Contents

Polymer Science, Series D

Vol. 15, No. 1, 2022

Adhesion Mechanics. Estimation of Contact-Layer Parameters

R. A. Turusov p. 1  abstract

A Composite of Layered Structure. Transversal Strength and Young’s Modulus

R. A. Turusov, V. I. Andreev and N. Yu. Tsybin p. 10  abstract

Adhesive Features of Functionalized Metal–Polymer Systems Based on Polyolefins

N. T. Kakhramanov, Kh. V. Allahverdieva and N. S. Koseva p. 19  abstract

The Influence of Aluminum-Silicate Microspheres on Adhesion and Heat-Protection Properties of Elastomer Materials

V. F. Kablov, O. M. Novopol’tseva, N. A. Keybal, V. G. Kochetkov and A. I. Zalybina p. 25  abstract

The Mechanism of the Initial Stage of Synthesis of Polydopamine

A. V. Varankin, A. A. Artyukhov, M. I. Shtil’man and Ya. O. Mezhuev p. 30  abstract

Binders Based on Mixtures of Epoxy Polymers and Thermoelastoplasts. Part 2. Physical and Mechanical Properties of Epoxy Polymers Modified by Polybutadieneterephtalate–Polytetramethyleneoxide Block Copolymers

Yu. S. Kochergin, T. I. Hryhorenko and Wu Yiqi p. 35  abstract

Foreign Conductive Adhesives, Testing Methods, Properties, and Application. Review

K. L. Besednov, A. P. Petrova, N. F. Lukina and A. Yu. Isaev p. 40  abstract

Properties of Composites Based on Melamine–Formaldehyde Binding Agents

V. E. Tsvetkov, A. A. Nikitin, Yu. A. Semochkin, N. N. Tsvetkova and O. P. Machneva p. 49  abstract

Comparison of Techniques for Adhesive Properties Measuring of Polymer Films Modified by Plasma

M. S. Piskarev, A. V. Zinoviev, A. S. Kechek’yan, A. B. Gilman and A. A. Kuznetsov p. 54  abstract

A Method for Removing a Preserving Polymer Coating from Archeological Metal Objects

I. A. Starostina, R. Kh. Khramchenkova and O. V. Stoyanov p. 57  abstract

Improvement of the Construction of a Glued Panel Parquet with an Increase in Its Handling

A. R. Birman, A. A. Tambi, S. A. Ugryumov and N. A. Belonogova p. 60  abstract

Modern Liquid Embolization Agents Based on Polymers: Composition, Characteristics, and Areas of Application. Review

D. V. Reshetnyak, E. S. Zhavoronok, O. A. Legon’kova, A. S. Ogannisyan, A. V. Panov and S. A. Kedik p. 64  abstract

Rubber and Rubber–Polymer Modifiers of Asphalt–Concrete Mixes Prepared by High-Temperature Shear-Induced Grinding. Part 3. Evaluation of Effectiveness of Modification

A. A. Berlin, V. G. Nikol’skii, I. A. Krasotkina, T. V. Dudareva, V. N. Gorbatova, I. V. Gordeeva, A. V. Sorokin, V. A. Lobachev, S. I. Dubina and M. Yu. Sinkevich p. 71  abstract

Characteristics of Glass–Fiber-Reinforced Plastics Based on Binders with Decreased Curing Temperature

E. D. Kolpachkov, Yu. M. Gurevch, A. O. Kurnosov, P. S. Marakhovskii and A. P. Petrova p. 79  abstract

The Theoretical Basis of Mechanics of Polymer Composites for FDM-Printing Technologies

F. V. Svoikin, V. F. Svoikin, S. M. Bazarov, S. A. Ugryumov and A. R. Birman p. 83  abstract

Estimate of the Effect of Ethylene Vinyl Acetate on Technological and Deformation Properties of Silane-Based Cross-Linked Polyethylene

S. A. Klyushnikov, V. A. Shishkinskaya, V. S. Osipchik, T. P. Kravchenko, O. I. Kladovshchikova and A. N. Pachina p. 87  abstract

Determination of the Influence of the Working Environment on the Development of Underfilm Corrosion of Machine Parts with Dispersed-Filled Polymer Coatings

V. A. Gabysheva and N. I. Baurova p. 90  abstract

Dielectric Characteristics of Structural Organoplastics

P. M. Shul’deshova, G. F. Zhelezina, N. A. Solov’eva and E. M. Shul’deshov p. 96  abstract

Aging of Basalt Plastics in Open Climatic Conditions

O. V. Startsev, M. P. Lebedev and A. K. Kychkin p. 101  abstract

Synthesis of Polymethyl-Methacrylate–Collagen-Graft Copolymer Using a Complex Oxide RbTe1.5W0.5O6 Photocatalyst

L. L. Semenycheva, V. O. Chasova, D. G. Fukina, A. V. Koryagin, N. B. Valetova and E. V. Suleimanov p. 110  abstract

Hydrophilic Rubber Based on Butadiene–Nitrile Rubber and Phytogenic Powdered Cellulose

E. N. Cherezova, Yu. S. Karaseva and K. S. Momzyakova p. 118  abstract

The Influence of the Composition of Polyethylene, Starch, and Monoglyceride Biodegradable Compositions on Their Physicomechanical Properties and Structure

I. Yu. Vasil’ev, V. V. Anan’ev, Yu. M. Sultanova and V. V. Kolpakova p. 122  abstract