Vol. 14, No. 1, 2021

Polymer Science, Series D

Adhesion Properties of Adhesive Joints of Polymer Films Modified by Direct-Current Discharge

M. S. Piskarev, A. V. Zinov’ev, A. S. Kechek’yan, A. B. Gil’man and A. A. Kuznetsov p. 1 abstract

The Effect of the Dynamic Viscosity of an Epoxide Compound on the Properties of Foam Materials Obtained on Its Basis

M. B. Alikin, D. A. Panfilov, N. A. Lavrov, I. M. Dvorko, Yu. V. Polyakova and G. E. Litosov p. 4 abstract

An Estimation of Adhesive Interaction of Polymer Coatings with Metals Using the van Oss–Chaudhury–Good Equation

I. A. Starostina, M. V. Kolpakova and O. V. Stoyanov p. 8 abstract

Aminoformaldehyde Oligomers Modified with Salts of Polyfunctional Acids

M. Yu. Ekimova, V. E. Tsvetkov and O. P. Machneva p. 13 abstract

The Effect of the Concentration of Components and Dispersion of Particles of Filler of Epoxy–Sand Composite on Hardness and Its Relationship with Abrasive Wear Resistance

A. M. Mikhal’chenkov, A. S. Kononenko, A. A. Tyureva and I. V. Kozarez p. 17 abstract

Rheological Characteristics of Epoxy Oligomers with Laproxide and Laprolate Reactive Diluents

Ya. A. Nagornaya, D. A. Trofimov, S. I. Shalgunov, I. D. Simonov-Emel’yanov and V. I. Sokolov p. 21 abstract

Evaluation of Properties of Weld-Bonded Joints Using Similarity Constants

A. Yu. Konoplin and N. I. Baurova p. 29 abstract

Using Sealants for Gluing Dissimilar Materials

A. P. Petrova, N. F. Lukina, A. K. Alekhin and Ya. A. Bryk p. 34 abstract

The Use of Multipurpose Modifiers in Adhesive Compositions Based on Chloroprene Rubber to Increase Thermal Stability

N. A. Keibal, V. F. Kablov, V. V. Ismailov and V. S. Sakhnova p. 38 abstract

The Effect of Carbon Black on Characteristics of Nonhardening Sealants Based on Butyl Rubber

R. Yu. Galimzyanova, M. S. Lisanevich and Yu. N. Khakimullin p. 42 abstract

The Effect of Additional Heat Treatment at High Temperatures on Physicomechanical Properties of OFRPs Based on Epoxy Matrixes

R. A. Korokhin, P. A. Povernov, I. Yu. Gorbunova and Yu. A. Gorbatkina p. 47 abstract

Achievements in Improving Thermal Properties of Anaerobic Adhesives. Review

D. A. Aronovich p. 52 abstract

Naturelike Materials and Structures in Mechanical Engineering

E. A. Kosenko, N. I. Baurova and V. A. Zorin p. 69 abstract

Modification of Cotton Cellulose with Sterically Hindered Phenolic Fragments

S. V. Bukharov, Yu. M. Sadykova, T. E. Umarov, A. R. Burilov, G. N. Nugumanova, K. S. Momzyakova, T. R. Deberdeev and R. Ya. Deberdeev p. 73 abstract

Complexation in a Monomer–Monomer System upon Copolymerization of 2-Hydroxyethyl Methacrylate with Acrylic Acid

N. A. Lavrov p. 77 abstract

A Method for Evaluating the Change of Matrix Characteristics in Bulk Polymer Composites

E. A. Veshkin, V. I. Postnov and V. V. Semenychev p. 80 abstract

The Effect of Low Concentrations of Carbon Nanotubes on Properties of Poly(3-Hydroxybutyrate) Ultrafine Fibers

O. V. Staroverova, A. A. Olkhov, E. L. Kucherenko, A. A. Burmistrov and A. L. Iordanskii p. 86 abstract

Using Transparent Conducting Coatings for Warming Transparent Roofs

A. A. Mel’nikov, P. A. Shchur, L. V. Solov’yanchik and S. V. Kondrashov p. 93 abstract

Evaluation of the Nonuniform Difference of Freely Formed Products with Unconventional Configuration

S. I. Antonov, A. E. Sheryshev and M. A. Sheryshev p. 97 abstract

Relaxation State of Wood and Production of Cellulose Composites for Energy Purposes: Wood Briquettes and Pellets

E. L. Akim, A. A. Pekarets, S. Z. Rogovina and A. A. Berlin p. 102 abstract

The Behavior of Linear Polyesters in Model Conditions of Bile Ducts

O. A. Legon’kova, M. M. Grigor’ev, T. I. Vinokurova, L. A. Marinova, A. V. Zhao, S. Yu. Lavrent’ev, A. V. Chentsov, N. G. Solov’ev and D. S. Lisovenko p. 106 abstract

The Effect of the Technology of Winding Electrical Insulating Cylinders on the Properties of a Composite Material

N. Yu. Lysov, M. P. Kokurkin, V. A. Lavrinovich, V. A. Maslov, A. L. Panin, A. A. Panov, A. V. Patsino, K. A. Artamonov and V. I. Zhun’ p. 112 abstract

Decision-Making for Implementing Industrial Safety Principles in Large Power Engineering Systems

Yu. V. Kolotilov, A. Yu. Plotnikov, Sh. K. Sheikhgasanov and A. A. Kovalev p. 116 abstract

Biodegradation of Synthetic Thermoplastic Polymers and Plastics Based on Them (Review)

D. V. Sevast’yanov, M. I. Daskovskii, E. A. Shein, S. Yu. Skripachev, Z. Usagava, G. P. Avilleira and M. G. Batista p. 119 abstract

Contents

Polymer Science, Series D