metal during the Vulcanization Process Compared with Imported Analogues

N. A. Tretyakova and I. I. Abolskaya p. 46  abstract

Application of Unsymmetrical Ureas as a Catalytic Additive for Curing Epoxy Resins (Review)

G. B. Eldyaeva and A. I. Tkachuk p. 49  abstract

A Study of the Structure Formation of Impregnating Amino-Formaldehyde Resins

M. Yu. Ekimova and V. E. Tsvetkov p. 58  abstract

Ethyl-2-Cyanacrylate Adhesives Modified with Polymer p-Dinitrosobenzene

O. R. Klyuchnikov and N. A. Khramov p. 63  abstract

Approaches to Developing Cold-Cure Polyurethane Adhesives for Gluing Metallic and Nonmetallic Materials

A. Yu. Isaev, A. K. Alekhin and N. F. Lukina p. 67  abstract

Interaction between an Adhesive and a Substrate Affected by Ultrasonic Oscillations

S. K. Sundukov p. 72  abstract

The Relationship between the Cure Rate of Methyl Methacrylate–Macroinitiator Adhesive Composition and the Macroinitiator Composition Obtained by Titanocene Dichloride-Involved Radical-Initiated Polymerization

K. A. Tereshchenko, D. A. Shiyan, N. V. Ulitin, A. V. Bekker, E. M. Sabitova, A. A. Osipov, V. P. Bondarenko, S. V. Kolesov and O. V. Stoyanov p. 79  abstract

Characteristics of Film Adhesive of VK-105 Brand Designed for Manufacture of Parts for Structural Purpose

K. N. Moskvitina, A. I. Tkachuk, K. A. Afanas’eva and Ya. M. Gurevich p. 90  abstract

Welding Parts from Thermoplastic-Based Polymer Composite Materials. Part 1. General Issues in Welding Parts from Thermoplastic Materials

I. S. Nefelov and N. I. Baurova p. 97  abstract

Fire Retardants for Polymer Materials

V. V. Seliverstov and A. S. Knyazev p. 101  abstract

A Study of the Strength Properties of Carbon-Fiber-Reinforced Plastics with a Two-Phase Reinforcement Scheme

E. A. Kosenko, V. A. Nelyub and N. I. Baurova p. 106  abstract

Physical and Mechanical Properties of Polybutylene Terephthalate Stabilized with Various Antioxidants

T. A. Borukaev, Z. M. Lukyaeva and A. Kh. Salamov p. 110  abstract

Influence of Extrusion Temperature and Post-Treatment Conditions on the Strength Characteristics of ABS Plastic Samples in Vertical FDM Printing

A. S. Shestakov, A. S. Filimonov, D. D. Batyzhev and A. R. Potkin p. 116  abstract

Prediction of Rheological Parameters of Polymers Using the CatBoost Gradient Boosting Algorithm

A. S. Chepurnenko, T. N. Kondratieva, T. R. Deberdeev, V. F. Akopyan, A. A. Avakov and V. S. Chepurnenko p. 121  abstract

Modeling of Thermal Aging of a Cable Polymer Composition Based on Ethylene Vinyl Acetate

D. I. Bolotina, A. I. Kononenko, A. L. Pomerantsev and A. G. Tsikanin p. 129  abstract

The Influence of Microwave Radiation on the Deformation-Strength Properties of a Polyurethane Binder Based on the PDI-3B Oligomer

E. Nurullaev, L. L. Khimenko, A. N. Kozlov, E. M. Ibragimova, V. Yu. Senichev and M. V. Perepada p. 136  abstract

Aromatic Polysulfones: Synthesis, Properties, and Their Application. A Review

N. E. Temnikova and O. V. Stoyanov p. 140  abstract

Studying the Effect of Torrefaction on the Carbohydrate Components of Birch and Pine Wood

S. A. Pushkin, A. N. Grachev, A. A. Makarov, R. M. Khaziakhmedova, V. N. Bashkirov and S. A. Zabelkin p. 149  abstract

An Air-Impact Method for Mechanochemical Activation of Secondary Raw Materials in the Production of Building Materials

I. N. Kravchenko, M. N. Erofeev, S. A. Velichko, A. S. Apatenko and S. V. Abramov p. 154  abstract

Influence of UV Radiation on Degradation of Composites Based on Low-Density Polyethylene with Biodegradable Additives

M. V. Podzorova, I. A. Var’an, Yu. V. Tertyshnaya, N. N. Kolesnikova, A. A. Popov and Z. R. Abushakhmanova p. 160  abstract

Strengthening Polypropylene with Ultra-High-Molecular-Weight Polydecene

T. I. Medintseva, V. I. Solodilov, L. A. Rishina, S. S. Lalayan, O. P. Kuznetsova, E. V. Prut and A. A. Berlin p. 167  abstract

The Rheological Properties of Particulate-Filled Thermoplastics in New Reduced Structural Parameters

I. D. Simonov-Emelyanov and A. A. Pykhtin p. 172  abstract

Fibers and Filaments from Polylactic Acid: Production Features, Structure, and Physical–Mechanical Properties

E. E. Mastalygina, M. V. Podzorova, P. V. Pantyukhov and A. A. Popov p. 181  abstract

Analysis of the Effectiveness of the Evaluation Method of Wear Resistance of Paint and Varnish Coatings Using a High-Speed Jet Liquid

A. L. Galinovskii, A. A. Mikhailov, D. A. Martysyuk, A. I. Plokhikh and S. V. Bochkarev p. 187  abstract

The Present and Future of Smart Materials and Smart Clothing

V. V. Getmantseva and M. S. Ivanova p. 194  abstract

A Comparative Analysis of the Results of Granulometric Analysis of Powder Materials Produced in the EU and PRC Used in Selective Laser Melting Technology

A. L. Galinovskii, D. A. Martysyuk, E. D. Katkova, O. G. Kozhus and A. I. Dolgikh p. 199  abstract

Nontrivial Radiation Monitoring Problems Solved by X-ray Computed Tomography

O. A. Krupnina, A. A. Demidov, N. A. Mikhailova and E. I. Kosarina p. 205  abstract

Destruction Features of Porous Materials

V. A. Skryabin p. 211  abstract

Compaction of Porous Powder Materials through Plastic Deformation

V. A. Skryabin p. 215  abstract

The Effect of the Structural Features of a Heat-Resistant Glass–Ceramic Coating on Its Properties

O. V. Vlasova, V. S. Denisova, S. V. Gavrilov and A. B. Agarkov p. 219  abstract

---