Contents

Physics of Metals and Metallography

Vol. 125, No. 13, 2024

ELECTRICAL AND MAGNETIC PROPERTIES

Method of Magnetic Control of Percentage of Ferrite and Strain-Induced Martensite in Stainless Steels

M. K. Korkh, M. B. Rigmant, A. V. Kochnev, and Yu. V. Korkh p. 1501  abstract

STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

On the Strengthening Mechanism in Lath Martensite of As-Quenched Fe–Ni Alloys

T. Y. Zeng, and Z. R. Luo p. 1510  abstract

Explore on the Mechanism of Action between Al2O3–SiO2 Refractory Materials and Rare Earth High Carbon Heavy Rail Steel

Yi Wang, Guangjie Song, Jianzhong He, and Jianxun Fu p. 1519  abstract

Molecular Dynamics Study on Drilling Performance and Cutting Behavior of Fe–Bi Free-Cutting Steel

Hongbo Wang, Fazhan Wang, Minggang Wang, Jingcheng Zhang, Shucheng Wang, and Yixuan Wang p. 1529  abstract

Optimization of Selective Laser Melting Process for Maraging 300 Steel: Investigation the Impact of Parameters on Porosity, Microstructure, and Mechanical Properties

Orhun Arslan, Ali Ari, Ali Bayram, and Tolga Konukçu p. 1540  abstract

Deformation Microstructure and Property Control of CuCrZr Alloy Directionally Solidified at Room Temperature C-ECAP

Guo Tingbiao, Wang Huan, Qian Danchen, Gao Yang, Feng Rui, Ding Weitong, Xin Chan, Zhang Guoqing, and Ling Dekui p. 1557  abstract

Effect of the Concentration of PVP Capping Agent on Silver Nanowires Synthesized via CuCl2⋅2H2O Mediated Polyol Route

Virendra Singh, Chaitanya Chauhan, Neeraj Singh, Arvind Kumar, Diwakar Padalia, and Shri Ram p. 1569  abstract

Hf–Mo–Si–B Oxidation-Resistant Coatings Produced by Magnetron Sputtering in DCMS and HIPIMS Modes

Ph. V. Kiryukhantsev-Korneev, A. D. Chertova, F. I. Chudarin, X. Ren, P. Feng, and E. A. Levashov p. 1578  abstract

Effect of Reactive Magnetron Sputtering Modes (DCMS, HIPIMS, and DC + HIPIMS) on the Properties of Copper Oxide Films

V. A. Semenov, S. V. Rabotkin, A. S. Grenadyorov, A. A. Solovyev, V. O. Oskirko, A. N. Zakharov, and A. V. Shipilova p. 1593  abstract

The Effect ECAP Processing Routes on the Microstructure and Mechanical Properties of AISI 316 Austenitic Stainless Steel

K. Hajizadeh, and K. J. Kurzydlowski p. 1601  abstract

Y–Al–O Coating Grown on Inconel 718 Alloy

A. A. Maslov, A. Yu. Nazarov, A. M. Khusainova, and K. N. Ramazanov p. 1609  abstract

Application of Electron-Beam Synthesis for Producing a Film/Alloy/Substrate System

E. A. Pesterev, A. V. Solovyov, E. V. Yakovlev, V. I. Petrov, and A. B. Markov p. 1615  abstract

Effect of Sb and Al–3P Complex Modification on Solidified Microstructure and Mechanical Property of Hypereutectic Al–18Si Alloys

Xuan Yan, Changjun Wu, Haoping Peng, Ya Liu, Jianhua Wang, and Xuping Su p. 1620  abstract

Influence of Cu Alloying on the Microstructure and Properties of the Al–Fe Alloy, Produced by Electromagnetic Casting and Subjected to Equal-Channel Angular Pressing

A. E. Medvedev, O. O. Zhukova, V. U. Kazykhanov, A. F. Shaikhulova, M. M. Motkov, V. N. Timofeev, N. A. Enikeev, and M. Yu. Murashkin p. 1629  abstract

Investigation on the Properties of Anodic Oxides Formed on Aluminium–Silicon Alloys Irradiated by Pulsed Electron Beam

A. Lucchini Huspek, B. Akdogan, Yu. H. Akhmadeev, E. A. Petrikova, Yu. F. Ivanov, P. V. Moskvin, N. N. Koval, and M. Bestetti p. 1638  abstract

Status of Research on Assisted Laser Cladding and Laser Cladding Posttreatment: A Review

Qiaofeng Bai, Chao Chen, Qihang Li, Chunjiang Zhao, and Jian Zhang p. 1648  abstract

Modification of the Structure, Phase Composition, and Properties of an Intermetallic-Matrix Composite by Low-Energy High-Current Electron Beam Irradiation

K. V. Ivanov, K. O. Akimov, and M. G. Figurko p. 1664  abstract

Study on Refining Grain and Microalloying Effect of Al–5Er Master Alloy

Z. G. Lei, S. P. Wen, G. Yang, J. R. Ma, H. Huang, and Z. R. Nie p. 1672  abstract

Influence of Pico-Laser Texturing Treatments on Wetting Morphology and Interfacial Bonding Mechanism of Ni–Co Alloy with Borosilicate Glass

Chen Changjun, Shao Jiaqi, Shen Jiajia, and Zhang Min p. 1680  abstract

Oxidation Behavior of a Ti–Al–C + Y–Al–O Two-Layer Coating

K. N. Ramazanov, A. A. Maslov, A. Yu. Nazarov, and A. A. Nikolaev p. 1693  abstract

Exploring the Corrosion Performance of AZ31 Magnesium Alloy under Acidic and Alkaline Conditions

H. Azzeddine, A. Hanna, and A. Dakhouche p. 1699  abstract

Effect of Initial Microstructure on Austenite Grain Size of Niobium Microalloyed Steels

Haiqing Wang, Minghao Shi, Lian Hou, Chaokun Yin, and Man Di p. 1707  abstract

STRENGTH AND PLASTICITY

Hot Deformation Behavior and Thermal Processing Map of 630°C Ultra-Supercritical Rotor Steel

Yu-jiao Ke, Chen-jing Li, Yin-xian Li, Da-peng Gu, Wen-wen Xu, Tian-ye Li, and Xin-gang Liu p. 1718  abstract

Prediction of Mechanical Properties of Hot-Rolled Strip Steel Based on XGBoost and Metallurgical Mechanism

Li Ming, Li Guiqin, Li Xihang, Lu Lixin, and Peter Mitrouchev p. 1728  abstract

Mechanical Property of MxN (M = Fe, Cr) Nitrides in Nitriding Process of 1Cr11NiW2MoV Stainless Steel: First-Principles Calculation

R. J. He, S. Zhu, X. Han, H. Y. Zhang, G. F. Li, and P. Peng p. 1739  abstract

Fractographical Insight into Heat-Treated Low Carbon Microalloyed API X65 Steel Fracture Mode

S. Fida Hassan, and H. AlWadei p. 1751  abstract

Effect of Addition of Rare Earth Metal (Ce) on the Microstructure, Mechanical Properties and Corrosion Behavior of NiTi Alloys

Fahad Riaz, Tahir Ahmad, Muhammad Kamran, and Muhammad Umar Manzoor p. 1761  abstract

Atomistic Simulations of Cu–Ag Bicrystal for a Uniaxial Tensile Test

Srihari Dodla, and V. Anirudh p. 1768  abstract

Prediction of Welding Mode for the Effect of Plasma Gas Flow Rate on the Mechanical and Microstructural Characteristics of Plasma Arc Welded Titanium Alloy Joints

T. Pragatheswaran, S. Rajakumar, and V. Balasubramanian p. 1776  abstract

Effects of LPSO Mg12YZn-Phase on Coefficient of Thermal Expansion and Mechanical Properties of Mg–Y–Zn Alloys

Wang Ling, Li Bing, Zuo Xiuyuan, Liu Ying, Zhao Mei, Liu Yang, Wang Fudong, Wang Lei, and Mi Pengyu p. 1785  abstract

Effect of Current Density on the Wear Resistance of Ceramic Coatings Formed on 7075 Aluminum Alloy via Microarc Oxidation

J. T. Wang, A. X. Liu, Y. K. Zhang, L. Xie, M. T. He, Y. L. Lu, K. Y. Luo, K. J. Hu, G. Z. Li, and M. Z. Wang p. 1791  abstract