Contents

The Physics of Metals and Metallography

---

Vol. 123, No. 14, 2022

---

Structure, Phase Transformations, and Diffusion

Microstructure, Wear and Corrosion Resistance of AlNi₂Ti–Ti₂Ni–NiTi Intermetallic Alloy

H. X. Zhang p. 1419  abstract

Comparison of Thermodynamic Parameters and Corrosion Behaviors of Ti₅₀Ni₂₅Nb₂₅ and Ti₅₀Ni₂₅Ta₂₅ Shape Memory Alloys

S. S. Mohammed, E. Balci, F. Dagdelen and S. Saydam p. 1427  abstract

Effect of Aging Applied with the Ultra-Low Heating Rate after CRYO Treatment on the Corrosion Resistance of Metastable β Titanium Alloy’s

N. Yumak and Y. Kayali p. 1436  abstract

Analysis of Erosion Wear on High Chrome Cast Iron Through Taguchi Approach

Mohit Makwana and B. M. Sutaria p. 1443  abstract

---

Strength and Plasticity

Effect of Cyclic Quenching on the Austenite Stability and Work Hardening Behavior of Medium-Mn Quenching and Partitioning Steel Enabled by Intercritical Annealing

L. Liu, B. R. Shan, Z. H. Zhang, T. T. Li, S. Z. Zhao, C. N. Jing, T. Lin and J. R. Zhao p. 1451  abstract

Shape Recovery and Mechanical Properties of Hot-Rolled Fe–17Mn–5Si–5Cr–4Ni–0.1C–0.2Ti Shape Memory Alloy for Linear Actuator Application

Dohyung Kim, Kinam Hong, Jeonghoon Lee, Wookjin Lee and Yongho Park p. 1461  abstract

Prediction Flow Behaviour of a Magnesium Alloy in Hot Deformation and a Comparative Study by Using Hyperbolic Sine Model and ANN Model

Qiumin Xie, Yunxin Wu, Shunli Peng and Zhongyu Yuan p. 1471  abstract

Effect of Aging Treatment on Mechanical Properties of New Type of Medical β Titanium Alloy

Xu Ying, Zhao Sitan, Cai Yanqing and Xia Pengzhao p. 1479  abstract

Effect of Solution and Aging Treatment on Microstructure and Properties of AZ31B Magnesium Alloy Laser Welded Joint

Yulang Xu, Peng Qian, Jingyong Li, Yanxin Qiao, Jinshen Zhang and Jian Liu p. 1491  abstract

Effect of Heat Treatment on the Mechanical Properties and Corrosion Behaviour of Al–Si–Mg Alloy Systems

Yusuf Kaygısız and Didem Balun Kayan p. 1499  abstract

Effect of Mean Stress on Ratcheting of Austenitic Stainless Steel (AISI 304) at Room Temperature

Saikat Ranjan Maity, Sunil Kumar and Lokeswar Patnaik p. 1509  abstract

Microstructure and Mechanical Properties of FeCo45 Stainless Steel Fabricated by Laser Melting Deposition

Tianqi Wang, Buyun Zheng, Di Zhao and Yan Fang p. 1518  abstract

Numerical Simulation of Continuous Quenching and Tissue Evolution of Slender Rod Parts

K. P. Huang and F. Z. Wang p. 1527  abstract

A High Strength and High Conductivity Cu0.4Cr0.3Zr Alloy Prepared by Cryo-ECAP and Heat Treatment

Guo Tingbiao, Qian Danchen, Huang Dawei, Wang Junjie, Li Kaizhe and Ling Dekui p. 1537  abstract

Effect of Water Spray Quenching on Microstructure and Wear Resistance of Grinding Balls

Zhixin Liu, Yu Liu, Zhaoyang Song and Baoqi Wang p. 1548  abstract

Comparative Study on Microstructure and Properties of the Cr–Mn–Ni Stainless Steel and the Cr–Ni Stainless Steel

Peng Tang, Qian-nan Liu and Xue-xuan Yang p. 1557  abstract

---