Contents

The Physics of Metals and Metallography

Vol. 124, No. 13, 2023

Electrical and Magnetic Properties

Effect of Nb Doping on Thermoelectric Properties of TiNiSn Half-Heusler Alloy Prepared by Microwave Method

Rui-Peng Zhang, Lin Bo, Xing-Long Wang, Wen-Ying Wang, Jun-Liang Zhu, Ling-Hao Zhao, Min Zuo and De-Gang Zhao p. 1341  abstract

Comparative Study of Structural and Opto-Electric Features of Environment Friendly AlSb Screen Printed and Brush Plated Films

Sweta Shukla, Dhirendra Kumar Sharma, Deepika Gaur, Kapil Kumar Sharma and Vipin Kumar p. 1351  abstract

Structure, Phase Transformations, and Diffusion

Effect of Platinum Addition on Microstructure and Oxidation Behavior of Ni3Al-Base Alloys

Y. R. Cao, J. J. Shi, G. Y. Zhou, Z. X. Zhang, X. L. Zou, X. G. Lu and G. H. Cao p. 1357  abstract

Effect of Phase Formation on Mechanical Properties of the Joint AA6061 to AA2024 by TLP

A. Anbarzadeh, H. Sabet and A. R. Geranmayeh p. 1366  abstract

Hierarchical Heterogeneity in Bulk Metallic Glasses Rejuvenated by Cryogenic Thermal Cycling

Yihao Wang, Liqiao Yue, Gongji Yang, Mingqin Xu and Jiaojiao Yi p. 1375  abstract

Effect of Mg Content Change on the Production of Closed-Cell Aluminum Alloy Foam by Selective Laser Melting

Mengxuan Xu, Jintao An, Changjun Chen and Min Zhang p. 1380  abstract

Microstructure and Texture of Ultra-High Purity Copper under Changed Rolling Strain Paths and Subsequent Recrystallization Annealing

Y. P. Ding, M. Zhang, S. Y. Zhou, H. Y. Fan, S. F. Liu, C. H. Ran and X. L. Yuan p. 1392  abstract

An Atomistic Structure of Cementite (M3C, M = Fe, Cr, Mn) in Carbon Steel

Xiangyu Wu, Qianren Tian, Wei Shen, Xiangyu Xu and Jianxun Fu p. 1404  abstract

Evaluating the Spatial and Size Distributions of Flat Precipitates in Diffusion-Controlled Precipitation Processes

M. Yu. Kolesnik and T. N. Aliev p. 1414  abstract

Study on the Micro-Texture and Anisotropy of a Cold-Rolled and Intercritically Annealed DP800 Steel

H. Ashrafi and S. E. Aghili p. 1426  abstract

Wear Performances of Hypereutectoid P/M Steels Subjected to Different Heat Treatments

Ahmet Güral, Kevser Ceyda Taşkıran, Onur Altuntaş and Tolga Yılmaz p. 1433  abstract

Microstructure Characteristic and Evolution Mechanism of Cu–Ni–P Alloys under Different Cooling Rate

Min Zuo, Wenli Xia, Yongli Li, Tongtong Liu, Yan Ju, Chengcheng Xu and Degang Zhao p. 1443  abstract

Effect of Self-Inoculation Treatment on Microstructure and Mechanical Properties of Eutectic Al–Si Alloy

Ze Zhu, Hongbao Li, Ya Liu, Jianhua Wang and Xuping Su p. 1454  abstract

Ti-Alloying Effect on Crystallization Behavior of Zr72.5Al10Fe17.5 Metallic Glass

Liqiao Yue, Yihao Wang, Xia Li, Gongji Yang, Mingqin Xu, Zongzhen Li and Jiaojiao Yi p. 1464  abstract

Electrochemical Properties of TiAl-Based Alloys

Y. Garip and O. Ozdemir p. 1472  abstract

Precipitation Behavior of Primary Carbide in H13 Bloom Die Steel

Dengping Ji, Yi Wang, Haoran Zhu and Jianxun Fu p. 1482  abstract

Study on Nucleation and Growth of Columnar Grains in Non-Oriented Steel by Phase Transformation

L. Xie, X. Y. Liu, Y. X. Xu, M. T. He, J. T. Wang, J. Wang, M. Z. Wang, K. J. Hu, P. J. Li, C. Liu and C. F. Yao p. 1492  abstract

Strength and Plasticity

Effect of Cold-Drawing Deformation on the Microstructure and Properties of AA2024-T8

Y. X. Jia, R. M. Su, W. J. Zhang, G. L. Li, Y. D. Qu and R. D. Li p. 1501  abstract

Strengthening Mechanisms of Rails’ Surface in Ultra Long-Term Operation

R. V. Kuznetsov, V. E. Gromov, Yu. F. Ivanov, O. A. Peregudov, Yu. A. Shliarova, V. E. Kormyshev and A. P. Semin p. 1509  abstract

Influence of Friction Stir Welding Speed on Barkhausen Noise Emission from Steel

Avinash Ravi Raja, Sudesh Singh, Meghanshu Vashista and Mohd Zaheer Khan Yusufzai p. 1515  abstract

Research Progress on Prediction Models of Plastic Deformation and Ductile Fracture of Titanium Alloy

Rui Feng, Minghe Chen, Lansheng Xie, Youlin Bao and Yan Ge p. 1524  abstract

Effect of Minor Sb Additions on Thermal Properties, Microstructure and Microhardness of Sn–Ag–Cu High-Temperature Solder Alloys

Sezen Aksöz, Fadimana Öcal, Pınar Ata Esener, Esra Öztürk and Necmettin Maraşlı p. 1547  abstract

Microstructure and Properties of Cu–Ti Alloys Prepared by Aluminothermic Reaction and Subsequent Rolling

Yuehong Zheng, Sijia Zhu, Haoyang Gao, Jie Tang, Peiqing La, Faqi Zhan and Min Zhu p. 1555  abstract

Rate-Dependent Compressive Behaviour of SiC−B4C−Al Hybrid Composites

Tulsi Chouhan and Manoj Soni p. 1567  abstract

Microstructural Evolution and Mechanical Behavior of SP-700Ti Alloy during Superplastic Deformation

M. Morakabati and Amir Hossein Sheikhali p. 1579  abstract

Research on the Choice of Cooling Method for a Rare-Earth Wrought Magnesium Alloy Considering Temperature Distribution, Hardness and Microstructure

Qiumin Xie, Yunxin Wu, Yuanzhi Wu, Shunli Peng and Zhongyu Yuan p. 1588  abstract

The Influence of Nickel Addition on Properties of Sn–4.0Zn–0.7Cu Lead-Free Solder

Panisara Sukhontapatipak and Phairote Sungkhaphaitoon p. 1597  abstract

Investigation of the Effects of Sandblasting, Acid Etching, and Anodizing Parameters in the SLA + Anodizing on the Surface Treatment of Titanium Dental Implant Fixtures

Ehsan Anbarzadeh and Bijan Mohammadi p. 1606  abstract

The Effect of Grit Blasting on Surface Roughness and Hardness of Magnesium Alloy AZ31B: A Statistical Study

F. Hussain, M. U. Manzoor, M. Kamran and M. T. Z. Butt p. 1620  abstract

Effects of Bi Inclusion on Tensile Mechanical Property and Deformation Mechanism of Nanopolycrystalline Fe: A Molecular Dynamics study

Jingcheng Zhang, Fazhan Wang, Minggang Wang, Hongbo Wang, Zhen Chen and Yixuan Wang p. 1632  abstract