Contents

Physical Mesomechanics

Vol. 29, No. 4, 2026

REVIEW PAPER

Laser Powder Bed Fusion of Precipitation–Hardened Martensitic 17–4 PH Steel: A Critical Review of the Scientific Literature

I. S. Zuiko, P. D. Dolzhenko, S. I. Borisov, Yu. I. Tkacheva, A. A. Kalinenko, I. S. Nikitin, A. E. Fedoseeva, S. Yu. Mironov, and R. O. Kaibyshev p. 565  abstract

RESEARCH PAPER

Rheological Behavior and Structure of a Bioresorbable Zn-Li Alloy under Uniaxial Compression and ECAP Processing

R. N. Asfandiyarov, D. A. Aksenov, A. R. Sirazeeva, A. R. Khasanova, B. O. Bolshakov, and O. B. Kulyasova p. 600  abstract

High–Temperature Flow Stress Prediction of Ti–5Al–4Mo–6V–2Nb–1Fe Alloy by Phenomenological and Physically Based Constitutive Modeling

Bom Hae Ri, Song Il Jo, Kyong Ho Sim, and Il Hyok Kim p. 617  abstract

The Effect of Gd Content on α-Grain Growth in γ-TiAl Based Alloys

V. S. Sokolovsky, P. V. Panin, and G. A. Salishchev p. 632  abstract

Vibration Response of Functionally Graded Sandwich Spherical Nanoshells with Thickness–Dependent Nonlocality

Pham Van Vinh, Le Quang Huy, Rossana Dimitri, and Francesco Tornabene p. 640  abstract

Effect of the Load–Bearing Capacity of the Coating/Substrate System on the Failure Resistance of Ti-Al-Ta-Si-N Coatings under Scratch Testing

A. R. Shugurov and E. D. Kuzminov p. 657  abstract

Micromechanical Analysis of Anisotropic Elastic Response of Additively Manufactured Stainless Steel

V. Romanova, M. Pisarev, V. Mukhin, E. Dymnich, E. Emelianova, V. Shakhidzhanov, V. Balokhonov, and R. Balokhonov p. 671  abstract

Investigation of the Elastoplastic Properties of Additively Produced Metamaterials Based on the Biocompatible Ti6Al4V Alloy

L. B. Maslov, A. I. Borovkov, L. S. Nezhinskaya, M. A. Zhmaylo, and F. D. Tarasenko p. 684  abstract

Effect of High–Temperature Annealing on the Structure and Properties of TiB/TiAl/Ti Layered Composite Material Obtained by Free SHS Compression

A. D. Bazhina, A. P. Chizhikov, M. S. Antipov, A. S. Ivanov, N. Yu. Khomenko, and P. M. Bazhin p. 713  abstract

Effect of External Curing Pressure on the Thickness and Elastic Properties of the Interphase in a Fiberglass Plastic Composite

A. S. Smirnov, E. O. Smirnova, V. S. Kanakin, and I. A. Spirina p. 725  abstract

Numerical Simulation of Dominant Fracture Mechanisms in a Nickel-Based Alloy XH73M within the Phase Field Approach

R. M. Khamidullin and A. V. Tumanov p. 741  abstract

The Behavior of the Al0.5CoCrNiNb0.5 Eutectic High–Entropy Alloy during High–Temperature Oxidation

O. V. Samoilova, S. E. Pratskova, M. V. Sudarikov, N. A. Shaburova, and E. A. Trofimov p. 759  abstract

The Influence of Ion–Plasma Nitriding Temperature on Microstructure and Microhardness of High–Entropy Cantor Alloy

S. V. Astafurov, G. G. Maier, E. A. Zagibalova, E. V. Melnikov, L. V. Danilova, A. S. Nifontov, A. V. Luchin, and M. A. Lysunets p. 771  abstract