Contents

Physical Mesomechanics


Vol. 26, No. 1, 2023


Determination of Fatigue Failure Parameters from the Depth of Plastic Zones Beneath the Fracture Surface

G. V. Klevtsov, L. R. Botvina, N. A. Klevtsova, R. Z. Valiev, and I. N. Pigaleva p. 1  abstract

Rolling Contact Fatigue Damage in Welded Rail Steel Joints

E. V. Torskaya, I. G. Goryacheva, T. I. Muravyеva, O. O. Shcherbakova, I. Yu. Tsukanov, A. R. Meshcheryakova, I. V. Shkaley, K. L. Zagranichek, S. M. Zakharov, and E. A. Shur p. 7  abstract

Fracture Analysis of a 3D-Printed ABS Specimen: Effects of Raster Angle and Layer Orientation

A. Nabavi-Kivi, M. R. Ayatollahi, S. Schmauder, and M. R. Khosravani p. 19  abstract

Temperature Distribution within the Friction Stir Welding Tool

S. Yu. Mironov p. 33  abstract

Phase Formation in Reactive Sintering with Reduction

E. N. Korosteleva, A. G. Knyazeva, and I. O. Nikolaev p. 39  abstract

Spall Strength of 09CrNi2MoCu Steel Manufactured by Hot Rolling and Direct Laser Deposition in the Submicrosecond Loading Range

S. V. Razorenov, G. V. Garkushin, A. S. Savinykh, and O. G. Klimova-Korsmik p. 48  abstract

Analytical Approach to Dynamic Shear Load-Carrying Capacity for Brittle Materials

X. Yang, Z.-C. Ou, C. Yan, Z. Duan, and F. Huang p. 56  abstract

Estimation of Mixed-Mode I/II Fracture of U-Notched Polycarbonate Specimens Using the TCD and SED Methods

J. Albinmousa, J. AlSadah, M. A. Hawwa, and H. M. Al-Qahtani p. 66  abstract

Mesostructure of a Tectonic Fault Slip Zone

G. G. Kocharyan, and A. A. Ostapchuk p. 82  abstract

Modeling of Bionically Inspired Antifriction and Connective Layers in a Joint Prosthesis

S. V. Shil’ko, D. A. Chernous, and S. V. Panin p. 93  abstract

Effect of Ultrasound on the Interface Morphology and Strength of Ti/Al Alloy Joints Produced by Friction Stir Welding

S. A. Ermakova, A. A. Eliseev, E. A. Kolubaev, and D. V. Ermakov p. 100  abstract