Vol. 10, No. 1, 2017
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Polymer Science, Series D ISSN 1995-4212.
New Alternative to Liquid Thiokol in Commercial Sealants
p. 1 abstract
Glue for Joints and Repair of Elements of Graphite Molds
p. 4 abstract
Green Chemistry of Polyurethanes
p. 9 abstract
A Study of the Performance Properties of Oligoetheracrylate Binder Cured by Coherent UV Radiation
p. 13 abstract
Viscous Hysteresis in Filled Siloxane Binders
p. 19 abstract
Synthesis of Rutile Titanium Dioxide from Russian Raw Materials
p. 23 abstract
Transparent Polymeric Materials with Elevated Adhesion to Silicate Glass and Fire Resistance
p. 28 abstract
Properties of Polymers while Hardening Epoxy Resins with Polyam BS-5
p. 31 abstract
A Study of the Curing Process of Compounds Based on an Epoxy Oligomer ED-20 and Metaphenylene Diamine
p. 36 abstract
One-Package Epoxy Adhesive Materials with High Heat Resistance
p. 40 abstract
Amine Curing Agents Based on 4,4'-Methylene Bisaniline for Epoxy Binders
p. 45 abstract
The Effect of Activated Fillers on the Properties of Styrene–Acrylic Adhesives
p. 50 abstract
Adhesion of Linear Low-Density Polyethylene and Oligomers
p. 55 abstract
The Influence of the Length and Concentration of Chopped Carbon Fiber on Physical and Mechanical Properties of Siloxane Matrix
p. 59 abstract
A Study of the Elastic Properties of Winding Composites of Unidirectional Structures with the Use of the Resonance Method
p. 62 abstract
Regularities of Formation of Emboli of Liquid Polymer Solutions in Aqueous Medium
p. 68 abstract
Thermal Gravimetric Analysis of Decomposing Polymeric Penocom Foamed Composite
p. 74 abstract
Advantages and Commercial Application Problems of Vacuum Carburization
p. 79 abstract
Prospects for the Use of Fluidized-Bed Devices for Production of Coatings
p. 84 abstract
Development of a Two-Matrix Composite Material Fabricated by 3D Printing
p. 87 abstract
Properties of Joints Based on Honeycomb Structures Made Using Adhesive Prepregs
p. 91 abstract