Vol. 121, No. 13, 2020

The Physics of Metals and Metallography

Evolution of the Microstructure and Properties for 2000 MPA Bridge Cable Steel

Fangyu Huang, Siqian Bao, Gang Zhao, Fan Zhang, Meng He and Xi Qu p. 1241 abstract

Study of Transformation Kinetics for Austempered Gray Cast Iron

Y. Pan, B. Wang, X. Han, N. Lyu, Y. Liu, F. Yang, J. Hou and G. C. Barber p. 1249 abstract

Particle Dissolution and Recrystallization Progress of Al–Mg–Si–Cu Alloy during Solution Treatment

X. F. Wang, M. X. Guo, H. B. Wang, W. F. Peng, Y. G. Wang, J. S. Zhang and L. Z. Zhuang p. 1258 abstract

Characterization, Formation Mechanism, and Thermodynamics of Nanocrystalline Ni₃Si Powder Prepared by Mechanical Alloying

H. Chen, Y. T. Liu, Y. Zhao and Z. W. Wang p. 1266 abstract

The Analysis of Microstructure and Texture Evolution in Polycrystal and Single Crystals of Nickel after Hydrostatic Extrusion Process

M. Koralnik, B. Adamczyk-Cieslak, D. Moszczynska, M. Kulczyk and J. Mizera p. 1273 abstract

XRD Line Profile Analysis of Ball Milled ODS Ferritic Steel Powder Consolidated by Hot Isostatic Pressing

K. Nowik and Z. Oksiuta p. 1280 abstract

Effects of Reciprocating Speed on Corrosive Wear Behavior of Cold-Sprayed Al Coating on Offshore Platforms

Zhang Jing and Kong Dejun p. 1288 abstract

Characterizing Microstructure Evolution and Correlated Properties of an Al–Mg–Si Alloy during Nonisothermal Aging

Y. Y. Zheng, B. H. Luo, C. He and Z. H. Bai p. 1295 abstract

Production of NiAl–(Cr,Mo) Eutectic Alloys and Their Cyclic Oxidation Behavior at 800–1000°C

Y. Garip, C. Ceper, N. Ergin, A. S. Demirkıran and O. Ozdemir p. 1301 abstract

Microstructure Characterization and Mechanical Properties of Mg/Al Dissimilar Joints by Friction Stir Welding with Zn Interlayer

Xiaoli Zhong, Yong Zhao, Jihong Pu, Keng Yan, HaiMei Liang and Shuming Song p. 1309 abstract

Microstructural and Mechanical Analysis of an 1100 Aluminum Alloy Processed by Repetitive Corrugation and Straightening

E. E. Alvarado, I. A. Figueroa and G. Gonzalez p. 1319 abstract

Influence of Austenitizing Parameters on the Microstructures and Mechanical Properties of 22MnB5 Hot Stamping Steel Produced by TSCR Process

Liang Zhou, Yaowen Xu, Xinping Mao, Gengwei Yang, Siqian Bao, Gang zhao and Xiaodong Miao p. 1326 abstract

Microstructure, Hardness, and Wear Characteristics of Al–Si–Cu/Al₂O₃ Composites by Squeeze Casting

E. A. Mohamed, F. Fairoz, M. T. Abou El-khair and A. Daoud p. 1334 abstract

Residual Stresses and Microstructural Features of Rotary-Friction-Welded from Dissimilar Medium Carbon Steels

Elena Priymak, Zakaria Boumerzoug, Anna Stepanchukova and Vincent Ji p. 1339 abstract

Investigation of Microstructure and Wear Resistance of AZ31–SiO₂ Surface Nanocomposite by Friction Stir Processing

M. Rezaeian-delouei, H. Abdollah-Pour, M. Tajally and S. M. Mousavizade p. 1347 abstract

Microstructures, Aging Behavior and Thermal Expansion of 7075 Al–Silica Particle Waste Composite Foams Produced with Recycled Aluminum Cans

A. Daoud, M. T. Abou El-Khair, F. Fairouz, E. Mohamed and A. Lotfy p. 1358 abstract