Vol. 123, No. 5, 2022
On the Theory of Interdiffusion in Ternary Alloys
p. 425 abstract
On the Theory of Interdiffusion in Ternary Alloys: Concentration Dependences of Kinetics-Related Coefficients
p. 432 abstract
Numerical Study of Nucleation and Solidification Processes in a Modified Melt
p. 439 abstract
Polarization Eigenchannels in a Magnetic Uncorrelated Disordered Medium
p. 447 abstract
Investigation of Electronic States and Magnetic Domain Structure of La1 – xSmxMn2Si2 (x = 0, 0.25) Layered Intermetallic Compounds by Resonant Photoemission Spectroscopy and Magnetic Force Microscopy
p. 451 abstract
On the Effect of the Oxidative Milling of Matrix Powder on the Structure and Properties of Aluminum Foam Based on the Al–12Si Alloy
p. 459 abstract
Structure and Properties of Al–4.5Mg–0.15Zr Compositions Alloyed with Er, Y, and Yb
p. 466 abstract
Influence of Secondary Quasicrystalline I-Phase Precipitates on the Grain Structure and Mechanical Properties of the Al–Mg–Mn Alloy
p. 474 abstract
Calorimetry and Peculiarities of Reverse ω → α Phase Transformation in Zr and Ti Pseudo-Single Crystals
p. 482 abstract
Effect of Thermal Aging for up to 22 Thousand Hours on the Structural and Phase State of Ferritic–Martensitic Steels EK181 and ChS139
p. 489 abstract
Melt Cooling Rate Effect on the Microstrucutre of Al–Si Alloy Doped with Mg, Mn, Fe, Ni, and Cu
p. 500 abstract
Formation Processes of the α + α2 Structure in Model Pseudo-α-Titanium Alloys
p. 507 abstract
Evolution of Phase Composition and Durometric Characteristics in the Refractory Titanium Ti–6.4Al–3.5Zr–2.6Sn–1Nb–0.6Mo–2Si Alloy under Aging
p. 513 abstract
Shock-Wave Loading and Spall Fracture of Textured Tungsten Samples: Experiment and Simulation
p. 520 abstract
Development of Radiation Porosity in the Material of Fuel-Element Cladding Produced by Different Technologies for Fast Neutron Reactors and Its Influence on the Fuel Assembly Service Life in the BN-600 Reactor
p. 528 abstract
Structure and Impact Strength of Weld Joints Manufactured from a Pipe Steel with the Use of Hybrid Laser-Arc Welding
p. 535 abstract